diff --git a/.github/ISSUE_TEMPLATE/bugreport.yaml b/.github/ISSUE_TEMPLATE/bugreport.yaml index 35316a2d0b6..18ce1e63e48 100644 --- a/.github/ISSUE_TEMPLATE/bugreport.yaml +++ b/.github/ISSUE_TEMPLATE/bugreport.yaml @@ -5,17 +5,17 @@ body: - type: markdown attributes: value: | - **Thank you for using Cura and wanting to report a bug.** + **Thank you for using Cura and wanting to report a bug. 🙏** - Before filing, please check if the issue already exists (either open or closed) by using the search bar on the issues page. + Before filing, [please check if the issue already exists](https://github.com/Ultimaker/Cura/issues?q=is%3Aissue) by using the search bar on the issues page. If it does, comment there. Even if it's closed, we can reopen it based on your comment. - Also, please note the application version in the title of the issue "For example (5.3.1) Cannot connect to 3rd-party printer". Please do not write things like **Request** or **BUG** in the title, this is what labels are for. + Please include the cura version in the title of the issue. For example, *"[5.4.0] Support Brim is missing in this model"*. - type: input attributes: - label: Application Version + label: Cura Version description: The version of Cura this issue occurs with. - placeholder: 5.3.0 + placeholder: 5.4.0 validations: required: true - type: input @@ -28,14 +28,14 @@ body: - type: input attributes: label: Printer - description: Which printer was selected in Cura? - placeholder: Ultimaker S7 + description: Which printer was selected in Cura? It also helps to mention if you made any firmware modifications to your printer. + placeholder: Ultimaker S7 / Creality CR-10 with Klipper validations: required: true - type: textarea attributes: label: Reproduction steps - description: Tell us what you did! + description: Share what you did, so we can reproduce it placeholder: | 1. Something you did 2. Something you did next @@ -44,42 +44,39 @@ body: - type: textarea attributes: label: Actual results - description: What happens after the above steps have been followed. + description: What happens after the above steps have been followed? validations: required: true - type: textarea attributes: label: Expected results - description: What should happen after the above steps have been followed. + description: What should happen after the above steps have been followed? validations: required: true - type: markdown attributes: value: | - Please be sure to add the following files: - * To save a project file go to File -> Save project. - Please make sure to .zip your project file. - For big files, you may need to use [WeTransfer](https://wetransfer.com/) or similar file-sharing sites. - G-code files are not project files! - Before you share, please think to yourself. Is this a model that can be shared? - * **Screenshots** of showing the problem, perhaps before/after images. - * A **log file** for crashes and similar issues. - You can find your log file here: - Windows: `%APPDATA%\cura\\cura.log` or usually `C:\Users\\\AppData\Roaming\cura\\cura.log` - MacOS: `$USER/Library/Application Support/cura//cura.log` - Ubuntu/Linux: `$USER/.local/share/cura//cura.log` - - If the Cura user interface still starts, you can also reach this directory from the application menu in Help -> Show settings folder -- type: checkboxes - attributes: - label: Checklist of files to include - options: - - label: Log file - - label: Project file + ### Please add the following files when they are related to... + * 🔵 **The quality of your print** + Please add **a Project File**. It contains the printer and settings we need for troubleshooting. + To save a project file go to File -> Save project. + Please make sure to .zip your project file. For big files, you may need to use [WeTransfer](https://wetransfer.com/) or similar file-sharing sites. + G-code files are not project files! Before you share, please think to yourself. Is this a model that can be shared? + ![Alt Text](https://user-images.githubusercontent.com/40423138/240616958-5a9751f2-bd34-4808-9752-6fde2e27516e.gif) + * 🔵 **Using and interacting with Cura** + Please add **screenshots** showing the issue. + Before and after, and arrows can help here. + * 🔵 **Unexpected crashes and behavior** + Please add **a log file** with information on what your Cura is doing. + You can find your log