We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
6,0,0,-;Booting Linux on physical CPU 0x0 5,1,0,-;Linux version 4.9.37 (runner@fv-az532-837) (buildroot-gcc-13.2.0) #1 Thu Nov 14 10:18:59 UTC 2024 6,2,0,-;CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d 6,3,0,-;CPU: div instructions available: patching division code 6,4,0,-;CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache 6,5,0,-;OF: fdt:Machine model: Hisilicon HI3516EV200 DEMO Board 6,6,0,-;cmz zone is not set! 6,7,0,-;Memory policy: Data cache writeback 7,8,0,-;On node 0 totalpages: 8192 7,9,0,-;free_area_init_node: node 0, pgdat c0508b58, node_mem_map c1fbb000 7,10,0,-; Normal zone: 64 pages used for memmap 7,11,0,-; Normal zone: 0 pages reserved 7,12,0,-; Normal zone: 8192 pages, LIFO batch:0 6,13,0,-;CPU: All CPU(s) started in SVC mode. 7,14,0,-;pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 7,15,0,-;pcpu-alloc: [0] 0 6,16,0,-;Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 5,17,0,-;Kernel command line: mem=32M console=ttyAMA0,115200 panic=20 rootfstype=squashfs root=/dev/mtdblock3 init=/init mtdparts=hi_sfc:256k(boot),64k(wtf),2048k(kernel),5120k(rootfs),-(rootfs_data) mmz_allocator=hisi 6,18,0,-;PID hash table entries: 128 (order: -3, 512 bytes) 6,19,0,-;Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) 6,20,0,-;Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) 6,21,0,-;Memory: 27044K/32768K available (3857K kernel code, 148K rwdata, 916K rodata, 196K init, 181K bss, 5724K reserved, 0K cma-reserved) 5,22,0,-;Virtual kernel memory layout:\x0a vector : 0xffff0000 - 0xffff1000 ( 4 kB)\x0a fixmap : 0xffc00000 - 0xfff00000 (3072 kB)\x0a vmalloc : 0xc2800000 - 0xff800000 ( 976 MB)\x0a lowmem : 0xc0000000 - 0xc2000000 ( 32 MB)\x0a modules : 0xbf000000 - 0xc0000000 ( 16 MB)\x0a .text : 0xc0008000 - 0xc03cc848 (3859 kB)\x0a .init : 0xc04b3000 - 0xc04e4000 ( 196 kB)\x0a .data : 0xc04e4000 - 0xc0509360 ( 149 kB)\x0a .bss : 0xc050b000 - 0xc05384a8 ( 182 kB) 6,23,0,-;SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 6,24,0,-;NR_IRQS:16 nr_irqs:16 16 3,25,0,-;Gic dist init... 6,26,0,-;arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys). 6,27,0,-;clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns 6,28,8,-;sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns 6,29,16,-;Switching to timer-based delay loop, resolution 20ns 6,30,136,-;clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns 6,31,394,-;Console: colour dummy device 80x30 6,32,415,-;Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000) 6,33,426,-;pid_max: default: 32768 minimum: 301 6,34,517,-;Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 6,35,525,-;Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 6,36,1062,-;CPU: Testing write buffer coherency: ok 6,37,1324,-;Setting up static identity map for 0x40008200 - 0x40008258 6,38,2326,-;devtmpfs: initialized 6,39,6163,-;VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 6,40,6423,-;clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 6,41,6443,-;futex hash table entries: 256 (order: -1, 3072 bytes) 6,42,6507,-;pinctrl core: initialized pinctrl subsystem 6,43,6893,-;NET: Registered protocol family 16 6,44,7277,-;DMA: preallocated 256 KiB pool for atomic coherent allocations 6,45,8499,-;Serial: AMBA PL011 UART driver 