You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
After several on/off cycles, the controller (TS0502B ) stops responding to commands and an error appears in the logs. The maximum brightness level in the settings becomes 1000 instead of 254.
This error and similar behavior is repeated on two HomeAssistant installations with different adapters - Sonoff ZBDongle-P and Egony Stick V4 with Zigbee2MQTT version 1.36.1-1.
Downgrade Zigbee2MQTT version 1.36.1-1 to 1.36.0-1 solve this problem
What did you expect to happen?
in Zigbee2MQTT version 1.36.0-1 all working with no errors and problems.
How to reproduce it (minimal and precise)
No response
Zigbee2MQTT version
1.36.1-1
Adapter firmware version
20221226
Adapter
Sonoff ZBDongle-P and Egony Stick V4
Setup
Add-on on Home Assistant Supervised 2024.4.1
Debug log
Publish 'set' 'state' to '0xa4c138f7dbfa8df2' failed: 'RangeError [ERR_OUT_OF_RANGE]: ZCL command 0xa4c138f7dbfa8df2/1 genLevelCtrl.moveToLevelWithOnOff({"level":724,"transtime":0}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (The value of "value" is out of range. It must be >= 0 and <= 255. Received 724)'
and some log with wrong "brightness" value:
2024-04-08 01:01:44MQTT publish: topic 'zigbee2mqtt/0xa4c138f7dbfa8df2', payload '{"brightness":1000,"color_mode":"xy","color_temp":0,"do_not_disturb":true,"last_seen":"2024-04-07T18:01:45.718Z","linkquality":36,"state":"OFF"}'
Info 2024-04-08 01:01:44MQTT publish: topic 'zigbee2mqtt/0xa4c138f7dbfa8df2', payload '{"brightness":1000,"color_mode":"xy","color_temp":0,"do_not_disturb":true,"last_seen":"2024-04-07T18:01:46.125Z","linkquality":40,"state":"OFF"}'
Info 2024-04-08 01:01:45MQTT publish: topic 'zigbee2mqtt/0xa4c138f7dbfa8df2', payload '{"brightness":1000,"color_mode":"xy","color_temp":0,"do_not_disturb":true,"last_seen":"2024-04-07T18:01:46.613Z","linkquality":36,"state":"OFF"}'
Info 2024-04-08 01:01:45MQTT publish: topic 'zigbee2mqtt/0xa4c138f7dbfa8df2', payload '{"brightness":1000,"color_mode":"xy","color_temp":0,"do_not_disturb":true,"last_seen":"2024-04-07T18:01:46.815Z","linkquality":40,"state":"OFF"}'
The text was updated successfully, but these errors were encountered:
What happened?
After several on/off cycles, the controller (TS0502B ) stops responding to commands and an error appears in the logs. The maximum brightness level in the settings becomes 1000 instead of 254.
This error and similar behavior is repeated on two HomeAssistant installations with different adapters - Sonoff ZBDongle-P and Egony Stick V4 with Zigbee2MQTT version 1.36.1-1.
Downgrade Zigbee2MQTT version 1.36.1-1 to 1.36.0-1 solve this problem
What did you expect to happen?
in Zigbee2MQTT version 1.36.0-1 all working with no errors and problems.
How to reproduce it (minimal and precise)
No response
Zigbee2MQTT version
1.36.1-1
Adapter firmware version
20221226
Adapter
Sonoff ZBDongle-P and Egony Stick V4
Setup
Add-on on Home Assistant Supervised 2024.4.1
Debug log
Publish 'set' 'state' to '0xa4c138f7dbfa8df2' failed: 'RangeError [ERR_OUT_OF_RANGE]: ZCL command 0xa4c138f7dbfa8df2/1 genLevelCtrl.moveToLevelWithOnOff({"level":724,"transtime":0}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (The value of "value" is out of range. It must be >= 0 and <= 255. Received 724)'
and some log with wrong "brightness" value:
2024-04-08 01:01:44MQTT publish: topic 'zigbee2mqtt/0xa4c138f7dbfa8df2', payload '{"brightness":1000,"color_mode":"xy","color_temp":0,"do_not_disturb":true,"last_seen":"2024-04-07T18:01:45.718Z","linkquality":36,"state":"OFF"}'
Info 2024-04-08 01:01:44MQTT publish: topic 'zigbee2mqtt/0xa4c138f7dbfa8df2', payload '{"brightness":1000,"color_mode":"xy","color_temp":0,"do_not_disturb":true,"last_seen":"2024-04-07T18:01:46.125Z","linkquality":40,"state":"OFF"}'
Info 2024-04-08 01:01:45MQTT publish: topic 'zigbee2mqtt/0xa4c138f7dbfa8df2', payload '{"brightness":1000,"color_mode":"xy","color_temp":0,"do_not_disturb":true,"last_seen":"2024-04-07T18:01:46.613Z","linkquality":36,"state":"OFF"}'
Info 2024-04-08 01:01:45MQTT publish: topic 'zigbee2mqtt/0xa4c138f7dbfa8df2', payload '{"brightness":1000,"color_mode":"xy","color_temp":0,"do_not_disturb":true,"last_seen":"2024-04-07T18:01:46.815Z","linkquality":40,"state":"OFF"}'
The text was updated successfully, but these errors were encountered: