switch.py

#!/usr/bin/env python
import RPi.GPIO as GPIO

TouchPin = 12
Gpin   = 11
Rpin   = 40 

tmp = 0

def setup():
	GPIO.setmode(GPIO.BOARD)       # Numbers GPIOs by physical location
	GPIO.setup(Gpin, GPIO.OUT)     # Set Green Led Pin mode to output
	GPIO.setup(Rpin, GPIO.OUT)     # Set Red Led Pin mode to output
	GPIO.setup(TouchPin, GPIO.IN, pull_up_down=GPIO.PUD_UP)    # Set BtnPin's mode is input, and pull up to high level(3.3V)

def Led(x):
	if x == 0:
		GPIO.output(Rpin, 1)
		GPIO.output(Gpin, 0)
	if x == 1:
		GPIO.output(Rpin, 0)
		GPIO.output(Gpin, 1)
	

def Print(x):
	global tmp
	if x != tmp:
		if x == 0:
			print '    **********'
			print '    *     ON *'
			print '    **********'
	
		if x == 1:
			print '    **********'
			print '    * OFF    *'
			print '    **********'
		tmp = x

def loop():
	while True:
		Led(GPIO.input(TouchPin))
		Print(GPIO.input(TouchPin))

def destroy():
	GPIO.output(Gpin, GPIO.HIGH)       # Green led off
	GPIO.output(Rpin, GPIO.HIGH)       # Red led off
	GPIO.cleanup()                     # Release resource

if __name__ == '__main__':     # Program start from here
	setup()
	try:
		loop()
	except KeyboardInterrupt:  # When 'Ctrl+C' is pressed, the child program destroy() will be  executed.
		destroy()