Add APLI brand label templates

[Vero-CUNEF-Library]

Hello!
I would like to ask if it would be possible to add the APLI sticker templates, as when creating them in the app, it does not have enough parameters to put the measurements. Specifically, it would be the following stickers, of which there are templates on the brand's website:

• APLI Ref. 01285 48,5x25,4 mm
• APLI Ref. 01273 70x37 mm

Thank you!
wp_01273.pdf
wp_01285.pdf

[mgobat]

@Vero-CUNEF-Library, what settings have you tried in the label layout? Which measurements are you unable to set in the layout? Thank you.

[mgobat]

@Vero-CUNEF-Library, how close do you get with these settings?

01273:
Measurement units: inches
Top margin: 0
Left margin: 0
Page width: 8.27
Orientation: Portrait
Label width: 2.756
Label height: 1.46
Horizontal gap: 0
Vertical gap: 0
Labels per page: 24
Left padding: 0

01285:
Measurement units: inches
Top margin: .33
Left margin: .32
Page width: 8.27
Orientation: Portrait
Label width: 1.91
Label height: 1
Horizontal gap: 0
Vertical gap: 0
Labels per page: 44
Left padding: 0

[Vero-CUNEF-Library]

@mgobat
I have different measurements, I'm going to try with the ones you have given me, and I'll let you know how the labels turn out, but I use centimetres. Here are my two layouts for you.
When I use the layouts you gave me, when I print I don't see the shingle, I see the word Translator.
01285:
Measurement units: centimeters
Top margin: 0
Left margin: 0
Page width: 21
Orientation: portrait
Label width: 5.2
Label height: 2.8
Horizontal gap: 0
Vertical gap: 0
Labels per page: 44
Left padding: 0

01273:
Measurement units: centimeters
Top margin: 1
Left margin: 0
Page width: 21
Orientation: portrait
Label width: 7
Label height: 3.8
Horizontal gap: 0
Vertical gap: 0
Labels per page: 24
Left padding

Thank you very much,

[mgobat]

@Vero-CUNEF-Library, I'm sorry...I don't understand this part of your last message:
"when I print I don't see the shingle, I see the word Translator.". Is the shingle something that is part of your "Template"?

Thank you.

[mgobat]

@Vero-CUNEF-Library, just to confirm. You are working with the SpineOMatic Cloud App rather than the SpineOMatic Windows App, correct?

[Vero-CUNEF-Library]

Hello,
I have already solved the first issue, there was a change in the template.
Regarding the second question, I use the app from Alma, I am working with the SpineOMatic Cloud App.
Thank you.

[mgobat]

@Vero-CUNEF-Library, I'm going to move this issue to the SpineOMatic Cloud App repository.

[mgobat]

@Vero-CUNEF-Library, so which issue is still outstanding for you? Thank you.

[Vero-CUNEF-Library]

Basically, my problem is when I create a Layouts of stickers from the Apli brand, in Spineomatic, using CM, I cannot adjust it, and when I print several pages, it starts to move out of place, in addition, in order for it to be adjusted better I have to modify the settings of the printer.
My question was if you could create the layouts, like the default ones. Below, I detail the measurements that I have created for the two models of stickers.
01285:
Measurement units: centimeters
Top margin: 0
Left margin: 0
Page width: 21
Orientation: portrait
Label width: 5.2
Label height: 2.8
Horizontal gap: 0
Vertical gap: 0
Labels per page: 44
Left padding: 0

01273:
Measurement units: centimeters
Top margin: 1
Left margin: 0
Page width: 21
Orientation: portrait
Label width: 7
Label height: 3.8
Horizontal gap: 0
Vertical gap: 0
Labels per page: 24
Left padding: 0

Thank you,

[mgobat]

@Vero-CUNEF-Library, so you'd like these settings to be an out-of-the-box layout that you can pick from the "Layout based on" dropdown when you Add a new layout? These settings work without tweaking for you? If we add them as an option in the "Layout based on" dropdown, it does not guarantee tweaking for your particular printer won't be required. Thanks...

[Vero-CUNEF-Library]

It would be of great help if you could add the "Layout based on" of the labels that we need to generate the signature, even if we have to modify the printing settings, which we currently have to do as well. Next, I am giving you the pdf of the measurements of the two Apli templates that we used, and with which I tried to create the layouts, in case it helps you.
If it were too much trouble to create the layouts, nothing would happen because we could continue with the ones I had already created.
Apli 01273_measurements in cm.pdf
Apli 01285_measurements in cm.pdf
Thank you,

[mgobat]

@Vero-CUNEF-Library, we have changed this to an enhancement request as adding predefined layouts requires code changes.

[Vero-CUNEF-Library]

@mgobat, Ok, thanks for everything!

[mgobat]

New APLI layouts available in the v1.3.7-beta version. To try the beta, click the "i" (information) icon on the SpineOMatic tile in the "Cloud App Center" in Alma, then click the "Try v1.3.7-beta" link.

Please add feedback/comments to this issue. Thank you.

[Vero-CUNEF-Library]

Hello,
I have tested the labels in the beta, but I still have the problem that when I want to print several shingles at the same time, they get out of place and do not come out square on the layout.
Best regards.