OpenEmbedded for Tegra
-
|
According to NVIDIA's README file of initrd flash, I need to run |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 4 replies
-
|
No, you don't have to disable udisks2. In fact, as mentioned on wiki page, the scripts use And from my testing, I don't think you actually need to with stock L4T, either, at least with recent versions. |
Beta Was this translation helpful? Give feedback.
-
|
Hi. When I run initrd-flash today, it gives me some error:
What could be the reason for this issue? I already enabled "Never prompt or start programs on media insertion" in system settings. The logs are here: |
Beta Was this translation helpful? Give feedback.
-
|
Sounds like the automount behavior did not get shut off after all. Can you check If that's still set to and see if the problem goes away? If so, I'll update the wiki page to mention this. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for late reply. I tried reading the value, but strangely it did not return anything. Then I wrote false to it and flashed again, the automount error was gone and flash succeeded. So I guess this is the fix. Thanks a lot. |
Beta Was this translation helpful? Give feedback.
-
|
Just came around this error as well. Just figured out if you are using a remote session you will need to start dbus-launch to be able to edit settings with dconf. |
Beta Was this translation helpful? Give feedback.
No, you don't have to disable udisks2. In fact, as mentioned on wiki page, the scripts use
udisksctl(which talks to udisks2) to manage the USB mass storage devices.And from my testing, I don't think you actually need to with stock L4T, either, at least with recent versions.