-
Notifications
You must be signed in to change notification settings - Fork 230
Training your own wake word
Precise comes with a few executables used to train and test models.
First, run through the Source Install procedure on the readme.
Once installed, to gain access to these executables in the current terminal session,
run the command:
source .venv/bin/activateHere's a summary of all the executables:
-
precise-collect- Record audio samples for use with Precise -
precise-convert- Convert keyword model from Keras to TensorFlow -
precise-eval- Evaluate a list of models on a dataset -
precise-record- Run a model on microphone audio input -
precise-stream- Run a model on raw audio data -
precise-test- Test a model against a dataset -
precise-train- Train a new model on a dataset -
precise-train-incremental- Train a model to inhibit activation by marking false activations and retraining
For more info on each individual script, you can run <script-name> -h.
The rough process for training a model is as follows:
-
precise-collect- Record wake word samples -
precise-train- Initial training -
precise-train-incremental- Reduce false activations -
precise-test- Statistics on dataset accuracy -
precise-record- Real world test with your microphone -
precise-convert- Convert .net to .pb
The first thing you'll want to do is record some audio samples of your
wake word. To do that, use the tool, precise-collect, which will
guide you through recording a few samples. The default settings should be fine.
Use this tool to collect around 12 samples, making sure to leave a second or two of silence at the start of each recording, but with no silence after the wake word.
$ precise-collect
Audio name (Ex. recording-##): hey-computer.##
ALSA lib pcm_dsnoop.c:638:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1099:(snd_pcm_dmix_open) unable to open slave
ALSA lib pcm_dmix.c:1099:(snd_pcm_dmix_open) unable to open slave
Press space to record (esc to exit)...
Recording...
Saved as hey-computer.00.wav
Press space to record (esc to exit)...Now, place most of these files under hey-computer/keyword/ and the rest
under hey-computer/test/keyword:
hey-computer/
├── keyword/
│ ├── hey-computer.00.wav
│ ├── hey-computer.01.wav
│ ├── hey-computer.02.wav
│ ├── hey-computer.03.wav
│ ├── hey-computer.04.wav
│ ├── hey-computer.05.wav
│ ├── hey-computer.06.wav
│ ├── hey-computer.07.wav
│ └── hey-computer.08.wav
├── not-keyword/
└── test/
├── keyword/
│ ├── hey-computer.09.wav
│ ├── hey-computer.10.wav
│ ├── hey-computer.11.wav
│ └── hey-computer.12.wav
└── not-keyword/This tells Precise to train on the first 8 samples and evaluate the model's accuracy using the last 4.
Now, we can start to train a model with the precise-train tool:
$ precise-train -e 60 hey-computer.net hey-computer/
...
Epoch 1/20
2018-02-23 11:32:05.235740: I tensorflow/core/platform/cpu_feature_guard.cc:137] Your CPU supports instructions that this TensorFlow binary was not compiled to use: SSE4.1 SSE4.2 AVX AVX2 FMA
9/9 [==============================] - 0s 31ms/step - loss: 0.2620 - acc: 0.3333 - val_loss: 0.0836 - val_acc: 0.5000
...
Epoch 60/60
9/9 [==============================] - 0s 1ms/step - loss: 0.0025 - acc: 1.0000 - val_loss: 5.6518e-05 - val_acc: 1.0000Now, we can run this model against live microphone input with:
$ precise-record hey-computer.net
Using TensorFlow backend.
2018-02-23 12:46:22.622717: I tensorflow/core/platform/cpu_feature_guard.cc:137] Your CPU supports instructions that this TensorFlow binary was not compiled to use: SSE4.1 SSE4.2 AVX AVX2 FMA
ALSA lib pcm_dmix.c:1099:(snd_pcm_dmix_open) unable to open slave
ALSA lib pcm_route.c:867:(find_matching_chmap) Found no matching channel map
ALSA lib pcm_dmix.c:1099:(snd_pcm_dmix_open) unable to open slave
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!As you can see, the model has simply learned to activate to every noise, rather than specifically our wake word. Now what we need to do is reduce false activations by incorporating some data that the model should not activate on.
There are two ways of reducing false activations: recording your own
false activations and putting them in hey-computer/not-wake-word, or
using an automated process to find false positives in large, audio files
filled with everyday noise.
To record your own false activations, launch precise-record in save mode:
precise-record hey-computer.net -sNow you can say words similar to your wake word and everytime the model activates,
it will save that recording into the hey-computer/not-wake-word folder. Just make
sure never to say the actual wake word while in save mode.
Once you've gathered a few samples of new false activations, retrain your model with
the same precise-train command:
precise-train hey-computer.net hey-computer/ -e 600You can stop training with ctrl+c once the accuracy (acc) gets close to 1.0.
Now, you can repeat the process, running precise-record again. You should notice
the model learned not to activate on what it had failed on before.
While the first method works to a certain degree, you will still notice a large number of false activations during just everyday noise. To reduce the number of times the model activates when it shouldn't, we need a bunch of long audio files that don't have the wake word in it. You can use pretty much any set of sounds, but a diversified set of audio is better. A goot place to start is the Public Domain Sounds Backup. You can download it with:
cd data/random
wget http://downloads.tuxfamily.org/pdsounds/pdsounds_march2009.7z
# Install p7zip
7z x pdsounds_march2009.7z
cd ..After downloading a set of sounds, they probably won't be in the right format. They need
to be 16 bit signed integer mono wav files with a sample rate of 16000. However, don't
worry if that's not the case. All we need is the command line tool, ffmpeg, and the following
script:
SOURCE_DIR=data/random/mp3
DEST_DIR=data/random
for i in $SOURCE_DIR/*.mp3; do echo "Converting $i..."; fn=${i##*/}; ffmpeg "$i" -acodec pcm_s16le -ar 16000 -ac 1 "$DEST_DIR/${fn%.*}"; doneHere, you can see it runs ffmpeg input.mp3 -acodec pcm_s16le -ar 16000 -ac 1 output.wav on
all the mp3 files, placing the results in data/random. Now we are ready to reduce false
activations. Begin the process with the command:
precise-train-incremental hey-computer.net hey-computer/Now you will see it run through all the wav files in data/random, picking out clips where
it false activated, placing them into the hey-computer/not-wake-word directory, and
retraining. This process will take a while, depending on the total length of audio in the
dataset and your processor speed.
Once it finishes, we can look at how it performs against the test dataset with:
precise-test hey-computer.net hey-computer/And, we can test it again through the microphone with:
precise-record hey-computer.netFinally, if there are still too many false activations we can add more audio to
data/random and repeat the process. If it looks good, continue below.
So far, we've only dealt with .net files. This extension used throughout
Precise represents an HDF5 model file trained with Keras. To reduce
runtime dependencies, you must convert the .net Keras model into a
.pb TensorFlow model. Do this with the following command:
precise-convert hey-computer.netThat's it! Now the final, exported model consists of the following two files:
hey-computer.pbhey-computer.pb.params
The first contains the TensorFlow neural network and the second contains details specific to Precise for how the audio was processed for the network.