Skip to content

Latest commit

 

History

History
153 lines (103 loc) · 3.02 KB

README.md

File metadata and controls

153 lines (103 loc) · 3.02 KB
Raw

Shift Register 74HC595

Dynamic class to manage Shift Register 74HC595 in Raspberry Pi using Python

Requirements

* Raspberry Pi
* Python 2.6+ and Python development tools
* RPi.GPIO (latest version recommended)

Installation

Install RPi.GPIO library and Python development tools:

sudo apt-get update && sudo apt-get -y install python-rpi.gpio python-dev

Get this library:

Using pip:

pip install git+https://github.com/marsminds/shiftr_74HC595.git

Example

Scheme

import RPi.GPIO as GPIO
from shiftr_74HC595.shiftr_74HC595 import ShiftRegister
from time import sleep

GPIO.setmode(GPIO.BOARD)

data_pin = 7 #pin 14 on the 75HC595
latch_pin = 11 #pin 12 on the 75HC595
clock_pin = 12 #pin 11 on the 75HC595

shift_register = ShiftRegister(data_pin, latch_pin, clock_pin)

try:
    while 1:
        # Set all outputs
        shift_register.setOutputs([GPIO.HIGH, GPIO.LOW, GPIO.LOW, GPIO.LOW, GPIO.HIGH, GPIO.LOW, GPIO.LOW, GPIO.HIGH])

        # Display
        shift_register.latch()

        sleep(1)

        # Set some output individually
        shift_register.setOutput(0, GPIO.LOW)
        shift_register.setOutput(5, GPIO.HIGH)

        shift_register.latch()

        sleep(1)
except KeyboardInterrupt:
    print "Ctrl-C - quit"

GPIO.cleanup()

API

Constructor

Instanciate and configure pin of a shift register.

ShiftRegister(data_pin, latch_pin, clock_pin)
data_pin => pin 14 on the 74HC595
latch_pin => pin 12 on the 74HC595
clock_pin => pin 11 on the 74HC595

Example:

# Instanciate a new shiftregister wired on pins 14, 15, 18 of the Raspberry
shift_register = ShiftRegister(14, 15, 18)

Method setOutput

Update an individual output of the shift register.

shift_register.setOutput(output_number, value)
output_number => Value from 0 to 7 pointing to the output pin on the 74HC595
0 => Q0 pin 15 on the 74HC595
1 => Q1 pin 1 on the 74HC595
2 => Q2 pin 2 on the 74HC595
3 => Q3 pin 3 on the 74HC595
4 => Q4 pin 4 on the 74HC595
5 => Q5 pin 5 on the 74HC595
6 => Q6 pin 6 on the 74HC595
7 => Q7 pin 7 on the 74HC595

value => a state to pass to the pin, could be HIGH or LOW

Example:

# Set Q3 to high in register
shift_register.setOutput(3, GPIO.HIGH)

shift_register.latch()

Method setOutputs

Update all outputs of the shift register.

shift_register.setOutputs(outputs)
outputs => an array of height GPIO.LOW or GPIO.HIGH

Example:

# Draw a zebra
shift_register.setOutputs([GPIO.LOW, GPIO.HIGH,  GPIO.LOW, GPIO.HIGH, GPIO.LOW, GPIO.HIGH, GPIO.LOW, GPIO.HIGH])

shift_register.latch()

Method latch

Clock the shift register so the updated values are sent to shift register outputs.

shift_register.latch()

Example:

# Perform some updates...
shift_register.setOutput(3, GPIO.HIGH)

# Display result
shift_register.latch()