Issue with Power Adjustment of Wind Module

[amparocorvalan]

Dear @cuihantao,

I have found your answers very helpful in discussion #534. When performing the setpoint change for a solar PV model it works very well. However, when applying this to the WT3 model the adjustment to real power does not exhibit the desired behavior. In this case, that the renewable generator is more complex, do you know what parameter or service should I modify to achieve the change in the power injected by the wind turbine?

For example in a simple model that I am using as a “base case” (4 busbars, one with one GS, one with 5 solar PV, one with 5 WT and one with load) when I change the injected power for the solar generators, it gives the expected result. However, for the case of wind turbines it does not.

Here REGCA1 1 is one of the solar PV and REGCA1 6 is one of the WT.

I would appreciate very much if you can help me solve this.

Best regards,
Amparo