Skip to content

Latest commit

 

History

History
104 lines (77 loc) · 3.4 KB

FAQ.md

File metadata and controls

104 lines (77 loc) · 3.4 KB
Raw

Frequently Asked Questions

We often receive the same questions via email, and include this to answer some of the most common ones.

Installation

Failed install due to Python.h missing

  • Appears as:

    ...
zigbee_crypt/zigbee_crypt.c:13:10: fatal error: Python.h: No such file or directory
 #include <Python.h>
          ^~~~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1

  • Cause: The requirements were not installed per README.md, specifically the Python development package.

  • Fix: Install the requirement, such as sudo apt-get install -y python-dev (or python3-dev).

Failed install due to gcrypt.h missing

  • Appears as:

    ...
zigbee_crypt/zigbee_crypt.c:15:10: fatal error: gcrypt.h: No such file or directory
 #include <gcrypt.h>
          ^~~~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1

  • Cause: The requirements were not installed per README.md, specifically the gcrypt development package.

  • Fix: Install the requirement, such as sudo apt-get install -y libgcrypt-dev.

Device Usage

Atmel RZUSBSTICK

Flashing

See firmware/README.md for details.

ValueError device has no langid

  • Appears as:

    zbid
...
Traceback (most recent call last):
  File "/usr/local/bin/zbid", line 23, in <module>
    show_dev(gps=arg_gpsdev, include=args.include)
  File "/usr/local/lib/python2.7/dist-packages/killerbee/__init__.py", line 46, in show_dev
    for dev in kbutils.devlist(vendor=vendor, product=product, gps=gps, include=include):
  File "/usr/local/lib/python2.7/dist-packages/killerbee/kbutils.py", line 285, in devlist
    devlist = devlist_usb_v1x(vendor, product)
  File "/usr/local/lib/python2.7/dist-packages/killerbee/kbutils.py", line 215, in devlist_usb_v1x
    usb.util.get_string(dev, dev.iProduct),     \
  File "/usr/lib/python2.7/dist-packages/usb/util.py", line 314, in get_string
    raise ValueError("The device has no langid")
ValueError: The device has no langid

  • Cause: USB permissions

  • Fix: Run as sudo, or change the permissions to the USB device so your user can query it

Apimote v4beta

Does not enumerate reliably

  • Appears as:

    • Device doesn't show up in zbid sometimes
    • "Serial timeout" message printed to console during running commands

  • Cause: As detailed on the page for this device, it is in beta due to instability observed with it establishing a serial sync with some hosts.

  • Fix:

    • Help improve it, likely by working on the settings for the FTDI chip on the PCB
    • Specify the device using -i when you run commands, so enumeration doesn't need to be run each time
    • Unplug and replug the device as needed

Does not get frames received

  • Appears as: Missing frames that you expect and see with other devices
  • Cause: Often we find that users are not attaching the antenna as required.
  • Fix: As detailed in the product documentation, you must either:
    • have an appropriate antenna attached to the RP-SMA port
    • or, move the component C501 on the PCB to select the internal antenna

Shows v2 when it enumerates

  • Appears as: zbid lists the device as 'v2'
  • Cause: expected behavior, as from the software side only v1 is different than v2-v4, and thus it doesn't see a difference
  • Fix: N/A