This document describes the best practices for reviewing and troubleshooting Azure Resource Manager (ARM) Templates, both bicep and JSON, including Azure Applications for the Azure Marketplace. This document is intended to help you design effective templates or troubleshoot existing templates for getting applications certified for the Azure Marketplace and Azure QuickStart templates.
This repository contains all currently available Azure Resource Manager templates contributed by the community. A searchable template index is maintained at https://azure.microsoft.com/documentation/templates/.
To contribute a sample to this repo, you must read and follow these best practices as well as the guidelines listed in the Contribution guide.
This section describes guidelines and best practices for clear and accurate templates. Some of these guidelines are suggestions for consistency and accuracy, however, others are required for publishing your templates on Azure. These requirements are called out when applicable.
Ensure that your code is properly formatted. For working with Azure Resource Manager Templates, Visual Studio Code is a free editor that has an extension for bicep and JSON designed to help author templates.
An Azure Application or QuickStart sample must contain, at a minimum, the following files:
| Artifact | Azure Marketplace file | Azure QuickStarts file |
|---|---|---|
| UI Definition File | createUiDefinition.json | [optional] |
| Template File | mainTemplate.json | main.bicep or azuredeploy.json |
| Parameters File (Public) | n/a | azuredeploy.parameters.json |
| Parameters File (US Gov) | n/a | azuredeploy.parameters.us.json |
| Read Me File | Not required | README.md |
| QuickStart Metadata | n/a | metadata.json |
| Nested templates | In a nestedtemplates subfolder | In a nestedtemplates subfolder for JSON or a modules folder for bicep |
| Configuration Scripts | In a scripts subfolder | In a scripts subfolder |
Parameters should be used for collecting input to customize the deployment. Avoid adding too many parameters to a template as each parameter creates more opportunity for errors. Additionally, many properties values can be intuitively assigned by using relationships between resources or understanding the nature of the workload. For example the name of a virtualMachine may be determined by it's role in a workload. The networkInterfaces assigned to the VM can be prefixed with the name of the VM.
Some examples of property values that should be parameterized, unless otherwise noted defaultValues may be used to recommend or simplify the deployment.
- credentials - usernames, passwords, secrets should always be parameterized and never use defaultValues
- endpoints or prefixes, particularly any endpoint consumed by humans (as opposed to automation)
- SKUs or sizes that affect availability in a cloud or region and the cost and performance of a workload
- resource locations except for samples that contain resources that do not require a location - multiple location parameters may be used where appropriate
Other requirements for parameters:
- All parameters should have a description (see sample below)
- Use constraints where possible, allowed values, min/max
- Templates must have a parameter named
locationfor the primary location of resources.- The default value of this parameter must be
[resourceGroup().location] - The location parameter must not contain
allowedValues, as these will not be applicable to all clouds
- The default value of this parameter must be
- For resources that are not available in all locations, use a separate parameter for the location of these resources.
- Use additional location parameters for applications that are multi-region and selected by the user.
- Do NOT use allowedValues for list of things that are meant to be inclusive (e.g. all VM SKUs) only for exclusive scenarios. Over using allowedValues will block deployment in some scenarios and create a maintenance issue when the inclusion list changes.
- Use defaultValues whenever possible – this creates a simpler and flexible deployment experience. Default values are not required for modules or nested templates.
- Any
defaultValuesupplied for a parameter must be valid for all users in the default deployment configuration.- Do not provide default values for user names, passwords (or any secure parameter) or anything that will increase the attack surface area of the application
- Template expressions can be used to create default values, as shown in the following example:
@description('Name of the storageAccount')
param storageAccountName string = 'storage${uniqueString(resourceGroup().id)}'
@description('Number of VMs')
@min(2)
@max(8)
param vmCount int = 2 "storageAccountName": {
"type": "string",
"defaultValue": "[concat('storage', uniqueString(resourceGroup().id))]",
"metadata": {
"description": "Name of the storage account"
}
},
"vmCount": {
"type": "int",
"defaultValue": 2,
"minValue": 2,
"maxValue": 8,
"metadata": {
"description": "Name of the storage account"
}
}- Use variables for values that are used multiple times throughout a template or for creating complex expressions.
