zipkin.md

title	keywords	description
zipkin	APISIX Plugin Zipkin zipkin	This document contains information about the Apache zipkin Plugin.

Description

Zipkin is an open source distributed tracing system. The zipkin Plugin supports collecting and reporting traces to Zipkin collector based on the Zipkin API specification.

It also works with Apache SkyWalking and Jaeger, both of which support Zipkin v1 and v2 APIs. It can also work with other tracing systems adapted to Zipkin v1/v2 API format.

Attributes

Name	Type	Required	Default	Valid values	Description
endpoint	string	True			Zipkin HTTP endpoint. For example, http://127.0.0.1:9411/api/v2/spans.
sample_ratio	number	True		[0.00001, 1]	How often to sample the requests. Setting to 1 will sample all requests.
service_name	string	False	"APISIX"		Service name for the Zipkin reporter to be displayed in Zipkin.
server_addr	string	False	$server_addr		IPv4 address for the Zipkin reporter. You can specify your external IP address.
span_version	integer	False	2	[1, 2]	Version of the span type.

Each traced request will create the spans shown below:

request
├── proxy: from the beginning of the request to the beginning of header filter
└── response: from the beginning of header filter to the beginning of log

For older versions (set span_version attribute to 1), these spans are created:

request
├── rewrite
├── access
└── proxy
    └── body_filter

:::note

The span name doesn't represent the corresponding Nginx phase.

:::

Sample code for upstream configuration

func GetTracer(serviceName string, port int, enpoitUrl string, rate float64) *zipkin.Tracer {
    // create a reporter to be used by the tracer
    reporter := httpreporter.NewReporter(enpoitUrl)
    // set-up the local endpoint for our service host is ip:host

    thisip, _ := GetLocalIP()

    host := fmt.Sprintf("%s:%d", thisip, port)
    endpoint, _ := zipkin.NewEndpoint(serviceName, host)
    // set-up our sampling strategy
    sampler, _ := zipkin.NewCountingSampler(rate)
    // initialize the tracer
    tracer, _ := zipkin.NewTracer(
        reporter,
        zipkin.WithLocalEndpoint(endpoint),
        zipkin.WithSampler(sampler),
    )
    return tracer
}

func main(){
    r := gin.Default()

    tracer := GetTracer(...)

    // use middleware to extract parentID from http header that injected by APISIX
    r.Use(func(c *gin.Context) {
        span := this.Tracer.Extract(b3.ExtractHTTP(c.Request))
        childSpan := this.Tracer.StartSpan(spanName, zipkin.Parent(span))
        defer childSpan.Finish()
        c.Next()
    })

}

Enabling the Plugin

The example below enables the Plugin on a specific Route:

curl http://127.0.0.1:9180/apisix/admin/routes/1  -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "methods": ["GET"],
    "uri": "/index.html",
    "plugins": {
        "zipkin": {
            "endpoint": "http://127.0.0.1:9411/api/v2/spans",
            "sample_ratio": 1,
            "service_name": "APISIX-IN-SG",
            "server_addr": "192.168.3.50"
        }
    },
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "127.0.0.1:1980": 1
        }
    }
}'

Example usage

You need to have your Zipkin instance running. You can run Zipkin on Docker by running:

docker run -d -p 9411:9411 openzipkin/zipkin

Now, when you make requests, it will be updated in Zipkin:

curl http://127.0.0.1:9080/index.html

HTTP/1.1 200 OK
...

You can then open up the Zipkin UI on your browser at http://127.0.0.1:9411/zipkin:

Reporting traces to Jaeger

The Plugin also supports reporting traces to Jaeger. First, you have to have Jaeger running.

To run it on Docker:

docker run -d --name jaeger \
  -e COLLECTOR_ZIPKIN_HOST_PORT=:9411 \
  -p 16686:16686 \
  -p 9411:9411 \
  jaegertracing/all-in-one:1.31

Similar to configuring for Zipkin, create a Route and enable the Plugin:

curl http://127.0.0.1:9180/apisix/admin/routes/1  -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "methods": ["GET"],
    "uri": "/index.html",
    "plugins": {
        "zipkin": {
            "endpoint": "http://127.0.0.1:9411/api/v2/spans",
            "sample_ratio": 1,
            "service_name": "APISIX-IN-SG",
            "server_addr": "192.168.3.50"
        }
    },
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "127.0.0.1:1980": 1
        }
    }
}'

Now, when you make requests, it will be updated on Jaeger:

curl http://127.0.0.1:9080/index.html

HTTP/1.1 200 OK
...

You can access the Jaeger UI to view the traces in endpoint http://127.0.0.1:16686:

Disable Plugin

To disable the zipkin Plugin, you can delete the corresponding JSON configuration from the Plugin configuration. APISIX will automatically reload and you do not have to restart for this to take effect.

curl http://127.0.0.1:9180/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "methods": ["GET"],
    "uri": "/index.html",
    "plugins": {
    },
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "127.0.0.1:1980": 1
        }
    }
}'