G7 calibration logs are confusing

[Navid200]

A post on facebook about G7 calibration with xDrip includes this screenshot.

There is no log stating that calibration was accepted by the transmitter as there is with G6.

I am going to open a PR to address the other two logs as they are clearly related to raw values and we know G7 does not send raw values. So, I will add a conditional not to print those two for G7 or regular G6.

But, can you give me tips about the missing acknowledgement and instead having an unknown message?

[Gonzmdv]

Hello, I started with G7 nine days ago. The first day, at some point the G7 readings were 40 mg/dl higher than my finger test (checked twice), so I tried to calibrate the sensor with my Tandem Slim X2 pump. Glucose readings didn't change, so i tried to calibrate it again with the pump and later with xDrip+, several times. No change. I was so tired that finally felt asleep I when I got up the sensor was showing the same values than my blood test, so I haven't tried to calibrate it again.
When I was using the G6, the sensor was showing the new value as soon as I typed the new calibration.

[Navid200]

If you calibrated with t:slim and saw unexpected behavior, it cannot have anything to do with xDrip.
xDrip is open source. T:slim is not. You can contact Dexcom and ask for advice about how you need to calibrate with T:slim.

A comparison between G6 and G7 has nothing to do with xDrip either.