Options

Info

--info                    Show information and most importand power metrics after adjustment

Dump Power Metrics Table

--dump-table              Show whole power metric table before and after adjustment

STAPM

--stapm-limit=<u32>       Sustained Power Limit         - STAPM LIMIT (mW)
--stapm-time=<u32>        STAPM constant time (s)

Gets overwritten by SSTv2. Only usable if you did disable SSTv2 (Zen2/Zen3) or if you don't have it (Zen or Zen+)

SSTv2

--apu-skin-temp=<u32>    APU Skin Temperature Limit    - STT LIMIT APU (degree C)
--dgpu-skin-temp=<u32>   dGPU Skin Temperature Limit   - STT LIMIT dGPU (degree C)
--skin-temp-limit=<u32>  Skin Temperature Power Limit (mW)

STT does overwrite STAPM Limit with FAST Limit or if STT detects over-temperature the STT power value (--skin-temp-limit) gets applied on STAPM.

PPT Limit

--fast-limit=<u32>        Actual Power Limit            - PPT LIMIT FAST (mW)
--slow-limit=<u32>        Average Power Limit           - PPT LIMIT SLOW (mW)
--slow-time=<u32>         Slow PPT Constant Time (s)

• PPT VALUE SLOW (average power draw) gets controlled by SlowPPTTimeConstant(--slow-time)
• PPT VALUE FAST is the current power draw

TCTL Temp

--tctl-temp=<u32>         Tctl Temperature Limit (degree C)

Here is an example why the --tctl-temp=100 is not checked/enforced fast enough and why you need to set it 5-10°C lower than your prochot limit:

TDC Limit

--vrm-current=<u32>       VRM Current Limit             - TDC LIMIT VDD (mA)
--vrmsoc-current=<u32>    VRM SoC Current Limit         - TDC LIMIT SoC (mA)

EDC Limit

--vrmmax-current=<u32>    VRM Maximum Current Limit     - EDC LIMIT VDD (mA)
--vrmsocmax-current=<u32> VRM SoC Maximum Current Limit - EDC LIMIT SoC (mA)

PSI0

--psi0-current=<u32>      PSI0 VDD Current Limit (mA)
--psi0soc-current=<u32>   PSI0 SoC Current Limit (mA)

Frequency

--max-socclk-frequency=<u32>  Maximum SoC Clock Frequency (MHz)
--min-socclk-frequency=<u32>  Minimum SoC Clock Frequency (MHz)
--max-fclk-frequency=<u32>    Maximum Transmission (CPU-GPU) Frequency (MHz)
--min-fclk-frequency=<u32>    Minimum Transmission (CPU-GPU) Frequency (MHz)
--max-vcn=<u32>               Maximum Video Core Next (VCE - Video Coding Engine) (MHz)
--min-vcn=<u32>               Minimum Video Core Next (VCE - Video Coding Engine) (MHz)
--max-lclk=<u32>              Maximum Data Launch Clock (MHz)
--min-lclk=<u32>              Minimum Data Launch Clock (MHz)
--max-gfxclk=<u32>            Maximum GFX Clock (MHz)
--min-gfxclk=<u32>            Minimum GFX Clock (MHz)

Prochot

--prochot-deassertion-ramp=<u32> Ramp Time After Prochot is Deasserted: 
                                 limit power based on value, higher values does apply tighter limits after prochot is over

Prochot is a safety feature which kicks in to prevent damage. It does limit your CPU to the lowest posible power state.

PPT APU

--apu-slow-limit=<u32>  APU PPT Slow Power limit for A+A dGPU platform - PPT LIMIT APU (mW)

AC-Mode / DC Mode

--power-saving     Hidden options to improve power efficiency (is set when AC unplugged): behavior depends on CPU generation, Device and Manufacture
--max-performance  Hidden options to improve performance (is set when AC plugged in): behavior depends on CPU generation, Device and Manufacture