6,46,10496,-;12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 21, base_baud = 0) is a PL011 rev2 6,47,272690,-;console [ttyAMA0] enabled 6,48,275929,-;12041000.uart: ttyAMA1 at MMIO 0x12041000 (irq = 22, base_baud = 0) is a PL011 rev2 6,49,308178,-;ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022 SUBSYSTEM=amba DEVICE=+amba:12070000.spi 6,50,313922,-;ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c286b000 SUBSYSTEM=amba DEVICE=+amba:12070000.spi 6,51,321114,-;ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022 SUBSYSTEM=amba DEVICE=+amba:12071000.spi 6,52,326870,-;ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c286f000 SUBSYSTEM=amba DEVICE=+amba:12071000.spi 6,53,334703,-;usbcore: registered new interface driver usbfs 6,54,339024,-;usbcore: registered new interface driver hub 6,55,343086,-;usbcore: registered new device driver usb 6,56,347793,-;clocksource: Switched to clocksource arch_sys_counter 6,57,378951,-;NET: Registered protocol family 2 6,58,382696,-;TCP established hash table entries: 1024 (order: 0, 4096 bytes) 6,59,388413,-;TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 6,60,393465,-;TCP: Hash tables configured (established 1024 bind 1024) 6,61,398588,-;UDP hash table entries: 256 (order: 0, 4096 bytes) 6,62,403122,-;UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 6,63,408233,-;NET: Registered protocol family 1 6,64,412129,-;RPC: Registered named UNIX socket transport module. 6,65,416745,-;RPC: Registered udp transport module. 6,66,420174,-;RPC: Registered tcp transport module. 6,67,423565,-;RPC: Registered tcp NFSv4.1 backchannel transport module. 6,68,430446,-;workingset: timestamp_bits=30 max_order=13 bucket_order=0 6,69,444487,-;squashfs: version 4.0 (2009/01/31) Phillip Lougher 6,70,453470,-;jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc. 7,71,460733,-;yaffs: yaffs Installing. 6,72,462315,-;Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) 6,73,468452,-;io scheduler noop registered 6,74,471063,-;io scheduler deadline registered (default) 6,75,477348,-;pl061_gpio 120b0000.gpio_chip: PL061 GPIO chip @0x120b0000 registered SUBSYSTEM=amba DEVICE=+amba:120b0000.gpio_chip 6,76,484831,-;pl061_gpio 120b1000.gpio_chip: PL061 GPIO chip @0x120b1000 registered SUBSYSTEM=amba DEVICE=+amba:120b1000.gpio_chip 6,77,492360,-;pl061_gpio 120b2000.gpio_chip: PL061 GPIO chip @0x120b2000 registered SUBSYSTEM=amba DEVICE=+amba:120b2000.gpio_chip 6,78,499845,-;pl061_gpio 120b4000.gpio_chip: PL061 GPIO chip @0x120b4000 registered SUBSYSTEM=amba DEVICE=+amba:120b4000.gpio_chip 6,79,507276,-;pl061_gpio 120b5000.gpio_chip: PL061 GPIO chip @0x120b5000 registered SUBSYSTEM=amba DEVICE=+amba:120b5000.gpio_chip 6,80,514772,-;pl061_gpio 120b6000.gpio_chip: PL061 GPIO chip @0x120b6000 registered SUBSYSTEM=amba DEVICE=+amba:120b6000.gpio_chip 6,81,522295,-;pl061_gpio 120b7000.gpio_chip: PL061 GPIO chip @0x120b7000 registered SUBSYSTEM=amba DEVICE=+amba:120b7000.gpio_chip 6,82,529810,-;pl061_gpio 120b8000.gpio_chip: PL061 GPIO chip @0x120b8000 registered SUBSYSTEM=amba DEVICE=+amba:120b8000.gpio_chip 6,83,556300,-;brd: module loaded 6,84,568143,-;loop: module loaded 6,85,571160,-;hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2 SUBSYSTEM=platform DEVICE=+platform:hisi_spi_nor.0 6,86,575983,-;hisi-sfc hisi_spi_nor.0: Force global unlock SUBSYSTEM=platform DEVICE=+platform:hisi_spi_nor.0 6,87,580051,-;hisi-sfc hisi_spi_nor.0: SR1:[02]->[00] SUBSYSTEM=platform DEVICE=+platform:hisi_spi_nor.0 4,88,583728,-;hisi-sfc hisi_spi_nor.0: all blocks are unlocked. SUBSYSTEM=platform DEVICE=+platform:hisi_spi_nor.0 3,89,588175,-;@spi_nor_scan(), no "m25p,fast-read". 