Assembly process of the Scrabblepad This repo documents the assembly process of the Scrabblepad, a 15x15 keyboard/macropad/monstrosity designed and sold by Donut Cat. 1. Bend and insert all diodes. Make sure the black bar on the diode is at the side of the thicker white bar on the PCB. 2. Bend legs of diodes so they don't fall out. 3. Solder diodes and cut off legs. 4. Insert the Teensy++ header. Tip: put Teensy++ over headers to properly align the headers. Solder the headers. DO NOT solder the Teensy++ yet. 5. Insert all your switches. 6. Solder all your switches. 7. Insert your Teensy++ and solder it with the components facing the Scrabblepad.