Skip to content

Latest commit

 

History

History
59 lines (32 loc) · 3.06 KB

manual-winusb-install.md

File metadata and controls

59 lines (32 loc) · 3.06 KB
Raw

Manual WinUSB Install Instructions

RB4InstrumentMapper is capable of installing the WinUSB driver on Xbox One devices directly, through the Configure Devices button on its main menu. However, if you run into any issues, it is possible to install the driver manually as an alternative.

Warning

DO NOT INSTALL THE DRIVER ON YOUR XBOX ONE RECEIVER!!!

Xbox One receiver; original on left, revision on right.

RB4InstrumentMapper is not capable of handling it in this state, and it will become nonfunctional until you uninstall the device in Device Manager!

The driver should only be installed on the Wireless Legacy Adapter and Guitar Hero Live dongle.

Install WinUSB

  1. Download Zadig and run it.

  2. Under Options, enable List All Devices.

    Zadig "List All Devices" button

  3. Select your device from the dropdown list.

    Zadig device selection

  4. Change the box to the right of the green/orange arrow to the WinUSB driver.

    Zadig driver selection

  5. Hit Replace Driver and wait for it to finish.

  6. Repeat for any additional peripherals you wish to use.

You can now use the device in RB4InstrumentMapper. Note that games that natively support the device will no longer work directly with it until you uninstall the WinUSB driver, you will have to use RB4InstrumentMapper.

Remove WinUSB

  1. Press the Windows key + X and select Device Manager.

    Windows + X menu with "Device Manager"

  2. Expand the Universal Serial Bus devices category and find the device you want to reset.

    Device Manager: Select USB device

    • If this category is not present, you may need to look in the Other devices category instead. In particular, if you're here to fix a failed revert from within the Configure USB Devices menu, this is where it will most likely be located.

  3. Right-click the device and hit Uninstall device.

    Device Manager: Uninstall USB device

    • If a checkbox that says Delete the driver software for this device is displayed on the confirmation dialog, be sure to click it.

      Device Manager: Delete driver software

  4. After confirming and restarting your PC, the device should now appear under the Xbox Peripherals category.

    Device Manager: Restored device

The device is now restored to its original state. Games that natively support the device will work with it again, but RB4InstrumentMapper will no longer be able to make it usable in other games.