Skip to content

Latest commit

 

History

History
369 lines (296 loc) · 13.8 KB

README.md

File metadata and controls

369 lines (296 loc) · 13.8 KB
Raw

Flow Local Instrumented Test Environment (FLITE)

FLITE is a tool for running a full version of the Flow blockchain.

Table of Contents

Bootstrapping

Before running the Flow network it is necessary to run a bootstrapping process. This generates keys for each of the nodes and a genesis block to build on.

Bootstrap a new network:

make bootstrap

Configuration

Various properties of the local network can be configured when it is initialized. All configuration is optional.

Specify the number of nodes for each role:

make -e COLLECTION=2 CONSENSUS=5 EXECUTION=3 VERIFICATION=2 ACCESS=2 bootstrap

NOTE: number of execution\consensus nodes should be no less than 2. It is to avoid seals being created in case of execution forks.

Specify the number of collector clusters:

make -e NCLUSTERS=3 bootstrap

Profiling

You can turn on automatic profiling for all nodes. Profiles are written every 2 minutes to ./profiler.

make -e PROFILER=true bootstrap

Start the network

This command will automatically build new Docker images from your latest code changes and then start the test network:

make start

Alternatively, this command will start the test network without re-building, using the most recently built image.

make start-cached

Stop the network

The network needs to be stopped between each consecutive run to clear the chain state:

make stop

Build Localnet images

To build images for Localnet, run this command.

make build-flow

Logs

You can view log output from all nodes:

make logs

Observabilitty

You can view realtime metrics, logs, and traces while the network is running:

Metrics

Metrics are available through the Prometheus backend.

Following dashboards are preinstalled:

Here's an example of a Prometheus query that filters by the consensus role:

avg(rate(consensus_compliance_finalized_blocks_total{role="consensus"}[$__interval]))

Traces

Traces are available through the Tempo backend. You can to traces either by searching for logs that have a traceID label, clicking on them and pressing "Open in Tempo" button:

{role="execution"} | json | __error__ != "JSONParserErr" | timeSpentInMS > 10 | traceID != ""

Or by using the grafana's Search feature in explore:

Logs

Logs are available through the Loki backend. You can use them either through the Logs/TimeSeries panels or through the explore:

Benchmarking

Localnet can be loaded easily as well

make load

The command by default will load your localnet with 1 tps for 30s, then 10 tps for 30s, and finally 100 tps indefinitely.

More about the loader can be found in the benchmark module.

Debugging

It is possible to connect a debugger to a localnet instance to debug the code. To set this up, find the node you want to debug in docker-compose.nodes.yml, then make the following changes to its config:

  1. Set the build target setting to debug. This configures it to use the special debug image which runs the node application within dlv. 
    build:
	...
	target: debug
  2. Expose the debugger ports to your host network 
    ports:
	...
	- "2345:2345"
  3. Rebuild the node. In these examples, we are rebuilding the execution_1 node. 
    docker-compose -f docker-compose.nodes.yml build execution_1
  4. Stop and restart the node 
    docker-compose -f docker-compose.nodes.yml stop execution_1
docker-compose -f docker-compose.nodes.yml up -d execution_1
  5. Check the logs to make sure it's working 
    docker-compose -f docker-compose.nodes.yml logs -f execution_1

localnet-execution_1-1  | API server listening at: [::]:2345
  6. Configure your debugger client to connect. Here is a vscode launch config as an example: 
    {
    "name": "Connect to container",
    "type": "go",
    "request": "attach",
    "mode": "remote",
    "debugAdapter": "dlv-dap",
    "substitutePath": [
        {
            "from": "${workspaceFolder}",
            "to": "/app",
        },
    ],
    "port": 2345,
    "trace": "verbose"
},

Notes:

  • JSON-rpc only supports connecting to the headless server once. You will need to restart the node to connect again. Debug Adaptor Protocol (DAP) supports reconnecting.
  • The Dockerfile is configured to pause the application until the debugger connects. This ensures JSON-rpc clients can connect. If you are connecting with DAP and would like the node to start immediately, update the debug ENTRYPOINT in the Dockerfile to include --continue=true.

Playing with Localnet

This section documents how can be localnet used for experimenting with the network.

Configure Flow CLI to work with localnet

Follow documentation to install and initialize the Flow CLI.

Add localnet network

Modify Flow CLI configuration file and add "localnet" network, using access node address/port with values displayed by the localnet initialization step. An example of the Flow CLI configuration modified for connecting to the localnet:

{
	"networks": {
		"localnet": "127.0.0.1:3569"
	}
}

You can test the connection to the localnet by for example querying service account address:

flow -n localnet accounts get f8d6e0586b0a20c7

Add service account address and private key

The service account private key is hardcoded for localnet and can be found in unit test utility execution state.

The service account address is derived from network ID (in this case "flow-localnet") and the generated service account address is "f8d6e0586b0a20c7".

Note: you can also get the address via Chain interface ServiceAddress() method.

Create new entry in the Flow CLI config "accounts" section for the localnet service account and add the service account address and private key using the advanced format.

