diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 102036efb396..3b08e6635f33 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -2746,16 +2746,6 @@ static_assert(COUNT(arm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _L
     #error "DWIN_LCD_PROUI requires SDSUPPORT to be enabled."
   #elif ALL(LCD_BED_LEVELING, PROBE_MANUALLY)
     #error "DWIN_LCD_PROUI does not support LCD_BED_LEVELING with PROBE_MANUALLY."
-  #elif ENABLED(MEDIASORT_MENU_ITEM) && !ALL(SDCARD_SORT_ALPHA, SDSORT_GCODE)
-    #error "MEDIASORT_MENU_ITEM requires SDCARD_SORT_ALPHA and SDSORT_GCODE."
-  #elif ENABLED(RUNOUT_TUNE_ITEM) && DISABLED(HAS_FILAMENT_SENSOR)
-    #error "RUNOUT_TUNE_ITEM requires HAS_FILAMENT_SENSOR."
-  #elif ENABLED(PLR_TUNE_ITEM) && DISABLED(POWER_LOSS_RECOVERY)
-    #error "PLR_TUNE_ITEM requires POWER_LOSS_RECOVERY."
-  #elif ENABLED(JD_TUNE_ITEM) && DISABLED(HAS_JUNCTION_DEVIATION)
-    #error "JD_TUNE_ITEM requires HAS_JUNCTION_DEVIATION."
-  #elif ENABLED(ADVK_TUNE_ITEM) && DISABLED(LIN_ADVANCE)
-    #error "ADVK_TUNE_ITEM requires LIN_ADVANCE."
   #endif
 #endif
 
diff --git a/Marlin/src/lcd/e3v2/proui/dwin.cpp b/Marlin/src/lcd/e3v2/proui/dwin.cpp
index 9bb585dea62c..a585f254de82 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin.cpp
+++ b/Marlin/src/lcd/e3v2/proui/dwin.cpp
@@ -268,7 +268,7 @@ Menu *stepsMenu = nullptr;
 #endif
 #if HAS_MESH
   Menu *meshMenu = nullptr;
-  #if ENABLED(PROUI_MESH_EDIT_MENU)
+  #if ENABLED(PROUI_MESH_EDIT)
     Menu *editMeshMenu = nullptr;
   #endif
 #endif
@@ -847,7 +847,7 @@ void updateVariable() {
 
 bool DWIN_lcd_sd_status = false;
 
-#if ENABLED(MEDIASORT_MENU_ITEM)
+#if ENABLED(PROUI_MEDIASORT)
   void setMediaSort() {
     toggleCheckboxLine(hmiData.mediaSort);
     card.setSortOn(hmiData.mediaSort ? TERN(SDSORT_REVERSE, AS_REV, AS_FWD) : AS_OFF);
@@ -1759,7 +1759,7 @@ void dwinSetDataDefaults() {
   #if ALL(LCD_BED_TRAMMING, HAS_BED_PROBE)
     hmiData.fullManualTramming = DISABLED(BED_TRAMMING_USE_PROBE);
   #endif
-  #if ENABLED(MEDIASORT_MENU_ITEM)
+  #if ENABLED(PROUI_MEDIASORT)
     hmiData.mediaSort = true;
     card.setSortOn(TERN(SDSORT_REVERSE, AS_REV, AS_FWD));
   #endif
@@ -3130,7 +3130,7 @@ void drawAdvancedSettingsMenu() {
     #if HAS_GCODE_PREVIEW
       EDIT_ITEM(ICON_File, MSG_HAS_PREVIEW, onDrawChkbMenu, setPreview, &hmiData.enablePreview);
     #endif
-    #if ENABLED(MEDIASORT_MENU_ITEM)
+    #if ENABLED(PROUI_MEDIASORT)
       EDIT_ITEM(ICON_File, MSG_MEDIA_SORT, onDrawChkbMenu, setMediaSort, &hmiData.mediaSort);
     #endif
     EDIT_ITEM(ICON_File, MSG_MEDIA_UPDATE, onDrawChkbMenu, setMediaAutoMount, &hmiData.mediaAutoMount);
@@ -3323,16 +3323,16 @@ void drawTuneMenu() {
     #if HAS_FILAMENT_SENSOR
       EDIT_ITEM(ICON_Runout, MSG_RUNOUT_ENABLE, onDrawChkbMenu, setRunoutEnable, &runout.enabled);
     #endif
-    #if ENABLED(PLR_TUNE_ITEM)
+    #if ENABLED(PROUI_ITEM_PLR)
       EDIT_ITEM(ICON_Pwrlossr, MSG_OUTAGE_RECOVERY, onDrawChkbMenu, setPwrLossr, &recovery.enabled);
     #endif
     #if ENABLED(FWRETRACT)
       MENU_ITEM(ICON_FWRetract, MSG_FWRETRACT, onDrawSubMenu, drawFWRetractMenu);
     #endif
-    #if ENABLED(JD_TUNE_ITEM)
+    #if ENABLED(PROUI_ITEM_JD)
       EDIT_ITEM(ICON_JDmm, MSG_JUNCTION_DEVIATION, onDrawPFloat3Menu, setJDmm, &planner.junction_deviation_mm);
     #endif
-    #if ENABLED(ADVK_TUNE_ITEM)
+    #if ENABLED(PROUI_ITEM_ADVK)
       EDIT_ITEM(ICON_MaxAccelerated, MSG_ADVANCE_K, onDrawPFloat3Menu, setLA_K, &planner.extruder_advance_K[0]);
     #endif
     #if HAS_LOCKSCREEN
@@ -3952,7 +3952,7 @@ void drawStepsMenu() {
     void setBedLevT() { setPIntOnClick(MIN_BEDTEMP, MAX_BEDTEMP); }
   #endif
 
