| Part | Quantity | Notes |
|---|---|---|
| M3x5x4 Heatset Insert | 9 | |
| 12032 Blower Fan | 1 | 5V or 24V depending on your setup |
| M3x8 BHCS | 3 | |
| M3x35 BHCS | 6 | |
| M3 Washer | 9 | optional, only to make better contact with the fan |
These numbers of screws and Heatsets are to populate all the mounting holes of the fan.
The Fan I used was this GDSTIME 12032 24V Dual Ball Bearing Blower Fan
Print the parts according to your choice of mount.
Follow the General Assembly Instructions.
To secure the fan to the duct use the M3x8 BHCS with a washer to secure the corners of the fan and the M3x35 BHCS with a washer to secure the remaining 6 inner holes.