An example of the Flow CLI configuration with the service account added:

{
	"networks": {
		"localnet": "127.0.0.1:3569"
	},
	"accounts": {
		"localnet-service-account": {
			"address": "f8d6e0586b0a20c7",
			"key":{
				"type": "hex",
        "index": 0,
        "signatureAlgorithm": "ECDSA_P256",
        "hashAlgorithm": "SHA2_256",
        "privateKey": "8ae3d0461cfed6d6f49bfc25fa899351c39d1bd21fdba8c87595b6c49bb4cc43"
			}
		}
	}
}

to check if the address above really is a service account, query the service account address:

flow -n localnet accounts get f8d6e0586b0a20c7

and check that the output contains Contract: 'FlowServiceAccount'.

Configure contract addresses for localnet

When you send transaction via CLI, the cadence contract you provide to the CLI will likely need to reference other contracts deployed on the network. You can configure the CLI to substitute the contract addresses on different networks. For example, to run this contract, you will need to import FungibleToken and FlowToken.

Add this block to your Flow CLI configuration file "contracts" section:

"FungibleToken": {
	"source": "cadence/contracts/FungibleToken.cdc",
	"aliases": {
		"localnet": "0xee82856bf20e2aa6",
		"emulator": "0xee82856bf20e2aa6",
		"testnet": "0x9a0766d93b6608b7"
	}
},
"FlowToken": {
	"source": "cadence/contracts/FlowToken.cdc",
	"aliases": {
		"localnet": "0x0ae53cb6e3f42a79",
		"emulator": "0x0ae53cb6e3f42a79",
		"testnet": "0x7e60df042a9c0868"
	}
}

Note: The actual address values can also be found in Flow Documentation for Fungible Token Contract and Flow Token Contract.

Using Flow CLI to send transaction to localnet

Creating new account on the localnet

Create keys for a new account:

flow keys generate -n localnet

Use the generated public key in the following command:

flow accounts create --key <GENERATED_PUBLIC_KEY> --signer localnet-service-account -n localnet

After the transaction is sealed the command should print the account address and balance.

Getting account information

To verify that the account created in the previous section exists, or to check the balance etc. you can run:

flow -n localnet accounts get <ACCOUNT_ADDRESS>

Running a cadence script

This script below reads the balance field of an account's FlowToken Balance. Create a file (for example my_script.cdc) containing following cadence code:

import FungibleToken from 0xee82856bf20e2aa6
import FlowToken from 0x0ae53cb6e3f42a79

pub fun main(address: Address): UFix64 {
	let acct = getAccount(address)
	let vaultRef = acct.getCapability(/public/flowTokenBalance)!.borrow<&FlowToken.Vault{FungibleToken.Balance}>()
		?? panic("Could not borrow Balance reference to the Vault")
	return vaultRef.balance
}

Run the script:

flow scripts execute -n localnet ~/my_script.cdc "<ACCOUNT_ADDRESS>"

replace <ACCOUNT_ADDRESS> in the command above with an address that you created on your localnet.

The script should output the account balance of the specified account.

You can also execute simple script without creating files, by providing the script in the command, for example:

# flow scripts execute -n localnet <(echo """
pub fun main(address: Address): UFix64 {
    return getAccount(address).balance
}
""") "<ACCOUNT_ADDRESS>"

Moving tokens from the service account to another account

Create new cadence contract file from this template. Make sure that contract imports have values that match your cli config, following the CLI configuration chapter above it should look like:

import FungibleToken from "cadence/contracts/FungibleToken.cdc"
import FlowToken from "cadence/contracts/FlowToken.cdc"

Send the transaction with this contract to localnet:

flow transactions send transfer_tokens.cdc 9999.9 <ACCOUNT_ADDRESS> -n localnet --signer localnet-service-account

replace <ACCOUNT_ADDRESS> in the command above with an address that you created on your localnet.

After the transaction is sealed, the account with <ACCOUNT_ADDRESS> should have the balance increased by 9999.9 tokens.

admin tool

The admin tool is enabled by default in localnet for all node type except access node.

For instance, in order to use admin tool to change log level, first find the local port that maps to 9002 which is the admin tool address, if the local port is 3702, then run:

curl localhost:3702/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "set-log-level", "data": "debug"}'

To find the local port after launching the localnet, run docker ps -a, and find the port mapping. For instance, the following result of docker ps -a shows localnet-collection maps 9002 port to localhost's 3702 port, so we could use 3702 port to connect to admin tool.

2e0621f7e592   localnet-access                   "/bin/app --nodeid=9…"   9 seconds ago    Up 8 seconds              0.0.0.0:3571->9000/tcp, :::3571->9000/tcp, 0.0.0.0:3572->9001/tcp, :::3572->9001/tcp                                                           localnet_access_2_1
fcd92116f902   localnet-collection               "/bin/app --nodeid=0…"   9 seconds ago    Up 8 seconds              0.0.0.0:3702->9002/tcp, :::3702->9002/tcp                                                                                                      localnet_collection_1_1
dd841d389e36   localnet-access                   "/bin/app --nodeid=a…"   10 seconds ago   Up 9 seconds              0.0.0.0:3569->9000/tcp, :::3569->9000/tcp, 0.0.0.0:3570->9001/tcp, :::3570->9001/tcp                                                           localnet_access_1_1