-  #if ENABLED(PROUI_MESH_EDIT_MENU)
+  #if ENABLED(PROUI_MESH_EDIT)
     #define Z_OFFSET_MIN -3
     #define Z_OFFSET_MAX  3
 
@@ -4029,7 +4029,7 @@ void drawStepsMenu() {
         MENU_ITEM(ICON_UBLTiltGrid, MSG_UBL_TILT_MESH, onDrawMenuItem, ublMeshTilt);
         MENU_ITEM(ICON_UBLSmartFill, MSG_UBL_SMART_FILLIN, onDrawMenuItem, ublSmartFillMesh);
       #endif
-      #if ENABLED(PROUI_MESH_EDIT_MENU)
+      #if ENABLED(PROUI_MESH_EDIT)
         MENU_ITEM(ICON_MeshReset, MSG_MESH_RESET, onDrawMenuItem, ResetMesh);
         MENU_ITEM(ICON_MeshEdit, MSG_EDIT_MESH, onDrawSubMenu, drawEditMeshMenu);
       #endif
@@ -4038,7 +4038,7 @@ void drawStepsMenu() {
     updateMenu(meshMenu);
   }
 
-  #if ENABLED(PROUI_MESH_EDIT_MENU)
+  #if ENABLED(PROUI_MESH_EDIT)
     void drawEditMeshMenu() {
       if (!leveling_is_valid()) { LCD_MESSAGE(MSG_UBL_MESH_INVALID); return; }
       set_bed_leveling_enabled(false);
diff --git a/Marlin/src/lcd/e3v2/proui/dwin.h b/Marlin/src/lcd/e3v2/proui/dwin.h
index f746a28c9da1..26b7fec5fda8 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin.h
+++ b/Marlin/src/lcd/e3v2/proui/dwin.h
@@ -137,7 +137,7 @@ typedef struct {
   #if ALL(LCD_BED_TRAMMING, HAS_BED_PROBE)
     bool fullManualTramming = false;
   #endif
-  #if ENABLED(MEDIASORT_MENU_ITEM)
+  #if ENABLED(PROUI_MEDIASORT)
     bool mediaSort = true;
   #endif
   bool mediaAutoMount = ENABLED(HAS_SD_EXTENDER);
@@ -343,7 +343,7 @@ void drawStepsMenu();
 #endif
 #if HAS_MESH
   void drawMeshSetMenu();
-  #if ENABLED(PROUI_MESH_EDIT_MENU)
+  #if ENABLED(PROUI_MESH_EDIT)
     void drawEditMeshMenu();
   #endif
 #endif
diff --git a/Marlin/src/lcd/e3v2/proui/dwin_defines.h b/Marlin/src/lcd/e3v2/proui/dwin_defines.h
index 33d8b8de1954..df4196edfef0 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin_defines.h
+++ b/Marlin/src/lcd/e3v2/proui/dwin_defines.h
@@ -79,33 +79,23 @@
 #define DEF_PIDCYCLES 5
 
 /**
-* ProUI Menu Options
-* Choose which feature you would like to Enable or Disable
-*/
-#if ENABLED(SDCARD_SORT_ALPHA)
-  #define MEDIASORT_MENU_ITEM
-  #if ENABLED(MEDIASORT_MENU_ITEM) && (SDSORT_GCODE == false)
-    // MEDIASORT_MENU_ITEM needs SDSORT_GCODE to be 'true'
-    #undef SDSORT_GCODE
-    #define SDSORT_GCODE true
-  #endif
-#endif
-#if ENABLED(HAS_FILAMENT_SENSOR)
-  #define RUNOUT_TUNE_ITEM
+ * ProUI internal feature flags
+ */
+#if ALL(SDCARD_SORT_ALPHA, SDSORT_GCODE)
+  #define PROUI_MEDIASORT
 #endif
 #if ENABLED(POWER_LOSS_RECOVERY)
-  #define PLR_TUNE_ITEM       // Power-loss Recovery option in Tune Menu
+  #define PROUI_ITEM_PLR    // Tune > Power-loss Recovery
 #endif
 #if ENABLED(HAS_JUNCTION_DEVIATION)
-  #define JD_TUNE_ITEM        // Juntion Deviation item in Tune Menu
+  #define PROUI_ITEM_JD     // Tune > Junction Deviation
 #endif
 #if ENABLED(LIN_ADVANCE)
-  #define ADVK_TUNE_ITEM      // Linear Advance item in Tune Menu
+  #define PROUI_ITEM_ADVK   // Tune > Linear Advance
 #endif
 #if HAS_MESH
-  #define PROUI_MESH_EDIT_MENU  // Add a menu to edit mesh points
+  #define PROUI_MESH_EDIT   // Add a menu to edit mesh points
 #endif
-
 #define HAS_GCODE_PREVIEW 1
 #define HAS_CUSTOM_COLORS 1   // Change display colors
 #define HAS_ESDIAG 1          // View End-stop/Runout switch continuity