ap.md

{::options parse_block_html="true" /}

# Making Tessel An Access Point

A typical WiFi setup consists of a couple of devices: a modem, which is connected by wire to the internet, and a wireless access point (also called a WAP or router), wired to the modem, which directs requests and responses between every device on the network.

As explained in the wifi tutorial, Tessel 2 can easily connect to wifi networks using the command line tool. If your computer is connected to the same WAP as the Tessel, then the two devices can talk to each other. This is how we push code to Tessel over LAN (local area network).

The connection setup looks about like this:


This is fine and dandy if we want to use Tessel in a place where there's a modem and WAP already set up, but what happens when that's not possible?

We can't access the Internet without a modem, but we can create a LAN connection between devices by turning Tessel 2 into a WAP. Devices on the network can all talk to each other, like this:


This tutorial shows you to turn Tessel into a wireless access point, thus creating your own local network.

---

In the terminal, run the following command:

t2 ap -n MyTessel

This will make an open, or password-less, wifi network called MyTessel.

Open the wifi setting of your computer, or a separate device like a smartphone or tablet, and scan for new devices to see and connect to this new network.


**Bonus:** Create an network that requires a password. (Hint: for information about making a secure network, take a look at [the cli docs](https://tessel.io/docs/cli#usage).)

Prev: Tweet

Next: Build A Web Server