Skip to content

Latest commit

 

History

History
154 lines (130 loc) · 8.33 KB

readme.md

File metadata and controls

154 lines (130 loc) · 8.33 KB
Raw

Die photo

Data Chip 1811BM1 (cloned DC302)

Die photo

Control Chip 1811ВУ1 (cloned DC303)

Die photo

MMU Chip 1811BT1 (cloned DC304)

Die photo

Links to raw panoramic photos (CAUTION: files are VERY LARGE, browser might hang):

The original DEC F-11

"The F-11 (code name: the Fonz) was DEC's second microprocessor design, and the first to be architected by DEC personnel in 1979. Duane Dickhut was the project leader, Bill Johnson was lead design engineer for the Data chip, and Burt Hashizume wrote most of the microcode. The MMU was designedby Dan Dobberpuhl's consulting company.

The F-11 was substantially more ambitious than the LSI-11. It implemented the entire PDP-11/34 architecture, including FP11-compatible floating point and KT11-compatibile memory management. It targeted 3X the performance of the LSI-11, at almost the same clock rate. It provided physical address extension out to 22b, the first system to do so after the PDP-11/70. It implemented the PDP-11 Commercial Instruction Set as an option, the only other implementation was for the PDP-11/44.

Like the LSI-11, the F-11 was a chip set consisting of three designs, one of which could be replicated: the Control Chip (up to nine supported), the Data chip, and the MMU chip. It was implemented in AMI's 6u NMOS process and operated at 3.6Mhz (280ns microcycle). The DEC PDP-11/23 computer is based on the F-11 "Fonz" chipset" - Bob Supnik.

The 1811 series is the Soviet clone of F-11 chipset, produced by VFSD ("Voronezh Factory of Semiconductor Devices" - "Воронежский Завод Полупроводниковых Приборов") behind the Iron Curtain in the second half of 1980th.

  • 1811BM1 / DC302 - 7922 gates
  • 1811ВУх / ВС303 - ~12600 gates (depends on PLA/ROM content)
  • 1811BT1 / DC304 - 10383 gates

Models passed the factory tests

The factory tests passed by the model in simulation and on real FPGA:

  • jkdad0 - MMU diagnostics
  • jkdbd0 - instruction set (BIS/EIS)
  • jkdcb0 - FPP diagnostics, part 1
  • jkddb0 - FPP diagnostics, part 2

Documentation

Directory structure

\hdl

  • the directory contains HDL-related materials, sources, and sample projects for Quartus and ISE. There are three models: original asynchronous, refactored synchronous and Wishbone compatible

\hdl\org

  • asynchronous Verilog HDL model is as close as possible to the original gate-level schematics. In practice can be used for modeling purposes only, because processor contains latches (note, it differs from flip-flop), those work in non-reliable fashion on synchronous FPGAs. Nonetheless, this model is included in the package as a demo of the closest possible approximation to the original die. Maybe not synthesizable with some tools, simulation only.

\hdl\syn

  • synchronous Verilog HDL model, the frontend bus is Q-Bus, uses single clock to operate, does not contain latches, MMU and FPP register arrays are optimized for inferred block memory and whole model can be synthesized for synchronous FPGAs. The master generator (mclk) is refactored, high and low phases take single clock, hence, master clock is half of oscillator clock (no a quarter or slower as in original F11). This model is intermedate step for final Wishbone-compatible version.

\hdl\wbc

  • synchronous Wishbone compatible version of F-11 synchronous core uses a single clock, is FPGA-optimized, and follows the original command execution timings, is intended for SoC building. Model uses at least two core clocks to execute single microcode instruction.

\cad\f11 (moved to dedicated repo)

  • topology in Sprint Layout format
  • topology in PCD-2004 pcb format
  • schematics in PCD-2004 sch format
  • schematics in pdf (gate level)

\rom

  • MicROM binary images (checked against read from real chips)
  • tools (Microcode Disassemler, written in Python)

\tst

  • test software, including restored factory test sources and ROM images. Build batch should be run before building FPGA bitstream to include test software image

How to simulate

  • run "tst\build.bat test" to prebuild desired test software image ("test" is a sample)
  • run ModelSim simulator
  • set "f11/hdl/org/sim/de0" as working directory in ModelSim (File->Change Directory)
  • execute "do run.do" console command
  • wait, simulation may take some time till complete
  • see the results in waveform and console output

Implemented resources

  • RAM 16Kx16bit at 0000008 with initialized content from test.mif file
  • TTY at 1775608, 608/648 vector interrupts, tx/rx with cts/rts handshake, 115200/8/N/1, RS-232 levels (board dependent).
  • 50Hz system timer interrupt (IRQ2, edge sensitive, vector 1008), enabled by board switch[0], if timer is enabled the board led[0] lights
  • 4x7-segment display, segments attached to output registers at 1777148/1777158, see the test software source for the details
  • switches and buttons can be read from input register at 1777148
  • board button[0] is reset, short press less than 1 sec causes system reset, long press over 1 second simulates power reset (excluding RAM content)

Fmax and FPGA resources

  • Wishbone compatible F-11 core
  • CPU register file over flip-flops, MicROM in RAM blocks
  • MMU and FPP options are enabled (disabling of both typically frees ~30 percents of logic, ~20 percents of registers, ~70 percents of block memory and provides ~10 percents of Fmax gain)
  • FPP and MMU register files use RAM blocks
  • balanced area/speed optimization chosen
  • slow model, worst corner

All results are just approximate estimations by synthesis tools (Quartus/XST/Vivado) on sample projects.

Board FPGA Family Fmax LUTs FFs MEM
DE0 EP3C16F484C6N Cyclone III 115 MHz 2843 752 7 M9K
DE1 EP2C20F484C7N Cyclone II 64 MHz 2753 728 11 M4K
DE2-115 EP4CE115F29C7N Cyclone IV 97 MHz 2794 720 7 M9K
DE10-LT 10M50DAF484C7G Max 10 86 MHz 2691 736 7 M9K
QC5 5CEFA2F23I7N Cyclone V 106 MHz 2114 1099 6 M10K
QC10 10CL006U256CN8 Cyclone 10 79 MHz 2677 724 7 M9K
EG4 EG4S20BG256 Eagle EG4S20 86 MHz 3821 830 9 M9K
QA7 XC7A35TFTG256-1 Artix 7 100 MHz 3798 1536 8.5 BR
QK7 XC7K325TFFG676-1 Kintex 7 133 MHz 3073 1380 8.5 BR