Skip to content

PACS Pull wokflow

Jump to bottom
Nicolas Rannou edited this page Jan 23, 2017 · 24 revisions 
- <Important Note>
- Requires the #plugin_pacsquery branch (pending issue to be fixed on #master)
- This tutorial is for OSX and might vary on other platforms.

Setup the DICOM server

 51   // Enable the HTTP server. If this parameter is set to "false",
 52   // Orthanc acts as a pure DICOM server. The REST API and Orthanc
 53   // Explorer will not be available.
 54   "HttpServerEnabled" : true,
 55 
 56   // HTTP port for the REST services and for the GUI
 57   "HttpPort" : 8042,
...
  • Config DICOM server:
...
 76   // Enable the DICOM server. If this parameter is set to "false",
 77   // Orthanc acts as a pure REST server. It will not be possible to
 78   // receive files or to do query/retrieve through the DICOM protocol.
 79   "DicomServerEnabled" : true,
 80 
 81   // The DICOM Application Entity Title
 82   "DicomAet" : "ORTHANC",
 83 
 84   // Check whether the called AET corresponds during a DICOM request
 85   "DicomCheckCalledAet" : false,
 86 
 87   // The DICOM port
 88   "DicomPort" : 4242,
...
  • Config network topology:
...
140   // The list of the known DICOM modalities
141   "DicomModalities" : {
142     /**
143      * Uncommenting the following line would enable Orthanc to
144      * connect to an instance of the "storescp" open-source DICOM
145      * store (shipped in the DCMTK distribution) started by the
146      * command line "storescp 2000".
147      **/
148      "chrisultron" : [ "CHRIS-ULTRON-AET", "localhost", 2000 ],
149      "chrisultronlistener" : [ "CHRIS-ULTRON-LIS", "localhost", 10401 ]
...

Start Orthanc instance and upload data through HTTP Server

  • Start Orthanc: ~/work/orthancAndPluginsOSX.stable$ ./startOrthanc.command

Then go to: http://localhost:8042/app/explorer.html and add some DICOM data into the Orthanc instance.

  • Test with PyPX: px-echo 
{'data': '', 'command': '/usr/local/bin/echoscu --timeout 5  -aec CHRIS-ULTRON-AEC -aet CHRIS-ULTRON-AET 192.168.1.110 4242', 'status': 'success'}`
  • Test with DCMTK: `echoscu localhost 4242
<empty response>

Setup the DICOM listener

  • Install DCMTK: http://dicom.offis.de/dcmtk.php.en
  • Install PyPx: https://pypi.python.org/pypi/pypx
  • Add service: /$ vim /etc/services 
13922 chris-ultron    10401/tcp   # chris ultron dicom listener
13923 chris-ultron    10401/udp   # chris ultron dicom listener
13924 #                           Nicolas Rannou <nicolas@eunate.ch>
  • Configure the DAEMON: (OSX): /$ vim /Library/LaunchDaemons/org.babymri.chris-ultron.plist 
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>UserName</key>
    <string>nico</string>
    <key>Label</key>
    <string>org.babymri.chris-ultron</string>
    <key>ProgramArguments</key>
    <array>
        <string>/Library/Frameworks/Python.framework/Versions/3.5/bin/python3</string>
        <string>/Library/Frameworks/Python.framework/Versions/3.5/bin/ptk-listen</string>
    	<string>-t</string>
    	<string>/tmp</string>
    	<string>-l</string>
    	<string>/tmp/log</string>
    	<string>-d</string>
    	<string>/tmp/data</string>
    </array>
    <key>inetdCompatibility</key>
    <dict>
        <key>Wait</key>
        <false/>
    </dict>
    <key>Sockets</key>
    <dict>
        <key>Listeners</key>
        <dict>
            <key>SockServiceName</key>
            <string>chris-ultron</string>
            <key>SockType</key>
            <string>stream</string>
        </dict>
    </dict>
</dict>
</plist>
  • Load Daemon: sudo launchctl load -w org.babymri.chris-ultron.plist

(Unload: sudo launchctl unload org.babymri.chris-ultron.plist)

  • Test Daemon: nc localhost 10401 (must hang)

Using the plugins

Right now using branch ... because one issue has to be resolved on the #master branch.

Clone this wiki locally