Skip to content

Latest commit

 

History

History
105 lines (81 loc) · 8.88 KB

README.md

File metadata and controls

105 lines (81 loc) · 8.88 KB

OctopusDSC

This repository contains a PowerShell module with DSC resources that can be used to install and configure an Octopus Deploy Server and Tentacle agent.

There are two main resources:

Server authentication can be configured to use:

Other resources of note are:

Version 3.0 of OctopusDSC supports Octopus Deploy 4.x and above with backwards compatibility to 3.x

Installation

PowerShellGet / PowerShell 5 (recommended)

  1. Install PowerShellGet from PowerShell Gallery
  2. Install DSC module via PowerShellGet\Install-Module -Name OctopusDSC

Manual

  1. Download the latest release
  2. If required, unblock the zip file
  3. Extract the zip file to a folder called OctopusDSC under your modules folder (usually %USERPROFILE%\Documents\WindowsPowerShell\Modules)
  4. To confirm it's installed correctly, in a new powershell session run Get-Module -ListAvailable -Name OctopusDSC

The community has also submitted a few other options.

Development

This project is setup to use Vagrant to provide a dev/test environment. Once you've installed Vagrant, you can use the build scripts to spin up a local virtual machine and run the test scenarios (NOTE: The first time you run vagrant up in Virtualbox or Hyper-V it has to download the octopusdeploy/dsc-test-server box and this can take some time depending on your Internet speed, so be patient and go grab a coffee while it downloads).

There are four options provided:

On a build server, you most likely want to use build-aws.ps1 to spin up a virtual machine on AWS to run the tests.

Configuration is handled by environment variables. The shell scripts will show a message letting you know what variables need to be set. The build-* scripts also invoke Pester and PSScriptAnalyzer tests, so you'll need those modules installed. Be sure to update Pester, the version that ships with Windows 10 is incompatible.

To run just the scenarios locally, follow these steps:

  1. Install Vagrant from vagrantup.com. (Note: version after 2.2.3 have altered WinRM upload behaviour which may cause issues)
  2. Install VirtualBox from virtualbox.org or Hyper-V (Install-WindowsFeature –Name Hyper-V -IncludeManagementTools -Restart )
  3. If you are on a Mac or Linux you need to install PowerShell, see https://github.com/PowerShell/PowerShell/blob/master/docs/installation/linux.md.
  4. If you want to test locally using virtualbox
    • Download the Octopus version of vagrant-dsc
    • Run vagrant plugin install <filepath to downloaded .gem file> ie vagrant plugin install c:\temp\vagrant-dsc-2.0.2.gem
    • Run vagrant plugin install vagrant-winrm-syncedfolders
    • Run Set-ExecutionPolicy Bypass -Scope Process -Force; iex ((New-Object System.Net.WebClient).DownloadString('https://chocolatey.org/install.ps1')) to install Chocolatey on the Host system.
    • Run build-virtualbox.ps1. This will run all the scenarios under the Tests folder.
  5. If you want to test locally using Hyper-V
    • Download the Octopus version of vagrant-dsc
    • Run vagrant plugin install <filepath to downloaded .gem file> ie vagrant plugin install c:\temp\vagrant-dsc-2.0.2.gem
    • Run vagrant plugin install vagrant-winrm-syncedfolders
    • Run Set-ExecutionPolicy Bypass -Scope Process -Force; iex ((New-Object System.Net.WebClient).DownloadString('https://chocolatey.org/install.ps1')) to install Chocolatey on the Host system.
    • Optionally set the environment variable OctopusDSCVMSwitch, to use a specific Hyper-V switch by name. For example, for older Hyper-V systems, you may wish to set this to 'External Connection'
    • Run build-hyperv.ps1. This will run all the scenarios under the Tests folder.
  6. If you want to test using AWS
    • Run vagrant plugin install vagrant-aws. If you run into issues around libxml2, take a look at mitchellh/vagrant-aws#539
    • Run vagrant plugin install vagrant-aws-winrm
    • Set an environment variable AWS_ACCESS_KEY_ID to a valid value
    • Set an environment variable AWS_SECRET_ACCESS_KEY to a valid value
    • Set an environment variable AWS_SUBNET_ID to a valid subnet where you want the instance launched
    • Set an environment variable AWS_SECURITY_GROUP_ID to a valid security group you want to assign to the instance
    • Run build-aws.ps1. This will run all the scenarios under the Tests folder.
  7. If you want to test using Azure
    • Run vagrant plugin install vagrant-azure
    • Set an environment variable AZURE_VM_PASSWORD to a valid value
    • Set an environment variable AZURE_SUBSCRIPTION_ID to a valid value
    • Set an environment variable AZURE_TENANT_ID to a valid value
    • Set an environment variable AZURE_CLIENT_ID to a valid value
    • Srt an environment variable AZURE_CLIENT_SECRET to a valid value
    • Run build-azure.ps1. This will run all the scenarios under the Tests folder.
  8. Run vagrant destroy -f or the appropriate cleanup-*.ps1 once you have finished to kill the virtual machine.

Each of the build-* scripts can take parameters at the command prompt.

These are generally designed to tighten the feedback loop during development, since the VM-based integration test phase can be quite time consuming.

Parameter Type Default Value Description
-SkipPester Switch False Skips the Pester and PSScriptAnalyzer unit tests, going straight to the slower, VM-based integration tests.
-ServerOnly Switch False Runs only the Server-related integration scenarios.
-TentacleOnly Switch False Runs Server scenarios 14 and 15 to install and configure an Octopus Deploy server instance, then moves on to Tentacle-related tests (which require a server to be present).
-OctopusVersion String vLatest Allows you to run tests against a specific version of Octopus Deploy. Does not apply to 'Scenario_07', which installs an older version in order to test upgrading.
-RetainOnDestroy Switch False Retains the virtual machine after the tests finish, so you can examine the state of the VM.
-debug Switch False Adds the --debug flag to the vagrant invocation, allowing you to step through the process and examine machine state before moving on.

Tests are written in ServerSpec, which is an infrastructure oriented layer over RSpec and use our octopus-serverspec-extensions project for octopus-specific tests.

When creating a PR, please ensure that all existing tests run succesfully against VirtualBox, and please include a new scenario where possible. Before you start, please raise an issue to discuss your plans so we can make sure it fits with the goals of the project.