Skip to content

Latest commit

 

History

History
26 lines (15 loc) · 1.7 KB

README.md

File metadata and controls

26 lines (15 loc) · 1.7 KB
Raw

Hover Distance Limiter Plugin for OpenTabletDriver

Limits minimum and maximum hover distance.

Explanation of the values:

Minimum Hover Distance: The minimum HoverDistance where input is sent. (When Use ReportID Workaround is enabled, ReportID is used.)

Maximum Hover Distance: The maximum HoverDistance where input is sent. (When Use ReportID Workaround is enabled, ReportID is used.)

Use ReportID Workaround: Uses ReportID to filter input instead of HoverDistance. Many tablets do not send HoverDistance but will send general pen detection strength readings which can be used to limit hover distance.

Use Pressure Range Cutoff: Uses Pressure to filter input along with either HoverDistance or ReportID.

Minimum Pressure: The minimum Pressure where input is sent. (Only used when Use Pressure Range Cutoff is enabled.)

Maximum Pressure: The Maximum Pressure where input is sent. (Only used when Use Pressure Range Cutoff is enabled.)


How to find HoverDistance, ReportID or Pressure:

  • Open tablet debugger by going to Tablets > Tablet debugger...

  • Put your pen within detection range of your tablet

  • The Tablet Report box will show HoverDistance, ReportID and Pressure which is the raw value for each.

    (If a HoverDistance is not shown, your tablet is not compatible with the default filtering method. Enabling Use ReportID Workaround and using ReportID can be used on some tablets which do not send HoverDistance.)