Pololu Pin Issue?

[markwomack]

BaseStation/DCCpp_Uno/DCCpp_Uno.h

Line 77 in 3c90408

#define SIGNAL_ENABLE_PIN_PROG 11

I was looking at the pinouts for the Pololu MC33926, and shouldn't the PWM for motor 2 be mapped to pin 10 instead of pin 11? See the link to the diagram below:

https://www.pololu.com/product/2503#lightbox-picture0J4009

Not sure what that does to the pin 10 defined in the Uno definition section of this file.

I am just starting to look at things, trying to understand, so I apologize if there is something obvious here that I missed.