[TOC]
This document is "descriptive/post-factual" in that it documents pratices that are in use; it is not "definitive/pre-factual" in prescribing practices.
This means that when a procedure changes, it is agreed upon, then put into practice, and then documented here. If this document doesn't match reality, it's the document that needs to be updated, not reality.
The master Git for PROJECT resides on Github at https://github.com/PROJECT/XXX
There is one main branch for development and a release branch for each major release.
New contributions are done against the head of the master branch. The CI systems will pick up the Github Pull Requests or the new patch from Patchwork, run some basic build and functional tests.
For each major release (1.0, 1.1 etc) a new release branch is created based on the master.
There was an attempt to use a "develop" branch automatically maintained by the CI system. This is not currently in active use, though the system is operational. If the "develop" branch is in active use and this paragraph is still here, this document obviously wasn't updated.
The core of PROJECT is written in C (gcc or clang supported). A few non-essential scripts are implemented in Perl and Python. PROJECT requires the following tools to build distribution packages: automake, autoconf, texinfo, libtool and gawk and various libraries (i.e. libpam and libjson-c).
If your contribution requires a new library or other tool, then please highlight this in your description of the change. Also make sure it’s supported by all PROJECT platform OSes or provide a way to build without the library (potentially without the new feature) on the other platforms.
Documentation should be written in Tex (.texi) or Markdown (.md) format with preference on Markdown.
- Format code (see Code Styling requirements)
- Verify and acknowledge license (see License for contributions)
- Test building with various configurations:
buildtest.sh
- Verify building source distribution:
make dist(and try rebuilding from the resulting tar file)
- Run DejaGNU unit tests:
make test
- Document Regression Runs and plans for continued maintenance of the feature
The changelog will be the base for the release notes. A changelog entry for your changes is usually not required and will be added based on your commit messages by the maintainers. However, you are free to include an update to the changelog with some better description. The changelog will be the base for the release notes.
PROJECT is under a “GPLv2 or later” license. Any code submitted must be released under the same license (preferred) or any license which allows redistribution under this GPLv2 license (eg MIT License).
Submissions to PROJECT require a “Signed-off” in the patch or git commit. We follow the same standard as the Linux Kernel Development.
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; or
(b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; or
(c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it.
(d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved.
We have the same requirements for using the signed-off-by process as the Linux kernel. In short, you need to include a signed-off-by tag in every patch:
Signed-off-by:this is a developer's certification that he or she has the right to submit the patch for inclusion into the project. It is an agreement to the Developer's Certificate of Origin (above). Code without a proper signoff cannot be merged into the mainline.
Please make sure to have a Signed-off-by: in each commit/patch or the patches
will be rejected until this is added.
If you are unfamiliar with this process, you should read the official policy at kernel.org and you might find this article about participating in the Linux community on the Linux Foundation website to be a helpful resource.
We've documented where we would like to have the different fixes applied at https://github.com/FRRouting/frr/wiki/Where-Do-I-create-a-Pull-Request-against%3F If you are unsure where your submission goes, look at that document or ask the question of a maintainer.
Preferred submission of code is by using a Github Pull Request against the Develop branch. Code submitted by Pull Request will have an email generated to the PROJECT-devel mailing list for review and the submission will be automatically tested by one or more CI systems. Only after this test succeeds (and the submission is based on the head of the develop branch), then it will be automatically merged into the develop branch. In case of failed tests, it is up to the submitter to either amend the request with further commits or close, fix and create a new pull request.
Further (manual) code review and discussion happens after the merge into the develop branch.
As an alternative submission, a patch can be mailed to the PROJECT-Devel mailing list. Preferred way to send the patch is using git send-mail. Patches received on the mailing list will be picked up by Patchwork and tested against the latest develop branch. After a further ACK by someone on the mailing list, the patch is then merged into the develop branch.
Further (manual) code review and discussion happens after the merge into the develop branch.
The recommended way to send the patch (or series of NN patches) to the list is by using ‘git send-email’ as follows (assuming they are the most recent NN commit(s) in your git history:
git send-email -NN --annotate --to=XXX-Devel@XXX.org
If your commits do not already contain a Signed-off-by line, then use the
following version to add it (after making sure to be able to agree to the
Developer Certificate of Origin as outlined above):
git send-email -NN --annotate --signoff --to=XXX-Devel@XXX.org
Submitting multi-commit patches as a Github Pull Request is strongly encouraged and will allow your changes to merge faster
- Watch for Continuous Integration (CI) Test results
- You should automatically receive an email with the test results within less than 2 hrs of the submission. If you don’t get the email, then check status on the github pull request (if submitted by pull request) or on Patchwork at https://patchwork.PROJECT.org (if submitted as patch to mailing list).