file here: + Windows: `%APPDATA%\cura\\cura.log` + MacOS: `$USER/Library/Application Support/cura//cura.log` + Ubuntu/Linux: `$USER/.local/share/cura//cura.log` + If the Cura user interface still starts, you can also reach this directory from the application menu in Help -> Show settings folder + - type: textarea attributes: - label: Additional information & file uploads - description: You can add these files and additional information that is relevant to the issue in the comments below. + label: Add your .zip and screenshots here ⬇️ + description: You can add the zip file and additional information that is relevant to the issue in the comments below. validations: required: true - diff --git a/.github/workflows/update-translation.yml b/.github/workflows/update-translation.yml index c1f0e027b8a..65693be9379 100644 --- a/.github/workflows/update-translation.yml +++ b/.github/workflows/update-translation.yml @@ -17,6 +17,13 @@ on: - 'conandata.yml' - 'GitVersion.yml' - '*.jinja' + branches: + - '[1-9].[0-9]' + - '[1-9].[0-9][0-9]' + tags: + - '[1-9].[0-9].[0-9]*' + - '[1-9].[0-9].[0-9]' + - '[1-9].[0-9][0-9].[0-9]*' jobs: update-translations: diff --git a/resources/definitions/alya3dp.def.json b/resources/definitions/alya3dp.def.json index 636a0201849..2fbb62a7946 100644 --- a/resources/definitions/alya3dp.def.json +++ b/resources/definitions/alya3dp.def.json @@ -10,57 +10,18 @@ "file_formats": "text/x-gcode", "platform": "alya_platform.3mf", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", + "dsm_arnitel2045", + "dsm_novamid1070", "generic_abs", - "generic_abs_175", - "generic_bam", "generic_cpe", - "generic_cpe_175", - "generic_cpe_plus", "generic_hips", - "generic_hips_175", "generic_nylon", - "generic_nylon_175", "generic_pc", - "generic_pc_175", "generic_petg", - "generic_petg_175", - "generic_pp", "generic_pva", - "generic_pva_175", - "generic_tough_pla", "generic_tpu", - "generic_tpu_175", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla", - "tizyx_pla", - "tizyx_abs", - "tizyx_pla_bois" + "innofill_innoflex60", + "verbatim_bvoh" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/alyanx3dp.def.json b/resources/definitions/alyanx3dp.def.json index 2572e9db954..eecc96738f4 100644 --- a/resources/definitions/alyanx3dp.def.json +++ b/resources/definitions/alyanx3dp.def.json @@ -10,57 +10,18 @@ "file_formats": "text/x-gcode", "platform": "alya_nx_platform.3mf", "exclude_materials": [ - "chromatik_pla", "dsm_arnitel2045_175", "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_abs", "generic_abs_175", - "generic_bam", - "generic_cpe", "generic_cpe_175", - "generic_cpe_plus", - "generic_hips", "generic_hips_175", - "generic_nylon", "generic_nylon_175", - "generic_pc", "generic_pc_175", - "generic_petg", "generic_petg_175", - "generic_pp", - "generic_pva", "generic_pva_175", - "generic_tough_pla", - "generic_tpu", "generic_tpu_175", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla", - "tizyx_pla", - "tizyx_abs", - "tizyx_pla_bois" + "verbatim_bvoh_175" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/artillery_base.def.json b/resources/definitions/artillery_base.def.json index d12587e3832..d9e71e4333e 100644 --- a/resources/definitions/artillery_base.def.json +++ b/resources/definitions/artillery_base.def.json @@ -9,51 +9,10 @@ "manufacturer": "Artillery", "file_formats": "text/x-gcode", "exclude_materials": [ - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "chromatik_pla", "dsm_arnitel2045_175", "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_bam", - "generic_cffcpe", - "generic_cffpa", - "generic_cpe", - "generic_cpe_plus", - "generic_gffcpe", - "generic_gffpa", - "generic_hips", - "generic_nylon", - "generic_pc", - "generic_pp", - "generic_pva", - "generic_tough_pla", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_pla", - "tizyx_pla_bois", - "verbatim_bvoh_175", - "zyyx_pro_flex", - "zyyx_pro_pla" + "verbatim_bvoh_175" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/atmat_signal_pro_base.def.json b/resources/definitions/atmat_signal_pro_base.def.json index 6f64fab01b0..7d14fa6576c 100644 --- a/resources/definitions/atmat_signal_pro_base.def.json +++ b/resources/definitions/atmat_signal_pro_base.def.json @@ -9,73 +9,13 @@ "manufacturer": "ATMAT sp. z