forked from XavierBerger/Solar-Router-for-ESPHome
-
Notifications
You must be signed in to change notification settings - Fork 0
/
esp32-proxy-client.yaml
97 lines (81 loc) · 2.92 KB
/
esp32-proxy-client.yaml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
# ----------------------------------------------------------------------------------------------------
# ESPHome configuration - This part depends on your hardware target
# ----------------------------------------------------------------------------------------------------
esphome:
name: solarrouter
friendly_name: SolarRouter
esp32:
board: esp32dev
framework:
type: arduino
# Enable logging
logger:
baud_rate: 115200
level: INFO
logs:
component: ERROR
# Enable Home Assistant API
api:
encryption:
key: !secret api_encryption_key
# Enable over-the-air updates
ota:
- platform: esphome
password: !secret solar_router_ota_password
# Enable improv serial
improv_serial:
# WiFi connection
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
# If you have a WiFi activity plannification, you may have to update the reboot timeout (Default: 15min)
reboot_timeout: 24h
# Activate web interface
web_server:
port: 80
# ----------------------------------------------------------------------------------------------------
# Customisation
# ----------------------------------------------------------------------------------------------------
# This part of the script is designed to be use for customisation. It shouldn't be necessary to
# edit other part of the script to perform configuration.
substitutions:
# Power meter source -----------------------------------------------------------
# Define ip address of Proxy Power Meter
power_meter_ip_address: "192.168.1.30"
# Regulator --------------------------------------------------------------------
regulator: "ac_dimmer"
# Regulator configuration
# Define GPIO pin connected to AC Dimmer for gate and zero crossing detection.
regulator_gate_pin: GPIO22
regulator_zero_crossing_pin: GPIO23
# LEDs -------------------------------------------------------------------------
# Green LED is reflecting regulation status
# Yellow LED is reflecting power meter status
green_led_pin: GPIO19
yellow_led_pin: GPIO18
# Uncomment the following lines if you want to use the source from github
# packages:
# power_meter:
# url: https://github.com/XavierBerger/Solar-Router-for-ESPHome/
# file: solar_router/power_meter_proxy_client.yaml
# refresh: 5s
# regulator:
# url: https://github.com/XavierBerger/Solar-Router-for-ESPHome/
# file: solar_router/regulator_triac.yaml
# refresh: 5s
# solar_router:
# url: https://github.com/XavierBerger/Solar-Router-for-ESPHome/
# file: solar_router/engine.yaml
# refresh: 5s
# Remove the following lines if you want to use the source from github
packages:
common:
<<: !include solar_router/common.yaml
power_meter:
<<: !include solar_router/power_meter_proxy_client.yaml
regulator:
<<: !include solar_router/regulator_triac.yaml
solar_router:
<<: !include solar_router/engine.yaml
energy_counter:
<<: !include solar_router/energy_counter_theorical.yaml