- Please notify PROJECT-Devel mailing list if you think something doesn’t work
- If the tests failed:
- In general, expect the community to ignore the submission until the tests pass.
- It is up to you to fix and resubmit.
- This includes fixing existing dejagnu (“make test”) tests if your changes broke or changed them.
- It also includes fixing distribution packages for the failing platforms (ie if new libraries are required)
- Feel free to ask for help on PROJECT-Devel list
- Go back to the submission process and repeat until the tests pass.
- If the tests pass:
- If the changes are done as a pull request, then they should be automatically merged to the develop branch.
- Changes sent to mailing list require a manual ACK to be merged and should be merged within 2 weeks. If you don’t see the merge or any reason/discussion on PROJECT-Devel, then please ask.
- Watch out for questions on the mailing list. At this time there will be a manual code review and further (longer) tests by various community members.
- Your submission is done once it is merged to the master branch. (which should happen every few weeks from the develop branch)
New files need to have a Copyright header (see License for contributions above) added to the file. Preferred form of the header is as follows:
/*
* Title/Function of file
* Copyright (C) YEAR Author’s Name
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; see the file COPYING; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <zebra.h>
When adding copyright claims for modifications to an existing file, please preface the claim with "Portions: " on a line before it and indent the "Copyright ..." string. If such a case already exists, add your indented claim immediately after. E.g.:
Portions:
Copyright (C) 2010 Entity A ....
Copyright (C) 2016 Your name [optional brief change description]
Coding style standards in FRR vary depending on location. Pre-existing code uses GNU coding standards. New code may use Linux kernel coding style.
GNU coding style apply to the following parts:
- lib/
- zebra/
- bgpd/
- ospfd/
- ospf6d/
- isisd/
- ripd/
- ripngd/
- vtysh/
Linux kernel coding style applies to:
- nhrpd/
- watchfrr/
- pimd/
- lib/{checksum,hook,imsg-buffer,imsg,libfrr,md5,module,monotime,queue}.[ch]
BSD coding style applies to:
- ldpd/
Whitespace changes in untouched parts of the code are not acceptable in patches that change actual code. To change/fix formatting issues, please create a separate patch that only does formatting changes and nothing else.
It is acceptable to rewrap entire files to Linux kernel style, but this MUST come as a separate patch that does nothing other than this reformatting.
For GNU coding style, Indentation follows the result of invoking GNU indent:
indent -nut -nfc1 file_for_submission.c
Originally, tabs were used instead of spaces, with tabs are every 8 columns. However, tab interoperability issues mean space characters are now preferred for new changes. We generally only clean up whitespace when code is unmaintainable due to whitespace issues, to minimise merging conflicts.
These styles are documented externally:
They are relatively similar but differ in details.
pimd deviates from Linux kernel style in using 2 spaces for indentation, with
Tabs replacing 8 spaces, as well as adding a line break between } and else.
It is acceptable to convert indentation in pimd/ to Linux kernel style, but
please convert an entire file at a time. (Rationale: apart from 2-space
indentation, the styles are sufficiently close to not upset when mixed.)
Unlike GNU style, these styles use tabs, not spaces.
Many users access PROJECT via binary packages from 3rd party sources; compile-time code puts inclusion/exclusion in the hands of the package maintainer. Please think very carefully before making code conditional at compile time, as it increases regression testing, maintenance burdens, and user confusion. In particular, please avoid gratuitous --enable-… switches to the configure script - typically code should be good enough to be in PROJECT, or it shouldn’t be there at all.
When code must be compile-time conditional, try have the compiler make it conditional rather than the C pre-processor - so that it will still be checked by the compiler, even if disabled. I.e. this:
if (SOME_SYMBOL)
frobnicate();
rather than
#ifdef SOME_SYMBOL
frobnicate ();
#endif /* SOME_SYMBOL */
Note that the former approach requires ensuring that SOME_SYMBOL will be
defined (watch your AC_DEFINEs).
Debugs are an important methodology to allow developers to fix issues found in the code after it has been released. The caveat here is that the developer must remember that people will be using the code at scale and in ways that can be unexpected for the original implementor. As such debugs MUST be guarded in such a way that they can be turned off. This PROJECT has the ability to turn on/off debugs from the CLI and it is expected that the developer will use this convention to allow control of their debugs.
CLI's are a complicated ugly beast. Additions or changes to the CLI should use a DEFUN to encapsulate one setting as much as is possible. Additionally as new DEFUN's are added to the system, documentation should be provided for the new commands.