3,90,591565,-;@spi_nor_scan(), modes->rd_modes:0xd. 6,91,594974,-;hisi-sfc hisi_spi_nor.0: SR1 [00], SR2 [00], SR3 [00] SUBSYSTEM=platform DEVICE=+platform:hisi_spi_nor.0 6,92,599771,-;hisi-sfc hisi_spi_nor.0: (Fast) Read: opcode=BBh, protocol=122, mode=0, wait=8 SUBSYSTEM=platform DEVICE=+platform:hisi_spi_nor.0 6,93,606812,-;hisi-sfc hisi_spi_nor.0: nor->read_opcode[3: Read; 0B: Fast Read; 3B: Dual; BB: Dual IO; 6B: Quad; EB: Quad IO]: 0xbb. SUBSYSTEM=platform DEVICE=+platform:hisi_spi_nor.0 6,94,617246,-;hisi-sfc hisi_spi_nor.0: xm_xt25f64b-s (Chipsize 8 Mbytes, Blocksize 64KiB) SUBSYSTEM=platform DEVICE=+platform:hisi_spi_nor.0 5,95,623963,-;5 cmdlinepart partitions found on MTD device hi_sfc 5,96,628584,-;5 cmdlinepart partitions found on MTD device hi_sfc 5,97,633189,-;Creating 5 MTD partitions on "hi_sfc": 5,98,636674,-;0x000000000000-0x000000040000 : "boot" 5,99,642725,-;0x000000040000-0x000000050000 : "wtf" 5,100,648014,-;0x000000050000-0x000000250000 : "kernel" 5,101,653475,-;0x000000250000-0x000000750000 : "rootfs" 5,102,659022,-;0x000000750000-0x000000800000 : "rootfs_data" 6,103,665233,-;SPI Nand ID Table Version 2.7 3,104,669000,-;Cannot found a valid SPI Nand Device 6,105,672316,-;hisi_spi_nand_probe(175): Error: driver probe, result: -19 6,106,733140,-;FEPHY:addr=1, la_am=0xc, ldo_am=0x5, r_tuning=0x1c 6,107,737862,-;libphy: hisi_femac_mii_bus: probed 6,108,742025,-;libphy: Fixed MDIO Bus: probed 6,109,884372,-;Generic PHY 10041100.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=10041100.mdio:01, irq=-1) SUBSYSTEM=mdio_bus DEVICE=+mdio_bus:10041100.mdio:01 3,110,893859,-;phy_id=0x20669903, phy_mode=mii 4,111,896749,-;hisi-femac 10040000.ethernet: using random MAC address 6e:b7:2c:bc:eb:2d SUBSYSTEM=platform DEVICE=+platform:10040000.ethernet 6,112,908654,-;xhci-hcd xhci-hcd.0.auto: xHCI Host Controller SUBSYSTEM=platform DEVICE=+platform:xhci-hcd.0.auto 6,113,912878,-;xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 SUBSYSTEM=platform DEVICE=+platform:xhci-hcd.0.auto 6,114,919489,-;xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010010 SUBSYSTEM=platform DEVICE=+platform:xhci-hcd.0.auto 6,115,926924,-;xhci-hcd xhci-hcd.0.auto: irq 115, io mem 0x10030000 SUBSYSTEM=platform DEVICE=+platform:xhci-hcd.0.auto 6,116,933496,-;hub 1-0:1.0: USB hub found SUBSYSTEM=usb DEVICE=+usb:1-0:1.0 6,117,936221,-;hub 1-0:1.0: 1 port detected SUBSYSTEM=usb DEVICE=+usb:1-0:1.0 6,118,939380,-;xhci-hcd xhci-hcd.0.auto: xHCI Host Controller SUBSYSTEM=platform DEVICE=+platform:xhci-hcd.0.auto 6,119,943581,-;xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 SUBSYSTEM=platform DEVICE=+platform:xhci-hcd.0.auto 6,120,950039,-;usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. SUBSYSTEM=usb DEVICE=+usb:usb2 6,121,957916,-;hub 2-0:1.0: USB hub found SUBSYSTEM=usb DEVICE=+usb:2-0:1.0 6,122,960640,-;hub 2-0:1.0: hub can't support USB3.0 SUBSYSTEM=usb DEVICE=+usb:2-0:1.0 6,123,1158122,-;hibvt_rtc 120e0000.rtc: rtc core: registered 120e0000.rtc as rtc0 SUBSYSTEM=platform DEVICE=+platform:120e0000.rtc 