- Variables must not be used for apiVersions. The apiVersion affects the shape of the resource and often cannot be updated without updating all the resources that use a particular version.
- Use a loop for creating repeating patterns in variables.
- Remove all unused variables from all templates.
- Avoid concatenating variable names for conditional scenarios – use template language expressions and dictionary objects. For more information, see https://docs.microsoft.com/azure/azure-resource-manager/resource-group-template-functions
Parameters and variables should be named according to their use on specific properties where applicable. For example a parameter used for the name property on a storageAccount would be named storageAccountName rather than simple name or storageAccount. A parameter used for the size of a VM should be vmSize rather than size. As well, parameters, variables and outputs that related to a specific resource should use the resource's symbolic name a a prefix.
camelCase should be used for naming of symbols (parameters, variables, resources, outputs, etc.).
All resources share a common set of properties and as such these guidelines will apply to all resources in an application.
Although, not required by the platform, a consistent sort order of properties and elements in a template creates the ideal experience for reasoning over templates in the Azure ecosystem. For example, parameters define the input contract for a deployment and should be at the top of the template. Outputs are the outgoing contract and should be collected at the end of a file. Additionally, it is easier to find an element when templates are authored using a consistent pattern.
Top-level template properties must be in the following order:
targetScope '...'
metadata '...'
param '...'
var '...'
resource // (existing resources collected together)
resource/module // (new resources)
output '...'{
"$schema": "https://schema.management.azure.com/schemas/2019-04-01/...",
"contentVersion": "1.0.0.0",
"apiProfile": "...",
"parameters": {},
"functions": {},
"variables": {},
"resources": [],
"outputs": {},
}It is recommended that the resources be sorted by deployment order (as applicable) to convey the intent of the orchestration.
Within resources, the common properties should be authored consistently to provide for understandability and consumption of the code.
Note: Any other properties not listed here should be placed before the properties object for the resource.
@description
@batchSize
resource foo
parent
scope
name
location/extendedLocation
zones
sku
kind
scale
plan
identity
dependsOn
tags
properties"resources": [
{
"comments": "if any",
"condition": true,
"scope": "% parent scope %",
"type": "Microsoft.Compute/virtualMachines",
"apiVersion": "2017-12-01",
"name": "[concat(parameters('virtualMachineName'), copyIndex(1))]",
"location": "[parameters('location')]",
"zones": [],
"sku": {},
"kind": "",
"scale": "",
"plan": {},
"identity": {},
"copy": {
"name": "vmLoop",
"count": "[parameters('numberOfVMs')]"
},
"dependsOn": [
"nicLoop"
],
"tags": {},
"properties": {}
}
]All empty or null properties that are not required should be excluded from the template samples. This includes empty objects {}, arrays [], strings "", and any property that has a null value. The exceptions to this rule are the top-level JSON template properties: parameters, variables, functions, resources and outputs.
Deployment sequence dependencies can be specified by using the dependsOn property. Dependencies are only allowed for resources that are deployed within the same template. They are not needed for existing resources, and for nested deployments or modules, the dependency is created on the deployment resource or module itself. The value of a dependency in JSON is simply the name of a resource or copy loop. In bicep it is the symbolic reference to the resource.
dependsOn: [
storageAccount
] "dependsOn": [
"nicLoop",
"[parameters('sqlServerName')]"
],A full resourceId can also be used for the dependency in JSON but is only necessary when two or more resources share the same name (which should be avoided).
Conditional resources are automatically removed from the dependency graph when not deployed. Authoring these dependencies can be done as if the resource will always be deployed.
