- Raspberry Pi Zero with GPIO header - additionally required: Waveshare Ethernet/USB HUB HAT for Raspberry Pi
- Raspberry Pi (it doesn't matter which one; Raspberry Pi 3 or Raspberry Pi 4 are quite current devices) and the RAM size doesn't matter
- Windows or Linux computers
- possibly via your own node - Node OS (Ciatdel) unfortunately does not recognize the USB miner. Maybe someone will get it for themselves. Raspiblitz works without any problems and is mainly covered on the following pages.
- overclocked to around 100 GH/s
- the Gekko Newpac USB Miner is no longer produced and is only available to a limited extent on the page linked above (approx. 70 pieces; as of June 2022)
- Another miner such as the successor to Newpac can also be ordered:
- overclocked to around 400 GH/s
- This is expected to be available again from the end of July 2022
- Bitshopper: 7-port USB hub with 6-pin PCIe connection (Reference if several USB miners should be operated)
- Amazon: RSHTECH Aluminum USB Hub Active 3.0 with 36W (12V / 3A)
- Amazon: [USB Hub Active 3.0 with 24W (12V/2A) power supply, USB 3.0 Hub Active with 5 ports (USB 3.0 data port x 4, fast charging port x 1) with independent on/off switch and LED, gray](https: //amzn.eu/d/9QPdNLB)
- absolutely necessary from a clock frequency of 100 MHz! The Compac F Miner must always be used with cooling!
- Amazon: ARCTIC Breeze Mobile - 92 mm USB fan with flexible neck
- Enclosure for 3D printing: Thingiverse - PLA, PETG,... (attached with cable ties)
- Housing for 3D printing: Thingiverse - use PETG or similar! PLA softens more quickly and could slip off!
- if necessary [larger fans for cases](https://www.digitalo.de/products/1120184/BeQuiet-Pure-Wings-2-PWM-PC-Gehaeuse-Luefter-Schwarz-B-x-H-x-D-120-x-120 -x-25mm.html)
- if necessary fan control
- LAN cable if necessary
- If necessary, power supply for Raspberry (can also be powered via USB hub)
- SD card if necessary (at least 8 GB recommended)
- if necessary compact housing
- if necessary power supply for case
- if necessary adapter cable
- if necessary infrared thermometer
- if necessary USB voltage tester ammeter measuring device 5.1A 30V