README_EN.md

This is an automatic translation, may be incorrect in some places. See sources and examples!

Gyverblinker

Timer with a counter for blinking an LED and other tasks

• in simple words: the library allows you to flash asynchronously with an LED several times
• Asynchronous work
• Installation of the number of operations
• installation of active and passive time
• Two tools: Virtblinker without binding to Pina and Blinker indicating the PIN

compatibility

All arduino

Content

• [installation] (# Install)
• [use] (#usage)
• [Example] (# Example)
• [versions] (#varsions)
• [bugs and feedback] (#fedback)

Installation

• The library can be found by the name ** gyverblinker ** and installed through the library manager in:
  • Arduino ide
  • Arduino ide v2
  • Platformio
• [download the library] (https://github.com/gyverlibs/gyverblinker/archive/refs/heads/main.zip). Zip archive for manual installation:
  • unpack and put in * C: \ Program Files (X86) \ Arduino \ Libraries * (Windows X64)
  • unpack and put in * C: \ Program Files \ Arduino \ Libraries * (Windows X32)
  • unpack and put in *documents/arduino/libraries/ *
  • (Arduino id) Automatic installation from. Zip: * sketch/connect the library/add .Zip library ... * and specify downloaded archive
• Read more detailed instructions for installing libraries [here] (https://alexgyver.ru/arduino-first/#%D0%A3%D1%81%D1%82%D0%B0%BD%D0%BE%BE%BE%BED0%B2%D0%BA%D0%B0_%D0%B1%D0%B8%D0%B1%D0%BB%D0%B8%D0%BE%D1%82%D0%B5%D0%BA)

Update

• I recommend always updating the library: errors and bugs are corrected in the new versions, as well as optimization and new features are added
• through the IDE library manager: find the library how to install and click "update"
• Manually: ** remove the folder with the old version **, and then put a new one in its place.“Replacement” cannot be done: sometimes in new versions, files that remain when replacing are deleted and can lead to errors!

Usage

Virtblinker

`` `CPP // Designer BLINker (); Blinker (Uint8_T PIN);

// Start flashing (quantity, period of vn, period off) VOID BLINK (int amount, uint16_t high, uint16_t low = 0);

VOID form ();// provoke a call reign VOID Stop ();// Stop flashing.Will not provoke a call Bool state ();// Exit status Bool Ready ();// will return True once when the blinking ends Bool Running ();// returns True while the system flashes uint16_t getleft ();// get the rest until the next switch to ms uint8_t getleft8 ();// get the rest until the next switch in the range 0-255 Bool Tick ();// ticker, call in LOOP.True will return once when switching the condition `` `

bud

`CPP VOID Init (Uint8_T PIN);// Indicate the pin VOID Invert (Bool Inv);// Invert the output // + inherits all functions from Virtblinker `

Example

Real

`` `CPP #include <blinker.h> Blinker LED (13);

VOID setup () { // to blink 5 times, 700ms VKL, 400MS off led.blink (5, 700, 400); } VOID loop () { led.tick (); } `` `

virtual

`` `CPP #include <blinker.h> Virtblinker Blink;

VOID setup () { Serial.Begin (115200); // to blink 5 times, 700ms VKL, 400MS off Blink.blink (5, 700, 400); } VOID LOop () { if (blink.tick ()) serial.println (blink.state ()); } `` `

versions

• V1.0

bugs and feedback

Create ** Issue ** when you find the bugs, and better immediately write to the mail [alex@alexgyver.ru] (mailto: alex@alexgyver.ru) The library is open for refinement and your ** pull Request ** 'ow!

When reporting about bugs or incorrect work of the library, it is necessary to indicate:

• The version of the library
• What is MK used
• SDK version (for ESP)
• version of Arduino ide
• whether the built -in examples work correctly, in which the functions and designs are used, leading to a bug in your code
• what code has been loaded, what work was expected from it and how it works in reality
• Ideally, attach the minimum code in which the bug is observed.Not a canvas of a thousand lines, but a minimum code