Resource IDs must use the symbolic reference e.g. storageAccount.id when possible otherwise the resourceId() must be used. The following code shows an example:
properties: {
subnet: {
id: subnet.id
}
} "properties": {
"subnet": {
"id": "[resourceId(parameters('virtualNetworkResourceGroupName'), 'Microsoft.Network/virtualNetworks/subnets/', parameters('virtualNetworkName'), parameters('subnetName'))]"
}
}Any reference to a property of a resource must be done using the reference() function in JSON. In bicep, resource properties may be referenced using the property name on the symbolic name of the resource, e.g. managedIdentity.properties.principalId. Hard-coding values may cause failures when templates are used in other subscriptions, tenants or clouds, or when changes are made in the original cloud. Environment properties, such as service endpoints can be retrieved using the environment() function.
Some examples:
- Endpoints or URIs for an Azure resource (storage, web, publicIp)
- Virtual Network IP address information for subnets, load balancers, or gateways
- Account keys
- Public endpoints, such as a blob storage public endpoint, should use
reference()or a symbolic reference to retrieve the namespace dynamically. - Disks used for virtual machines (VMs) should use managed disks for the OS and data disks. For boot diagnostics, the
storageUrimust be retrieved using a reference. The following example shows how to use the reference function for thestorageUri.
diagnosticsProfile: {
bootDiagnostics: {
enabled: true,
storageUri: diagStorageAccount.properties.primaryEndpoints['blob']
}
}
```json
"diagnosticsProfile": {
"bootDiagnostics": {
"enabled": true,
"storageUri": "[reference(variables('diagStorageAccountName'), '2017-10-01').primaryEndpoints['blob']]"
}
}- To reference an existing resource (or one not defined in the same template), a full
resourceIdmust be supplied to thereference()function:
"diagnosticsProfile": {
"bootDiagnostics": {
"enabled": true,
"storageUri": "[reference(resourceId(parameters('storageAccountResourceGroup'), 'Microsoft.Storage/storageAccounts', variables('diagStorageAccountName')), '2017-10-01').primaryEndpoints['blob']]"
}
}-
Other values in a template configured with a public endpoint, must use the reference function.
-
All resources should use the
parameters('location')expression for thelocationproperty for all resources. Other expressions may be used for resources that need to be placed in alternate locations, for example a geo-redundant application. Location values should not be hard-coded or useresourceGroup().locationdirectly for the location property. Required parameter definition:
@description('Location for all resources')
param location string = resourceGroup().location "location": {
"type": "string",
"defaultValue": "[resourceGroup().location]",
"metadata": {
"description": "Location for all resources."
}
}- A literal value must not be used for all or part of an endpoint, for example, the following is never allowed:
hostNames: [
'${webJobName}.azurewebsites.net'
]"hostNames": [
"[concat(parameters('webjobName'),'.azurewebsites.net')]"
],Rather. the environment() function should be used to retrieve the endpoint information. If the endpoint information is not provided in the environment() function, a parameter should be used to provide the value.
Deployment artifacts are any files, in addition to the mainTemplate.json/azuredeploy.json/main.bicep and createUIDefinition.json files that are needed to complete a deployment. For example, JSON nested templates, configuration scripts or zip files. The following guidelines should be used when creating a solution with deployment artifacts:
- mainTemplate.json/azuredeploy.json/main.bicep and createUIDefinition.json must be in the root of the folder.
- Additional artifacts should also be stored in subfolders.
- Additional templates should be stored in the nestedtemplates folder for JSON or the modules folder for bicep.
- Scripts should be stored in the scripts folder.
- You do not have to use the folder names prescribed above, if a more appropriate or descriptive name is appropriate. Just don't put everything in the root.
NOTE: if your application uses the CustomScript extension for Windows – place configuration scripts and other artifacts in the / (root) folder rather than the /scripts subfolder.
When samples contain scripts, templates or other artifacts that need to be made available during deployment, you will need to stage those artifacts to enable a consistent deployment experience throughout the development and test lifecycle, including command line deployment with the scripts provided at the root of the repository.
To do this you must define two standard parameters:
- _artifactsLocation - The base URI where all artifacts for the deployment will be staged. The
defaultValuemust be specified as shown below and include a trailing slash when providing a value for the parameter. - _artifactsLocationSasToken - The sasToken required to access _artifactsLocation. The default value should be an empty string "" for scenarios where the
_artifactsLocationis not secured, such as the raw GitHub URI for a public repo. The following code shows an example:
@description('The base URI where artifacts required by this template are located including a trailing \'/\'')
param _artifactsLocation string = deployment().properties.templateLink.uri
@secure
@description('The sasToken required to access _artifactsLocation. When the template is deployed using the accompanying scripts, a sasToken will be automatically generated. Use the defaultValue if the staging location is not secured.')
param _artifactsLocationSasToken string = ''"parameters": {
"_artifactsLocation": {
"type": "string",
"metadata": {
"description": "The base URI where artifacts required by this template are located including a trailing '/'"
},
"defaultValue": "[deployment().properties.templateLink.uri]"
},
"_artifactsLocationSasToken": {
"type": "securestring",
"metadata": {
"description": "The sasToken required to access _artifactsLocation. When the template is deployed using the accompanying scripts, a sasToken will be automatically generated. Use the defaultValue if the staging location is not secured."
},
"defaultValue": ""
}
},After the parameters are added to the template all URIs must be created using the uri() function.
var scriptFileUri = uri(_artifactsLocation, 'scripts/configuration.sh${_artifactsLocationSasToken}')"variables": {
"scriptFileUri": "[uri(parameters('_artifactsLocation'), concat('scripts/configuration.sh', parameters('_artifactsLocationSasToken')))]",
"nestedtemplateUri": "[uri(parameters('_artifactsLocation'), concat('nestedtemplates/jumpbox.json', parameters('_artifactsLocationSasToken')))]"
},- All
imageReferenceobjects for virtual machines or virtual machine scale sets must use images that are available in the Azure Marketplace, or core platform images. Custom images cannot be used. - An imageReference using an image from the Azure Marketplace cannot be a preview or staged version of the image in production deployments.
- An imageReference using an image from the Azure Marketplace must also include information about the image in the plan properties of the virtual machine object.
The following code provides an example:
resource windowsVM 'Microsoft.Compute/virtualMachines@2020-12-01' = {
name: 'name'
location: location
plan: {
name: 'ContosoSKU'
publisher: 'Contoso'
product: 'ContosoProduct'
}
properties: {
storageProfile: {
imageReference: {
publisher: 'Contoso'
offer: 'ContosoProduct'
sku: 'ContosoSKU'
version: 'latest'
}
}
...
}
{
"apiVersion": "2017-12-01",
"type": "Microsoft.Compute/virtualMachines",
"name": "[parameters('vmName')]",
"location": "[parameters('location')]",
"plan": {
"name": "ContosoSKU",
"publisher":"Contoso",
"product":"ContosoProduct"
},
"properties": {
"storageProfile": {
"imageReference": {
"publisher": "Contoso",
"offer": "ContosoProduct",
"sku": "ContosoSKU",
"version": "latest"
}
...
}
...
}
}- If a template contains an
imageReferenceusing an platform image, theversionproperty must belatest. The following code shows an example.
- OS Disks and Data Disks must use implicit managed disks except for QuickStart samples showing the use of explicit disks. An explicit disk is a disk where the resource is explicitly defined in the template.
osDisk: {
name: 'nameIsOptional'
caching: 'ReadWrite'
createOption: 'FromImage'
}
dataDisks: [
{
name: 'optional'
diskSizeGB: sizeOfDiskInGB
lun: 0
createOption: 'Empty'
}
] "osDisk": {
"caching": "ReadWrite",
"createOption": "FromImage"
},
"dataDisks": [
{
"name": "datadisk1",
"diskSizeGB": "[variables('sizeOfDiskInGB')]",
"lun": 0,
"createOption": "Empty"
}
]Outputs are recommended for any information that will enable easy use of a sample, for example endpoints, ip addresses, etc. Secrets (passwords, account keys) should never be used in an output as the outputs from a deployment may available to users with read-only access.