Skip to content

Latest commit

 

History

History
24 lines (17 loc) · 1.08 KB

README.md

File metadata and controls

24 lines (17 loc) · 1.08 KB
Raw

Slim Body

English | 简体中文

Some 3D printers have build volumes that are too small to print the full size OpenBot body. This folder contains the slim version of the OpenBot body. It can be printed with a build plate of 220mmx220mm when the parts are rotated 45 degrees.

Slim Body

Parts

  1. slim_body_bottom (STL, STEP)
  2. slim_body_top (STL, STEP)

In order to make it fit you may have to adjust the following settings to get the maximum print area.

  • Set Build Plate Adhesion Type to "None" (Brim, Skirt and Raft increase the overall size of your print)
  • Disable prime blob (in Build Plate section)
  • Disable the second extruder (if your printer has one)

If you do have a little extra space (223mmx223mm), you can also print the slim_body_top_rim (STL, STEP). It has a slightly larger rim making it easier to take the top off.