6,124,1163999,-;hibvt_rtc 120e0000.rtc: RTC driver for hibvt enabled SUBSYSTEM=platform DEVICE=+platform:120e0000.rtc 6,125,1168847,-;i2c /dev entries driver 6,126,1172060,-;hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered SUBSYSTEM=platform DEVICE=+platform:12060000.i2c 6,127,1177834,-;hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered SUBSYSTEM=platform DEVICE=+platform:12061000.i2c 6,128,1183540,-;hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered SUBSYSTEM=platform DEVICE=+platform:12062000.i2c 6,129,1189131,-;sdhci: Secure Digital Host Controller Interface driver 6,130,1194006,-;sdhci: Copyright(c) Pierre Ossman 6,131,1197048,-;sdhci-pltfm: SDHCI platform and OF driver helper 6,132,1257806,-;mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode 6,133,1265681,-;ip_tables: (C) 2000-2006 Netfilter Core Team 6,134,1270385,-;NET: Registered protocol family 10 6,135,1279698,-;NET: Registered protocol family 17 6,136,1282895,-;bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 3,137,1508291,-;hibvt_rtc 120e0000.rtc: hctosys: unable to read the hardware clock SUBSYSTEM=platform DEVICE=+platform:120e0000.rtc 6,138,1523947,-;VFS: Mounted root (squashfs filesystem) readonly on device 31:3. 6,139,1542930,-;devtmpfs: mounted 6,140,1544852,-;Freeing unused kernel memory: 196K (c04b3000 - c04e4000) 4,141,1549932,-;This architecture does not have kernel memory protection. 3,142,2642407,-;random: crng init done 6,143,3289802,-;IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 4,144,3571033,-;open_sys_config: loading out-of-tree module taints kernel. 0,145,3571754,-;==== online_flag=0, cmos_yuv_flag=0, sensor=imx307, chip=hi3516ev200, board=demo==== 0,146,3571760,-;==== g_quick_start_flag=0 ==== 0,147,3571763,-;sysconfig init success! 0,148,3620579,-;Module media: init ok 6,149,3620588,-;Media Memory Zone Manager 0,150,3620956,-;osal 1.0 init success! 0,151,3730180,-;load sys.ko for Hi3516EV200...OK! 0,152,3785263,-;load region.ko for Hi3516EV200...OK! 0,153,3855316,-;load vgs.ko for Hi3516EV200...OK! 0,154,4006317,-;load vi.ko for Hi3516EV200...OK ! 4,155,4081520,-;hi3516ev200_isp: module license 'Proprietary' taints kernel. 4,156,4081530,-;Disabling lock debugging due to kernel taint 0,157,4084757,-;ISP Mod init! 0,158,4226985,-;load vpss.ko for Hi3516EV200...OK! 0,159,4243807,-;load chnl.ko for Hi3516EV200...OK! 0,160,4262710,-;load vedu.ko for Hi3516EV200...OK! 0,161,4317890,-;load rc.ko for Hi3516EV200...OK! 0,162,4411895,-;load venc.ko for Hi3516EV200...OK! 0,163,4479421,-;load h264e.ko for Hi3516EV200...OK! 0,164,4551150,-;load h265e.ko for Hi3516EV200...OK! 0,165,4593199,-;load jpege.ko for Hi3516EV200...OK! 0,166,4674714,-;load ive.ko for Hi3516EV200...OK! 0,167,4755526,-;Load sensor_spi.ko OK ! 0,168,4995342,-;load mipi_rx driver successful! 0,169,5024659,-;register dev 0,170,5031705,-;Watchdog Timer: 0.01 initialized. default_margin=60 sec (nodeamon= 0) 0,171,5031716,-;wtdg init ok. ver=Nov 14 2024, 10:19:39. 6,172,5407918,-;hisi-femac 10040000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx SUBSYSTEM=platform DEVICE=+platform:10040000.ethernet 6,173,5407958,-;IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
motion.sh is not executed even though majestic logs says it it. Script is correct and when executed manually I see no problems.
motion sh has chmod 0777.
cat of /usr/sbin/motion.sh
#!/bin/sh curl -k -X POST "http://192.168.0.7:8094/" -H "Content-Type: application/text" -d "172.21.10.3:motion:true"
Majestic log:
Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 3 regions, 1336x580 -> [1800x752] Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: 1336,580 32,50 Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: 1432,620 48,34 Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 2 regions, 1336x580 -> [1480x654] Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: 1336,572 80,66 Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x572 -> [1416x638] Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: 1336,572 72,58 Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x572 -> [1408x630] Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: 1336,580 32,50 Nov 14 20:02:16 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x580 -> [1368x630] Nov 14 20:02:17 openipc-hi3516ev200 user.info majestic[803]: 1336,588 24,42 Nov 14 20:02:17 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x588 -> [1360x630] Nov 14 20:02:17 openipc-hi3516ev200 user.info majestic[803]: 1336,580 32,50 Nov 14 20:02:17 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x580 -> [1368x630] Nov 14 20:02:17 openipc-hi3516ev200 user.info majestic[803]: 1336,580 32,50 Nov 14 20:02:17 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x580 -> [1368x630] Nov 14 20:02:18 openipc-hi3516ev200 user.info majestic[803]: 1336,580 24,50 Nov 14 20:02:18 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x580 -> [1360x630] Nov 14 20:02:18 openipc-hi3516ev200 user.debug majestic[803]: Execute: /usr/sbin/motion.sh Nov 14 20:02:18 openipc-hi3516ev200 user.info majestic[803]: 1336,580 32,50 Nov 14 20:02:18 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x580 -> [1368x630] Nov 14 20:02:18 openipc-hi3516ev200 user.info majestic[803]: 1336,580 32,50 Nov 14 20:02:18 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x580 -> [1368x630] Nov 14 20:02:19 openipc-hi3516ev200 user.info majestic[803]: 1336,588 24,42 Nov 14 20:02:19 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x588 -> [1360x630] Nov 14 20:02:23 openipc-hi3516ev200 user.info majestic[803]: 1336,588 24,42 Nov 14 20:02:23 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1336x588 -> [1360x630] Nov 14 20:02:23 openipc-hi3516ev200 user.debug majestic[803]: Execute: /usr/sbin/motion.sh Nov 14 20:02:24 openipc-hi3516ev200 user.info majestic[803]: 1400,604 416,148 Nov 14 20:02:24 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1400x604 -> [1816x752] Nov 14 20:02:24 openipc-hi3516ev200 user.info majestic[803]: 1400,604 408,148 Nov 14 20:02:24 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1400x604 -> [1808x752] Nov 14 20:02:24 openipc-hi3516ev200 user.info majestic[803]: 1400,612 88,108 Nov 14 20:02:24 openipc-hi3516ev200 user.info majestic[803]: 1560,694 240,50 Nov 14 20:02:24 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 2 regions, 1400x612 -> [1800x744] Nov 14 20:02:24 openipc-hi3516ev200 user.info majestic[803]: 1400,620 80,82 Nov 14 20:02:24 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1400x620 -> [1480x702] Nov 14 20:02:25 openipc-hi3516ev200 user.info majestic[803]: 1424,620 56,34 Nov 14 20:02:25 openipc-hi3516ev200 user.info majestic[803]: Motion detected in 1 regions, 1424x620 -> [1480x654]
Part of majestic.yaml
motionDetect: enabled: true visualize: true debug: true roi: 71x129x1586x755
cat /etc/majestic.yaml
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Required information
Issue description
motion.sh is not executed even though majestic logs says it it. Script is correct and when executed manually I see no problems.
motion sh has chmod 0777.
cat of /usr/sbin/motion.sh
Information to attach
Majestic log:
Part of majestic.yaml
cat /etc/majestic.yaml)The text was updated successfully, but these errors were encountered: