From 24c785bdd7613f19e7fa26bab0d6dfb399b74ddd Mon Sep 17 00:00:00 2001 From: Henry Gabryjelski Date: Tue, 24 Sep 2024 16:50:52 -0700 Subject: [PATCH] Remove unused key/value pairs Note that the generated `.h` files are unchanged, confirming non-use. --- translation/bs-ba.json | 10 ---------- translation/pl-pl.json | 10 ---------- translation/zh-cn.json | 10 ---------- 3 files changed, 30 deletions(-) diff --git a/translation/bs-ba.json b/translation/bs-ba.json index 2fd12d7b..d5cf19ed 100644 --- a/translation/bs-ba.json +++ b/translation/bs-ba.json @@ -170,14 +170,12 @@ "T_HELP_1_6": "Odloži 1 us/MS (d:4 za ponavljanje)", "T_HELP_1_7": "Postavi IO.x stanje (low/HI/READ)", "T_HELP_COMMAND_AUX": "Postavi IO x stanje (low/HI/READ)", - "T_HELP_1_8": "-\\t\\t\\t", "T_HELP_1_9": "Konfiguracijski izbornik\\t", "T_HELP_1_22": "Prikaži napon na IOx (jednom/CONT)", "T_HELP_1_10": "Prikaži napon na svim IO (jednom/CONT)", "T_HELP_1_11": "Izmjeri frekvenciju na IOx (jednom/CONT)", "T_HELP_1_23": "Prati frekvenciju (off/ON)\\t", "T_HELP_1_12": "Generiši frekvenciju (off/ON)", - "T_HELP_1_13": "Pomoć (opšta/PROTOKOL)\\t", "T_HELP_1_14": "Versioninfo/statusinfo\\t", "T_HELP_1_15": "Bitorder (msb/LSB)\\t", "T_HELP_1_16": "Promjeni mod\\t\\t", @@ -189,19 +187,11 @@ "T_HELP_2_1": "Makro mod x/prikaži sve\\t", "T_HELP_2_3": "Start", "T_HELP_2_4": "Stop", - "T_HELP_2_5": "Start čitanje", - "T_HELP_2_6": "Stop", "T_HELP_2_7": "Pošalji string", "T_HELP_2_8": "", "T_HELP_2_9": "", "T_HELP_2_10": "Pošalji vrijednost", "T_HELP_2_11": "Čitaj", - "T_HELP_2_12": "CLK hi", - "T_HELP_2_13": "CLK lo", - "T_HELP_2_14": "CLK tick", - "T_HELP_2_15": "DAT hi", - "T_HELP_2_16": "DAT lo", - "T_HELP_2_17": "DAT read", "T_HELP_2_18": "Čitaj bit", "T_HELP_2_19": "Ponovi npr. r:10", "T_HELP_2_20": "Pročitaj/zapiši bita npr. 0x55.2", diff --git a/translation/pl-pl.json b/translation/pl-pl.json index 7113458c..57f1f4b1 100644 --- a/translation/pl-pl.json +++ b/translation/pl-pl.json @@ -170,14 +170,12 @@ "T_HELP_1_6": "Opóźnij 1 us/MS (d:4 aby powtórzyć)", "T_HELP_1_7": "Ustaw stan pinu IO.x (low/HI/READ)", "T_HELP_COMMAND_AUX": "Ustaw stan pinu IO x (low/HI/READ)", - "T_HELP_1_8": "-\\t\\t\\t", "T_HELP_1_9": "Menu konfiguracyjne\\t", "T_HELP_1_22": "Pokaż wolty na pinie IOx (jednorazowo/CIĄGLE)", "T_HELP_1_10": "Pokaż wolty na wszystkich pinach IOs (jednorazowo/CIĄGLE)", "T_HELP_1_11": "Zmierz częstotliwość na pinie IOx (jednorazowo/CIĄGLE)", "T_HELP_1_23": "Monitoruj częstotliwość (wył./WŁ.)\\t", "T_HELP_1_12": "Generuj częstotliwość (wył./WŁ.)", - "T_HELP_1_13": "Pomoc (ogólna/PROTOKOŁU)\\t", "T_HELP_1_14": "Wersja/Status\\t", "T_HELP_1_15": "Kolejność bitów (msb/LSB)\\t", "T_HELP_1_16": "Zmień tryb\\t\\t", @@ -189,19 +187,11 @@ "T_HELP_2_1": "Mode macro x/list all\\t", "T_HELP_2_3": "Uruchom", "T_HELP_2_4": "Zatrzymaj", - "T_HELP_2_5": "Uruchom z odczytem", - "T_HELP_2_6": "Zatrzymaj", "T_HELP_2_7": "Wyślij stringa", "T_HELP_2_8": "", "T_HELP_2_9": "", "T_HELP_2_10": "Wyślij wartość", "T_HELP_2_11": "Przeczytaj", - "T_HELP_2_12": "CLK hi", - "T_HELP_2_13": "CLK lo", - "T_HELP_2_14": "CLK tick", - "T_HELP_2_15": "DAT hi", - "T_HELP_2_16": "DAT lo", - "T_HELP_2_17": "DAT przeczytany", "T_HELP_2_18": "Bit przeczytany", "T_HELP_2_19": "Powtórz np. r:10", "T_HELP_2_20": "Ilość bitów do zapisu/odczytu np. 0x55.2", diff --git a/translation/zh-cn.json b/translation/zh-cn.json index 0ca98db0..c1368cf4 100644 --- a/translation/zh-cn.json +++ b/translation/zh-cn.json @@ -75,14 +75,12 @@ "T_HELP_1_5": "切换到系统启动加载器\\t", "T_HELP_1_6": "Delay 1 us/ms\\t\\t", "T_HELP_1_7": "AUXPIN (low/HI/READ)\\t", - "T_HELP_1_8": "-\\t\\t\\t", "T_HELP_1_9": "AUX assignment (aux/CS)\\t", "T_HELP_1_22": "Show volts on IOx (once/CONT)", "T_HELP_1_10": "Show volts all IOs (once/CONT)", "T_HELP_1_11": "Measure freq on IOx (once/CONT)", "T_HELP_1_23": "Monitor freq (off/ON)\\t", "T_HELP_1_12": "生成频率（关/开）", - "T_HELP_1_13": "Help (general/PROTOCOL)\\t", "T_HELP_1_14": "版本详情/statusinfo\\t", "T_HELP_1_15": "Bitorder (msb/LSB)\\t", "T_HELP_1_16": "切换模式\\t\\t", @@ -94,19 +92,11 @@ "T_HELP_2_1": "Mode macro x/list all", "T_HELP_2_3": "Start", "T_HELP_2_4": "Stop", - "T_HELP_2_5": "Start with read", - "T_HELP_2_6": "Stop", "T_HELP_2_7": "Send string", "T_HELP_2_8": "", "T_HELP_2_9": "", "T_HELP_2_10": "Send value", "T_HELP_2_11": "Read", - "T_HELP_2_12": "CLK hi", - "T_HELP_2_13": "CLK lo", - "T_HELP_2_14": "CLK tick", - "T_HELP_2_15": "DAT hi", - "T_HELP_2_16": "DAT lo", - "T_HELP_2_17": "DAT read", "T_HELP_2_18": "Bit read", "T_HELP_2_19": "Repeat e.g. r:10", "T_HELP_2_20": "Bits to read/write e.g. 0x55.2",