Cannot open virtual display Driver Control UI and not dectect Virtual虚拟显示器检察不到以及virtual display Driver Control UI面板打不开

[supermangithu]

Error message windows log:
日志名称: Application
来源: Windows Error Reporting
日期: 2023/10/23 20:07:16
事件 ID: 1001
任务类别: 无
级别: 信息
关键字: 经典
用户: 暂缺
计算机: DESKTOP-TKVNJV6
描述:
错误存储段 ，类型 0
事件名称: PnPDeviceProblemCode
响应: 不可用
Cab Id: 0

问题签名:
P1: x64
P2: Root\VirtualDisplayDriver
P3: {4d36e968-e325-11ce-bfc1-08002be10318}
P4: 0000001F
P5: WUDFRd.sys
P6: 10.0.14393.0
P7: 07-16-2016
P8:
P9:
P10:

附加文件:

可在此处获取这些文件:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_b5e1baa4902173c22f4f79fe2db5aee4baa60ba_00000000_386f4f92

分析符号:
重新检查解决方案: 0
报告 Id: 98da53ca-719c-11ee-a1f4-18dbf23e9b25
报告状态: 8192
哈希存储段:
事件 Xml:



1001
4
0
0x80000000000000

68083
Application
DESKTOP-TKVNJV6





0
PnPDeviceProblemCode
不可用
0
x64
Root\VirtualDisplayDriver
{4d36e968-e325-11ce-bfc1-08002be10318}
0000001F
WUDFRd.sys
10.0.14393.0
07-16-2016








C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_b5e1baa4902173c22f4f79fe2db5aee4baa60ba_00000000_386f4f92


0
98da53ca-719c-11ee-a1f4-18dbf23e9b25
8192

[MolotovCherry]

Is your driver running properly?

To be clear, this is not an error in the app. This means your driver is not running and able to receive the connection, so the app can't connect to it

[ZhiShengYuan]

try to install the driver in the Device manager, then reboot and open the device manager again, if you see two virtual display,then remove one and disable&enable another,it should works
设备管理器手动load一下驱动然后重启，并且检查设备管理器看看是不是有俩vd，是的话删除一个禁用/启用另一个

[MolotovCherry]

try to install the driver in the Device manager, then reboot and open the device manager again, if you see two virtual display,then remove one and disable&enable another,it should works 设备管理器手动load一下驱动然后重启，并且检查设备管理器看看是不是有俩vd，是的话删除一个禁用/启用另一个

@ZhiShengYuan

Thanks for shedding some light on it!

Could be a bug with the installer, but I haven't been able to reproduce this. If anyone can provide some steps to reproduce and recreate the problem, that'd be helpful! In the very worst case where it can't be easily solved, I can at the very least add this to the troubleshooting steps so it becomes obvious.

By the way, just as an added note. The driver does not require a reboot to start working (or was that part of your steps to reproduce?)

[MolotovCherry]

It's probably safe to say this is caused by #49 . Closing in favor of tracking in #49 . Please comment there if there is any information on how to reproduce this. Thanks!

[Healao]

try to install the driver in the Device manager, then reboot and open the device manager again, if you see two virtual display,then remove one and disable&enable another,it should works 设备管理器手动load一下驱动然后重启，并且检查设备管理器看看是不是有俩vd，是的话删除一个禁用/启用另一个

Hi,I can`t find the .msi file follow the md,then how can I install it?

[ZhiShengYuan]

try to install the driver in the Device manager, then reboot and open the device manager again, if you see two virtual display,then remove one and disable&enable another,it should works 设备管理器手动load一下驱动然后重启，并且检查设备管理器看看是不是有俩vd，是的话删除一个禁用/启用另一个

Hi,I can`t find the .msi file follow the md,then how can I install it?

consider download from here
https://github.com/MolotovCherry/virtual-display-rs/releases/tag/v0.3.1