| title | keywords | description | |||
|---|---|---|---|---|---|
Health Check |
|
This article describes how to use the health check feature of API Gateway Apache APISIX to check the health status of upstream nodes. |
This article mainly introduces the health check function of Apache APISIX. The health check function can proxy requests to healthy nodes when the upstream node fails or migrates, avoiding the problem of service unavailability to the greatest extent. The health check function of APISIX is implemented using lua-resty-healthcheck, which is divided into active check and passive check.
Active health check mainly means that APISIX actively detects the survivability of upstream nodes through preset probe types. APISIX supports three probe types: HTTP, HTTPS, and TCP.
When N consecutive probes sent to healthy node A fail, the node will be marked as unhealthy, and the unhealthy node will be ignored by APISIX's load balancer and cannot receive requests; if For an unhealthy node, if M consecutive probes are successful, the node will be re-marked as healthy and can be proxied.
Passive health check refers to judging whether the corresponding upstream node is healthy by judging the response status of the request forwarded from APISIX to the upstream node. Compared with the active health check, the passive health check method does not need to initiate additional probes, but it cannot sense the node status in advance, and there may be a certain amount of failed requests.
If N consecutive requests to a healthy node A fail, the node will be marked as unhealthy.
:::note
Since unhealthy nodes cannot receive requests, nodes cannot be re-marked as healthy using the passive health check strategy alone, so combining the active health check strategy is usually necessary.
:::
:::tip
- We only start the health check when the upstream is hit by a request. There won't be any health check if an upstream is configured but isn't in used.
- If there is no healthy node can be chosen, we will continue to access the upstream.
- We won't start the health check when the upstream only has one node, as we will access it whether this unique node is healthy or not.
:::
| Name | Configuration type | Value type | Valid values | Default | Description |
|---|---|---|---|---|---|
| upstream.checks.active.type | Active check | string | http https tcp |
http | The type of active check. |
| upstream.checks.active.timeout | Active check | integer | 1 | The timeout period of the active check (unit: second). | |
| upstream.checks.active.concurrency | Active check | integer | 10 | The number of targets to be checked at the same time during the active check. | |
| upstream.checks.active.http_path | Active check | string | / | The HTTP request path that is actively checked. | |
| upstream.checks.active.host | Active check | string | ${upstream.node.host} | The hostname of the HTTP request actively checked. | |
| upstream.checks.active.port | Active check | integer | 1 to 65535 |
${upstream.node.port} | The host port of the HTTP request that is actively checked. |
| upstream.checks.active.https_verify_certificate | Active check | boolean | true | Active check whether to check the SSL certificate of the remote host when HTTPS type checking is used. | |
| upstream.checks.active.req_headers | Active check | array | [] | Active check When using HTTP or HTTPS type checking, set additional request header information. | |
| upstream.checks.active.healthy.interval | Active check (healthy node) | integer | >= 1 |
1 | Active check (healthy node) check interval (unit: second) |
| upstream.checks.active.healthy.http_statuses | Active check (healthy node) | array | 200 to 599 |
[200, 302] | Active check (healthy node) HTTP or HTTPS type check, the HTTP status code of the healthy node. |
| upstream.checks.active.healthy.successes | Active check (healthy node) | integer | 1 to 254 |
2 | Active check (healthy node) determine the number of times a node is healthy. |
| upstream.checks.active.unhealthy.interval | Active check (unhealthy node) | integer | >= 1 |
1 | Active check (unhealthy node) check interval (unit: second) |
| upstream.checks.active.unhealthy.http_statuses | Active check (unhealthy node) | array | 200 to 599 |
[429, 404, 500, 501, 502, 503, 504, 505] | Active check (unhealthy node) HTTP or HTTPS type check, the HTTP status code of the non-healthy node. |
| upstream.checks.active.unhealthy.http_failures | Active check (unhealthy node) | integer | 1 to 254 |
5 | Active check (unhealthy node) HTTP or HTTPS type check, determine the number of times that the node is not healthy. |
| upstream.checks.active.unhealthy.tcp_failures | Active check (unhealthy node) | integer | 1 to 254 |
2 | Active check (unhealthy node) TCP type check, determine the number of times that the node is not healthy. |
| upstream.checks.active.unhealthy.timeouts | Active check (unhealthy node) | integer | 1 to 254 |
3 | Active check (unhealthy node) to determine the number of timeouts for unhealthy nodes. |
| upstream.checks.passive.healthy.http_statuses | Passive check (healthy node) | array | 200 to 599 |
[200, 201, 202, 203, 204, 205, 206, 207, 208, 226, 300, 301, 302, 303, 304, 305, 306, 307, 308] | Passive check (healthy node) HTTP or HTTPS type check, the HTTP status code of the healthy node. |
| upstream.checks.passive.healthy.successes | Passive check (healthy node) | integer | 0 to 254 |
5 | Passive checks (healthy node) determine the number of times a node is healthy. |
| upstream.checks.passive.unhealthy.http_statuses | Passive check (unhealthy node) | array | 200 to 599 |
[429, 500, 503] | Passive check (unhealthy node) HTTP or HTTPS type check, the HTTP status code of the non-healthy node. |
| upstream.checks.passive.unhealthy.tcp_failures | Passive check (unhealthy node) | integer | 0 to 254 |
2 | Passive check (unhealthy node) When TCP type is checked, determine the number of times that the node is not healthy. |
| upstream.checks.passive.unhealthy.timeouts | Passive check (unhealthy node) | integer | 0 to 254 |
7 | Passive checks (unhealthy node) determine the number of timeouts for unhealthy nodes. |
| upstream.checks.passive.unhealthy.http_failures | Passive check (unhealthy node) | integer | 0 to 254 |
5 | Passive check (unhealthy node) The number of times that the node is not healthy during HTTP or HTTPS type checking. |
You can enable health checks in routes via the Admin API:
curl http://127.0.0.1:9180/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
"uri": "/index.html",
"plugins": {
"limit-count": {
"count": 2,
"time_window": 60,
"rejected_code": 503,
"key": "remote_addr"
}
},
"upstream": {
"nodes": {
"127.0.0.1:1980": 1,
"127.0.0.1:1970": 1
},
"type": "roundrobin",
"retries": 2,
"checks": {
"active": {
"timeout": 5,
"http_path": "/status",
"host": "foo.com",
"healthy": {
"interval": 2,
"successes": 1
},
"unhealthy": {
"interval": 1,
"http_failures": 2
},
"req_headers": ["User-Agent: curl/7.29.0"]
},
"passive": {
"healthy": {
"http_statuses": [200, 201],
"successes": 3
},
"unhealthy": {
"http_statuses": [500],
"http_failures": 3,
"tcp_failures": 3
}
}
}
}
}'If APISIX detects an unhealthy node, the following logs will be output in the error log:
enabled healthcheck passive while logging request
failed to receive status line from 'nil (127.0.0.1:1980)': closed
unhealthy TCP increment (1/2) for '(127.0.0.1:1980)'
failed to receive status line from 'nil (127.0.0.1:1980)': closed
unhealthy TCP increment (2/2) for '(127.0.0.1:1980':::tip
To observe the above log information, you need to adjust the error log level to info.
:::
The health check status can be fetched via GET /v1/healthcheck in Control API.
curl http://127.0.0.1:9090/v1/healthcheck/upstreams/healthycheck -s | jq .