Make sure you have node
installed and run this simulator with the following command in the terminal:
node . false SI 26.6667 50 0 20 1.01325e5
Arguments:
- [boolean] Verbose logs at the console
- [string] Unit System (SI)
- [number] Ambient temperature (°C)
- [number] Relative humidity (0-100%)
- [number] O2 excess (0-30%) // if greater than possible or equal to 0, Air excess is used.
- [number] Air excess (0-1000%) // overshadowed by O2 excess
- [number] Ambient pressure (Pa)
To update the data used in the simulator from the .csv table, run the following command:
npm run data
To update the files used by the web version of the app, run the following command:
npm start
{ "INFO": "Adiabatic flame temp: [2,111.555 K] 1,838.4 °C"}
{ "INFO": "duty_rad_dist: 62.40, ext_cycle_reps: 15"}
{ "DEFAULT": "RADI, T_in_calc: 378.5 °C, M_fuel: 2,073.530 kg/h, Tg_out: 799.0 °C"}
{ "DEFAULT": "SHLD, cycles: 8, T_in_calc: 370.1 °C, Tg_out: 694.3 °C"}
{ "DEFAULT": "CONV, T_in_calc: 358.9 °C, T_in_given: 358.9 °C, Tg_stack: 390.4 °C"}
{ "INFO": {
"flows": {
"total_flow": 21.814,
"dry_total_flow": 19.272,
"N2_%": 73.705,
"H2O_%": 11.652,
"CO2_%": 5.966,
"O2_%": 8.678,
"O2_mol_req_theor": 2.366,
"O2_mass_req_theor": "0.076 kg",
"air_excess_%": 80,
"AC": 20.685,
"AC_theor_dryAir": 11.295,
"AC_mass": 28.034,
"AC_mass_theor_moistAir": 15.574,
"fuel_MW": "21.149 kg/kmol",
"fuel_Cp": "42.409 kJ/kmol-K",
"flue_MW": "28.149 kg/kmol",
"flue_Cp_Tamb": "30.197 kJ/kmol-K",
"NCV": "966864.235 kJ/mol"
...
},
"products": {
"O2": 1.893,
"H2O": 2.542,
"CO2": 1.301,
"SO2": 0,
"N2": 16.078
},
"debug_data": {
"atmPressure": "101.325 kPa",
"ambTemperature": "26.667 °C",
"humidity_%": 50,
"dryAirN2_%": 79.05,
"dryAirO2_%": 20.95,
"dryAirPressure": "99.589 kPa",
"waterPressure": "1.736 kPa",
"H2OPressure_%": 1.714,
"N2Pressure_%": 77.695,
"O2Pressure_%": 20.591,
"unitSystem": "SI"
},
"rad_result": {...},
"shld_result": {...},
"conv_result": {...}
}}
20% exceso de aire 50% humedad
Moles de gas total y porcentajes por cada mol de combustible:
"total_flow": 14.919,
"dry_total_flow": 12.496,
"N2_%": 71.86,
"H2O_%": 16.245,
"CO2_%": 8.723,
"O2_%": 3.172,
"O2_mol_req_theor": 2.366,
"O2_mass_req_theor": "0.076 kg",
"air_excess_%": 20,
"AC": 13.79,
"AC_mass": 18.689,
"AC_mass_theor": 15.574,
"fuel_MW": "21.149 kg/kmol",
"fuel_Cp": "42.409 kJ/kmol-K",
"flue_MW": "27.911 kg/kmol",
"flue_Cp_Tamb": "30.613 kJ/kmol-K",
"NCV": "966864.235 kJ/mol"
Moles de gases de combustion por cada mol de combustible
"O2": 0.473,
"H2O": 2.424,
"CO2": 1.301,
"SO2": 0,
"N2": 10.721
Datos de entrada
"atmPressure": "101.325 kPa",
"ambTemperature": "26.667 °C",
"humidity_%": 50,
"dryAirN2_%": 79.05,
"dryAirO2_%": 20.95,
"dryAirPressure": "99.589 kPa",
"waterPressure": "1.736 kPa",
"H2OPressure_%": 1.714,
"N2Pressure_%": 77.695,
"O2Pressure_%": 20.591,
"unitSystem": "SI"