Skip to content

Latest commit

 

History

History
150 lines (101 loc) · 4.82 KB

Fedora40-amd-fw13.md

File metadata and controls

150 lines (101 loc) · 4.82 KB
Raw

This is for AMD Ryzen 7040 Series configuration on the Framework Laptop 13 ONLY.

This will:

  • Getting your laptop fully updated.
  • Enable improved fractional scaling support Fedora's GNOME environment using Wayland.
  • Enabling tap to click on the touchpad.

     

Step 1 Updating your software packages

  • Browse to the horizontal line in the upper left corner, click to open it.
  • Type out the word terminal, click to open it.
  • Copy the code below in the gray box, right click/paste it into the terminal window.
  • Then press the enter key, user password, enter key, reboot.
sudo dnf upgrade

TIP: You can use the little clipboard icon to the right of the code to copy to your clipboard.

Reboot

     

Step 2 - If you want to enable fractional scaling on Wayland:

  • Browse to the horizontal line in the upper left corner, click to open it.
  • Type out the word terminal, click to open it.
  • Left click and drag to highlight and copy the code below in the gray box, right click/paste it into the terminal window.
  • Then press the enter key.
  • Browse to the horizontal line in the upper left corner, click to open it.
  • Type out the word Displays.
  • Look for "Scale", set it to your preference, click Apply.
gsettings set org.gnome.mutter experimental-features "['scale-monitor-framebuffer']"

TIP: You can use the little clipboard icon to the right of the code to copy to your clipboard.

     

Step 3 - If you want to enable "tap-to-click" on the touchpad:

  • Browse to the horizontal line in the upper left corner, click to open it.
  • Type out the word mouse, look for Mouse and Touchpad, click to open it.
  • Click the touchpad option at the top.
  • Under "Clicking", select Tap to Click and enable it.

     

Optional and only if needed - current AMD Ryzen 7040 Series workarounds to common issues

To prevent graphical artifacts from appearing:

(Note, this workaround may be unneeded as it is difficult to reproduce, however, if you find you're experiencing the issue described here, you can implement this boot parameter)

  • Browse to the horizontal line in the upper left corner, click to open it.
  • Type out the word terminal, click to open it.
  • Then press the enter key, user password, enter key.
sudo grubby --update-kernel=ALL --args="amdgpu.sg_display=0"

TIP: You can use the little clipboard icon to the right of the code to copy to your clipboard.

Reboot

Suspend with lid while attached to power workaround

There is an active bug that occurs for some users, creating a bogus key press when you suspend. This provides a solid workaround.

sudo sh -c '[ ! -f /etc/udev/rules.d/20-suspend-fixes.rules ] && echo "ACTION==\"add\", SUBSYSTEM==\"serio\", DRIVERS==\"atkbd\", ATTR{power/wakeup}=\"disabled\"" > /etc/udev/rules.d/20-suspend-fixes.rules'

This checks for an existing /etc/udev/rules.d/20-suspend-fixes.rules file, if none is found, creates it and appends ACTION=="add", SUBSYSTEM=="serio", DRIVERS=="atkbd", ATTR{power/wakeup}="disabled" to the file.

Reboot

       

Buzzing sound from 3.5mm jack

  • Browse to the horizontal line in the upper left corner, click to open it.
  • Type out the word terminal, click to open it.
  • Copy/paste in the following code below.
  • Press the enter key, user password, enter key.
echo 0 | sudo tee /sys/module/snd_hda_intel/parameters/power_save

TIP: You can use the little clipboard icon to the right of the code to copy to your clipboard.

Reboot

     

3.5mm jack mic won't work

  • Browse to the horizontal line in the upper left corner, click to open it.
  • Type out the word terminal, click to open it.
  • Copy/paste in the following code below.
  • Press the enter key, user password, enter key.
sudo tee /etc/modprobe.d/alsa.conf <<< "options snd-hda-intel index=1,0 model=auto,dell-headset-multi"

TIP: You can use the little clipboard icon to the right of the code to copy to your clipboard.

     

Bonus Step (for former Mac users) Reduce Font Scaling to Match Your Needs

We received feedback that for users coming from OS X, installing GNOME Tweaks, browsing to Fonts, and reducing the font size from 1.00 to 0.80 may be preferred.

  • Goto Displays, set scaling to 200%. This will look too large, so let's fix the fonts.
  • Install with:
sudo dnf install gnome-tweaks -y

  • Open Tweaks by using the "Super" or Windows key, search tweaks, and enter.

  • At the top, select fonts. Now in that panel, scroll all the way down. Look for Size. Change from 1.00 to 0.80. Close Tweaks.

    Note: This is for the displays for the laptop only. This will look super odd on external displays and likely too large even still.