diff --git a/2.3.cosmovisor.md b/2.3.cosmovisor.md index f488d1b6..749ab4e6 100644 --- a/2.3.cosmovisor.md +++ b/2.3.cosmovisor.md @@ -1,67 +1,58 @@ -# Cosmovisor setup guide for bitcanna-1 - +# Cosmovisor setup for `bitcanna-1` `Cosmovisor` is a small process manager for Cosmos SDK application binaries that monitors the governance module for incoming chain upgrade proposals. If it sees a proposal that gets approved, it stops the current binary, switch from the old binary to the new one, and finally restarts the node with the new binary. -This guide will explain how to install Cosmovisor and prepare for a future chain update. A full guide about Cosmovisor can be found [here](https://github.com/cosmos/cosmos-sdk/tree/master/cosmovisor). -> NOTE: This doc is updated to run with last version v1.4.5. Specific Upgrade Guide for v1.4.5 from v.1.3.1 is [here](https://github.com/BitCannaGlobal/bcna/blob/main/last_upgrade.md) +This guide will explain how to install Cosmovisor and prepare for a future chain update. A full guide about Cosmovisor can be found [here](https://github.com/cosmos/cosmos-sdk/tree/main/tools/cosmovisor). -## Step 1. Download Cosmovisor -You can build Cosmovisor from the source or download it from our GitHub repository. Detailed instruction to understand how it works [here](https://github.com/cosmos/cosmos-sdk/tree/master/cosmovisor#cosmosvisor). -### A) Download Cosmovisor +## Step 1. Install/update Cosmovisor +You can build Cosmovisor from the source or download it from the official GitHub repository. -To download Cosmovisor without having to compile it yourself, run the following command: -``` -cd ~ -wget https://github.com/cosmos/cosmos-sdk/releases/download/cosmovisor%2Fv1.1.0/cosmovisor-v1.1.0-linux-amd64.tar.gz -``` -Check sha256 sum -``` -sha256sum cosmovisor-v1.1.0-linux-amd64.tar.gz -``` -It must return: `9a6eb658404f28a3607a3d531821ca4a6501749aa483698847155f362e66859d` +The easy way is install with Go: -Unzip the file, give it the correct permissions and move it to your machine's PATH -``` -tar -xf cosmovisor-v1.1.0-linux-amd64.tar.gz -rm cosmovisor-v1.1.0-linux-amd64.tar.gz -chmod +x cosmovisor -sudo mv cosmovisor /usr/local/bin -``` -### B) Build from source +`go install cosmossdk.io/tools/cosmovisor/cmd/cosmovisor@v1.4.0` -To compile Cosmovisor from the source, you need to have `go` installed on your system. A full guide to install `go` can be found [here](https://golangdocs.com/install-go-linux). -Try this to install Cosmovisor from the source by pulling the cosmos-sdk repository, switch to the correct version and build it: -``` -git clone https://github.com/cosmos/cosmos-sdk.git -cd cosmos-sdk -git checkout cosmovisor/v1.1.0 -make cosmovisor -``` -The previous action builds Cosmovisor in the `/cosmovisor` directory, now let's move it to the system's PATH: +## Step 2. Setup Cosmovisor +> Version v1.2 and higher includes a new command that will create the required folder structure for you, so it will avoid you some extra steps + +1) Download & init the folders with the old genesis version BitCanna `v1.2` binary. ``` -sudo mv cosmovisor/cosmovisor /usr/local/bin +cd ~ +rm -f bcnad #delete the binary if exist to avoid version mixings +wget https://github.com/BitCannaGlobal/bcna/releases/download/v1.2/bcnad +chmod +x ./bcnad +#Set the necessaries VARs to start Cosmovisor (later you can add to .profile) +export DAEMON_NAME=bcnad +export DAEMON_RESTART_AFTER_UPGRADE=true +export DAEMON_HOME=${HOME}/.bcna +export DAEMON_RESTART_DELAY=30s +export UNSAFE_SKIP_BACKUP=true +export DAEMON_LOG_BUFFER_SIZE=512 + +#add this to continue to use bcnad for commands, this is optional +PATH="${HOME}/.bcna/cosmovisor/current/bin:$PATH" + +#start the initial configuration +cosmovisor init ./bcnad ``` -You can delete the `cosmos-sdk` folder +It should show something like: ``` -cd .. && rm -rf cosmos-sdk/ +11:46AM INF checking on the genesis/bin directory module=cosmovisor +11:46AM INF creating directory (and any parents): "/Users/test/.bcna/cosmovisor/genesis/bin" module=cosmovisor +11:46AM INF checking on the genesis/bin executable module=cosmovisor +11:46AM INF copying executable into place: "/Users/test/.bcna/cosmovisor/genesis/bin/bcnad" module=cosmovisor +11:46AM INF making sure "/Users/test/.bcna/cosmovisor/genesis/bin/bcnad" is executable module=cosmovisor +11:46AM INF checking on the current symlink and creating it if needed module=cosmovisor +11:46AM INF the current symlink points to: "/Users/t/.bcna/cosmovisor/genesis/bin/bcnad" module=cosmovisor ``` -## Step 2. Setup Cosmovisor -> Version v1.2 includes a new command that will create the required folder structure for you, check [here](https://github.com/cosmos/cosmos-sdk/blob/main/cosmovisor/README.md#initialization), we will create them manually: -1) Create new directories +2) Create directories for next upgrades ``` -mkdir -p ${HOME}/.bcna/cosmovisor/genesis/bin mkdir -p ${HOME}/.bcna/cosmovisor/upgrades/ruderalis/bin +mkdir -p ${HOME}/.bcna/cosmovisor/upgrades/strangebuddheads/bin/ +mkdir -p ${HOME}/.bcna/cosmovisor/upgrades/trichomemonster-ica/bin/ ``` -2) Download & copy the old genesis version BitCanna `v1.2` binary to Cosmovisor's genesis folder. -``` -cd ~ -rm -f bcnad #delete the binary if exist to avoid version mixings -wget https://github.com/BitCannaGlobal/bcna/releases/download/v1.2/bcnad -cp ./bcnad ${HOME}/.bcna/cosmovisor/genesis/bin/ -``` + 3a) Download & copy the next version `v.1.3.1` to the upgrades folder. This guide shows how to download the binary. If you want to build the binary from the source, detailed instructions can be found in the [README](https://github.com/BitCannaGlobal/bcna/blob/main/README.md) of our GitHub. @@ -92,7 +83,7 @@ This guide shows how to download the binary. If you want to build the binary fro ``` cd ~ -bcna_linux_amd64.tar.gz #delete old file if exist +rm bcna_linux_amd64.tar.gz #delete old file if exist wget -nc https://github.com/BitCannaGlobal/bcna/releases/download/v1.4.5/bcna_linux_amd64.tar.gz ``` Check the sha256sum. @@ -111,20 +102,48 @@ chmod +x bcnad ``` Move the newly built binary to the upgrades directory. ``` -mkdir -p ${HOME}/.bcna/cosmovisor/upgrades/strangebuddheads/bin/ mv ./bcnad ${HOME}/.bcna/cosmovisor/upgrades/strangebuddheads/bin/ ``` + +3c) **Download & copy the last version `v.1.5.3` to the upgrades folder**. +This guide shows how to download the binary. If you want to build the binary from the source, detailed instructions can be found in the [README](https://github.com/BitCannaGlobal/bcna/blob/main/README.md) of our GitHub. + +``` +cd ~ +rm bcna_linux_amd64.tar.gz #delete old file if exist +wget -nc https://github.com/BitCannaGlobal/bcna/releases/download/v1.5.3/bcna_linux_amd64.tar.gz +``` +Check the sha256sum. +``` +sha256sum bcna_linux_amd64.tar.gz +``` +It must return: `--------------------tda--------------------` + +Extract and verify that the version is:`1.5.3` +``` +rm -f ./bcnad #delete old file if exist +tar zxvf bcna_linux_amd64.tar.gz +rm bcna_linux_amd64.tar.gz +chmod +x bcnad +./bcnad version +``` +Move the newly built binary to the upgrades directory. +``` +mv ./bcnad ${HOME}/.bcna/cosmovisor/upgrades/trichomemonster-ica/bin/ +``` + + > If you build the binary from the code source move it to the same folder 4) Setup the current version link for Cosmovisor. > Very important decision now. Depending on your choice you should sync the chain using a snapshot file/service or sync from the scratch (very slow process but the only to get the whole original chain by yourself) * If you want to sync from the scratch (from block 1) you should do: ``` - ln -s -T ${HOME}/.bcna/cosmovisor/genesis ${HOME}/.bcna/cosmovisor/current + ln -sfn -T ${HOME}/.bcna/cosmovisor/genesis ${HOME}/.bcna/cosmovisor/current ``` * If you are going to sync using **(advanced users)** a snapshot file, StateSync or other you should point to the last version (v1.4.5) ``` - ln -s -T ${HOME}/.bcna/cosmovisor/upgrades/strangebuddheads ${HOME}/.bcna/cosmovisor/current + ln -sfn ${HOME}/.bcna/cosmovisor/upgrades/strangebuddheads ${HOME}/.bcna/cosmovisor/current ``` 5) To check if everything is OK, run: ``` @@ -133,7 +152,7 @@ ls .bcna/cosmovisor/ -lh The output should look like this: ``` total 8.0K -lrwxrwxrwx 1 user user 35 Jan 14 20:16 current -> /home/user/.bcna/cosmovisor/genesis +lrwxrwxrwx 1 user user 35 Jan 14 20:16 current -> /home/user/.bcna/cosmovisor/upgrades/strangebuddheads drwxrwxr-x 3 user user 4.0K Jan 14 20:09 genesis drwxrwxr-x 4 user user 4.0K Jan 14 20:15 upgrades ``` @@ -201,7 +220,7 @@ sudo systemctl enable cosmovisor.service && sudo systemctl start cosmovisor.serv 13) Check the logs to see if everything is OK. (ctrl + C to stop). ``` -sudo journalctl -uf cosmovisor +sudo journalctl -u cosmovisor -f -o cat ``` > You can speed up the syncing using a StateSync Server or a snapshot file. @@ -220,6 +239,7 @@ export DAEMON_RESTART_AFTER_UPGRADE=true export DAEMON_HOME=${HOME}/.bcna export UNSAFE_SKIP_BACKUP=true #if you want to skip automatic backup export DAEMON_LOG_BUFFER_SIZE=512 +export DAEMON_RESTART_DELAY=30s #add this to continue to use bcnad for commands, this is optional PATH="${HOME}/.bcna/cosmovisor/current/bin:$PATH" @@ -231,7 +251,7 @@ source .profile ``` 3) Now let's try Cosmovisor. -* Show Cosmovisor version: `cosmovisor run version` Will be `v.1.3.1` before the upgrade and `v1.4.5` after the upgrade +* Show Cosmovisor version: `cosmovisor run version` Will be `v.1.4.5` before the upgrade and `v1.5.3` after the upgrade ``` cosmovisor run version ``` @@ -253,3 +273,8 @@ For example: * Stop the service: `sudo service cosmovisor stop` * Restart the service: `sudo service cosmovisor restart` * Check the logs: `sudo journalctl -u cosmovisor -f` + + + + +###### tags: `cosmovisor`, `bitcanna` diff --git a/README.md b/README.md index 9158e0e9..c38d36ad 100644 --- a/README.md +++ b/README.md @@ -2,9 +2,9 @@ BitCanna provides a decentralized payment network, supply chain and trust network for the legal cannabis industry by utilizing the BCNA coin. -> Current version is v1.4.5 - strangeBuddheads - [update instructions from v1.4.2](https://github.com/BitCannaGlobal/bcna/releases/tag/v1.4.5) +> Current version (v1.4.5 strangeBuddheads) of our development uses Cosmos SDK v0.45.10 & Tendermint v0.34.22 & IBC-go v3.3.1 -> Last version (v1.4.5 strangeBuddheads) of our development uses Cosmos SDK v0.45.10 & Tendermint v0.34.22 & IBC-go v3.3.1 +> Next version: [Update scheduled for November 7th](https://github.com/BitCannaGlobal/bcna/blob/main/last_upgrade.md) These docs at Github are chain related. For more information about our coin, partners and roadmap visit: * Our website: https://www.bitcanna.io diff --git a/last_upgrade.md b/last_upgrade.md index b28cc768..479f01b1 100644 --- a/last_upgrade.md +++ b/last_upgrade.md @@ -1,4 +1,15 @@ -# MAINNET `bitcanna-1` Upgrade +# MAINNET `bitcanna-1` Upgrades + +## v1.5.3 codename `TrichomeMonster-ica` from v1.4.5 +> (Update scheduled for 7 November 2022 ~ 14.00h UTC) +* Source code refactored to deprecate `CosmosCMD` package from Ignite/CLI. +* InterChain Accounts module intregration. +* Last security and stability updates. + +> Note: this is a planned upgrade, chain **will halts** at block **5787420** +### For detailed instructions check the release doc: +* https://github.com/BitCannaGlobal/bcna/releases/tag/v1.5.3 + ## v1.4.5 from v1.4.2 (from Oct. 31th 2022) We've developed a new version with some updates (regarding SDK, Tendermint & IBC/go) to improve the security (Dragonberry) and stability (forks in IAVL) in our chain. * Cosmos SDK v0.45.10 @@ -6,7 +17,6 @@ We've developed a new version with some updates (regarding SDK, Tendermint & IBC * IAVL v0.19.4 * IBC/go v3.3.1 * Ledger-go v0.9.3 (now support Ledger Nano Plus) -* Source code refactored to deprecate `CosmosCMD` package from Ignite/CLI > Note: this is not a planned upgrade, chain won't be halted