Drives:Completely missing (Incl. smart and temperature)!

[GoogleCodeExporter]

What is the expected output? What do you see instead?

I hope, that SMART and drives with their temperature are normally show!?


What version of the product are you using? On what operating system?

I am using 0.1.30.0 BETA on "Windows Server 2008 R2", en, x64


Please provide any additional information below.

Currently I am using Speedfan, having a similar problem. MAY be, the
problems appears, after I installed Intel Storage Manager and managing an
RAID5 array. The RAID5 contains three SATA drives, which are not shown by
Speedfan. My system drive is a Corsair SSD, which is displayed by Speedfan
including SMART data [but no temperature]. OpenHardwareMonitor does not
show any drives.


Please attach an OpenHardwareMonitor.Report.txt, which can be created with
"File / Save Report" in the Open Hardware Monitor folder.

My report was generated in a RDP session, running a local admin account.

Original issue reported on code.google.com by mabr...@gmail.com on 26 Apr 2010 at 2:30

Attachments:

• RX--OpenHardwareMonitor.Report--20100426.txt

[GoogleCodeExporter]

To access the SMART data on RAID arrays is more complicated. As far as I know it
requires more detailed knowledge about the RAID controller, to have the SMART
communication routed to the individual drives.

The Open Hardware Monitor lists only drives where the SMART attributes can be 
read,
and where a Temperature attribute is found.

Original comment by moel.mich on 26 Apr 2010 at 6:06

[GoogleCodeExporter]

Ah !

Thanks for this notice:"where a temperature attribute is found" ...
I used the "gsmartcontrol" to find out, that my Corsair SSD [what a blame] does 
not
has this attrib!

But is this wise? Other important attributes may be watches as well, like sector
re-allocation etc. ??

++mabra

Original comment by mabr...@gmail.com on 26 Apr 2010 at 10:27

[GoogleCodeExporter]

I have no RAID and whatsoever but my two drives don't show up in OHM. Currently 
I'm using CrystalDiskInfo for monitoring them.

Original comment by jubel...@googlemail.com on 7 Jul 2010 at 5:31

Attachments:

• OpenHardwareMonitor.Report.txt
• diskinfo.Report.txt

[GoogleCodeExporter]

Yes this looks like a defect in the Open Hardware Monitor. I will have to add 
detailed information about the harddrives and SMART reading into the report, 
because right now nothing is written in cases where no SMART temperature is 
found.

It would be great if you can create another report as soon as I have improved 
the SMART report details. I will post a new built here soon.

Original comment by moel.mich on 7 Jul 2010 at 11:18

• Changed state: Accepted

[GoogleCodeExporter]

Can you test with the latest version 0.4.0 Beta once more and report on the 
status of this issue?

Original comment by moel.mich on 15 Jan 2012 at 3:38

• Changed state: NeedsInfo

[GoogleCodeExporter]

No drives at all.

Original comment by jubel...@googlemail.com on 29 Mar 2012 at 7:13

Attachments:

• OpenHardwareMonitor.Report.txt
• CrystalDiskinfo.Report.txt