Skip to content

Latest commit

 

History

History
37 lines (22 loc) · 896 Bytes

wacom_ii.md

File metadata and controls

37 lines (22 loc) · 896 Bytes
Raw

Wacom II:

Usage

  • Follow General Usage

  • Run KuuubeTD/wacom_ii.py

  • Optionally, you can set the first three dip switches in DS 2 (Dip Switch Bank 2) to on. You may need to unscrew a cover to get to the dip switches. (Turn off your tablet before attempting this.)

    This will increase the baud rate to 19200 and allow the tablet to send at a faster rate. If you make this change you will also need to change SERIAL_PORT_INITIAL_BAUD_RATE in internal_constants.py to 19200.

    If you make a mistake or need to reset to defaults for any reason see: Wacom II Dip Switch Defaults.

Notes

Settings Commands Applied by Driver:

RE
PH1
AS1
IN0
SR

Setting Data

RE reset to default command set

PH1 pressure mode: on

AS1 data format: binary

IN0 increment mode: 0

SR stream mode: on