Skip to content

Latest commit

 

History

History
150 lines (109 loc) · 6.31 KB

README.md

File metadata and controls

150 lines (109 loc) · 6.31 KB
Raw

README

Build Status

This is a fork of ioerror's version of sslscan (the original readme of which is included below). Changes are as follows:

  • Highlight SSLv2 and SSLv3 ciphers in output.
  • Highlight CBC ciphers on SSLv3 (POODLE)
  • Highlight RC4 ciphers in output.
  • Highlight GCM ciphers as good in output.
  • Highlight NULL (0 bit), weak (<40 bit) and medium (40 < n <= 56) ciphers in output.
  • Highlight anonymous (ADH and AECDH) ciphers in output (purple).
  • Hide certificate information by default (display with --get-certificate).
  • Hide rejected ciphers by default (display with --failed).
  • Added TLSv1.1 and TLSv1.2 support (merged from twwbond/sslscan).
  • Compiles if OpenSSL does not support SSLv2 ciphers (merged from digineo/sslscan).
  • Supports IPv6 hostnames (can be forced with --ipv6).
  • Check for TLS compression (CRIME, disable with --no-compression).
  • Disable cipher suite checking (--no-ciphersuites).
  • Disable coloured output (--no-colour).
  • Removed undocumented -p output option.
  • Added check for OpenSSL HeartBleed (CVE-2014-0160, disable with --no-heartbleed).
  • Flag certificates signed with MD5 or SHA-1, or with short (<2048 bit) RSA keys.
  • Support scanning RDP servers with --rdp (credit skettler).
  • Added option to specify socket timeout.
  • Added option for static compilation (credit dmke).
  • Added --sleep option to pause between requests.
  • Disable output for anything than specified checks (--no-preferred).
  • Determine the list of CAs acceptable for client certificates (--show-client-cas).
  • Experimental build support on OSX (credit MikeSchroll)
  • Flag some self-signed SSL certificates.
  • Experimental Windows support (credit jtesta).
  • Display EC curve names and DHE key lengths with OpenSSL >= 1.0.2 (--no-cipher-details)
  • Flag weak DHE keys with OpenSSL >= 1.0.2 (--cipher-details)
  • Flag expired certificates
  • Flag TLSv1.0 ciphers in output as weak.
  • Experimental OSX support (static building only)

Building on Windows

Thanks to a patch by jtesta, sslscan can now be compiled on Windows. This can either be done natively or by cross-compiling from Linux. See INSTALL for instructions.

Note that sslscan was originally written for Linux, and has not been extensively tested on Windows. As such, the Windows version should be considered experimental.

Pre-build cross-compiled Windows binaries are available on the GitHub Releases Page.

Building on OS X

There is experimental support for statically building on OS X, however this should be considered unsupported. You may need to install any dependencies required to compile OpenSSL from source on OS X. Once you have, just run:

make static

OpenSSL issues

Statically linking a custom OpenSSL build

It is possible to ignore the OpenSSL system installation and ship your own version. Although this results in a more resource-heavy sslscan binary (file size, memory consumption, etc.), this allows to enable both SSLv2 and SSLv3 ciphers. In comparison to the method of repackaging the Debian build, this custom OpenSSL build won't affect other tools on the same system, as they would use the version packaged by the distro's maintainers.

To compile your own OpenSSL version, you'll probably need to install the OpenSSL build dependencies:

apt-get install build-essential git
apt-get build-dep openssl

then run

make static

which will clone the OpenSSL repository, and configure/compile/test OpenSSL prior to compiling sslscan.

Please note: Out of the box, OpenSSL cannot compiled with clang without further customization (which is not done by the provided Makefile). For more information on this, see Modifying Build Settings in the OpenSSL wiki.

You can verify whether you have a statically linked OpenSSL version, if

./sslscan --version

looks a bit like

    1.x.y-...-static
    OpenSSL 1.1.0-dev xx XXX xxxx

(pay attention to the -static suffix and the 1.1.0-dev OpenSSL version).

Building on Kali

Kali now ships with a statically built version of sslscan which supports SSLv2.

The package can be found in the Kali Git Repository.

If for whatever reason you can't install this package, follow the instructions above for statically building against OpenSSL.

Building on Debian

It is recommended that you statically build sslscan using the instructions listed above. If this is not an option and you want to compile your system OpenSSL with support for legacy protocols such as SSLv2 and SSLv3 then follow the instructions below.

Note that many modern distros (including Debian) ship with a version of OpenSSL that disables support for SSLv2 ciphers. If sslscan is compiled on one of these distros, it will not be able to detect SSLv2.

This issue can be resolved by rebuilding OpenSSL from source after removing the patch that disables SSLv2 support.

The build_openssl_debian.sh script automates this process for Debian systems. It has been tested on Debian Squeeze/Wheezy; it may work on other Debian based distros, but has not been tested. The built version of OpenSSL will be installed using dpkg.

If it is not possible to rebuild OpenSSL, sslscan will still compile (thanks to a patch from digineo/sslscan, based on the debian patch). However, a warning will be displayed in the output to notify the user that SSLv2 ciphers will not be detected.

Original (ioerror) README

This is a fork of sslscan.c to better support STARTTLS.

The original home page of sslscan is:

http://www.titania.co.uk

sslscan was originally written by:

Ian Ventura-Whiting

The current home page of this fork (until upstream merges a finished patch) is:

http://www.github.com/ioerror/sslscan

Most of the pre-TLS protocol setup was inspired by the OpenSSL s_client.c program. The goal of this fork is to eventually merge with the original project after the STARTTLS setup is polished.

Some of the OpenSSL setup code was borrowed from The Tor Project's Tor program. Thus it is likely proper to comply with the BSD license by saying: Copyright (c) 2007-2010, The Tor Project, Inc.