o.o.", "file_formats": "text/x-gcode", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pva-m", - "emotiontech_pva-oks", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "emotiontech_asax", - "emotiontech_hips", - "fiberlogy_hd_pla", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_abs", - "generic_bam", - "generic_cffcpe", - "generic_cffpa", + "dsm_arnitel2045", + "dsm_novamid1070", "generic_cpe", - "generic_cpe_plus", - "generic_gffcpe", - "generic_gffpa", - "generic_hips", - "generic_nylon", - "generic_pc", - "generic_petg", - "generic_pla", - "generic_pp", - "generic_pva", - "generic_tough_pla", - "generic_tpu", - "generic_cpe_175", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla", - "tizyx_pla_bois", - "tizyx_pva", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60", + "verbatim_bvoh" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/creality_base.def.json b/resources/definitions/creality_base.def.json index e5f5baf0db0..b960e2a1b6a 100644 --- a/resources/definitions/creality_base.def.json +++ b/resources/definitions/creality_base.def.json @@ -9,55 +9,10 @@ "manufacturer": "Creality3D", "file_formats": "text/x-gcode", "exclude_materials": [ - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_abs", - "generic_bam", - "generic_cffcpe", - "generic_cffpa", - "generic_cpe", - "generic_cpe_plus", - "generic_gffcpe", - "generic_gffpa", - "generic_hips", - "generic_nylon", - "generic_pc", - "generic_petg", - "generic_pla", - "generic_pp", - "generic_pva", - "generic_tough_pla", - "generic_tpu", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_pla", - "tizyx_pla_bois", - "verbatim_bvoh_175", - "zyyx_pro_flex", - "zyyx_pro_pla" + "dsm_arnitel2045", + "dsm_novamid1070", + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/elegoo_base.def.json b/resources/definitions/elegoo_base.def.json index d41ebfe4622..b0a0717c599 100644 --- a/resources/definitions/elegoo_base.def.json +++ b/resources/definitions/elegoo_base.def.json @@ -9,26 +9,13 @@ "file_formats": "text/x-gcode", "platform": "elegoo_platform.3mf", "exclude_materials": [ - "generic_nylon_175", "generic_nylon", - "generic_hips_175", "generic_hips", - "generic_gffcpe", - "generic_bvoh_175", - "generic_ccfpe", - "generic_cffcpe", - "generic_cpe_plus", - "generic_cpe_175", + "generic_bvoh", "generic_cpe", - "generic_tpu", - "generic_pp", "generic_pc", - "generic_pc_175", - "generic_pvc", "generic_pva", - "generic_pva_175", - "generic_pvc_175", - "generic_pp" + "generic_pvc" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/flyingbear_base.def.json b/resources/definitions/flyingbear_base.def.json index c256ae61f8d..70ae7e8f96e 100644 --- a/resources/definitions/flyingbear_base.def.json +++ b/resources/definitions/flyingbear_base.def.json @@ -9,83 +9,12 @@ "manufacturer": "Flying Bear", "file_formats": "text/x-gcode", "exclude_materials": [ - "3D-Fuel_PLA_PRO_Black", - "3D-Fuel_PLA_SnapSupport", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_absx", - "emotiontech_acetate", - "emotiontech_asax", - "emotiontech_bvoh", - "emotiontech_hips", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pva-m", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_abs", - "generic_bam", - "generic_cffcpe", - "generic_cffpa", - "generic_cpe", - "generic_cpe_plus", - "generic_gffcpe", - "generic_gffpa", - "generic_hips", - "generic_nylon", - "generic_pc", - "generic_petg", - "generic_pla", - "generic_pp", - "generic_pva", - "generic_tough_pla", - "generic_tpu", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "redd_abs", - "redd_asa", - "redd_hips", - "redd_nylon", - "redd_petg", - "redd_pla", - "redd_tpe", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla", - "tizyx_pla_bois", - "tizyx_pva", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "dsm_arnitel2045", + "dsm_novamid1070", + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/fusion3.def.json b/resources/definitions/fusion3.def.json index 30c5b6ce93c..44f76431e01 100644 --- a/resources/definitions/fusion3.def.json +++ b/resources/definitions/fusion3.def.json @@ -9,144 +9,22 @@ "manufacturer": "Fusion3Design", "file_formats": "text/x-gcode", "exclude_materials": [ - "bestfilament_abs_skyblue", - "bestfilament_petg_orange", - "bestfilament_pla_green", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_absx", - "emotiontech_acetate", - "emotiontech_asax", - "emotiontech_bvoh", - "emotiontech_copa", - "emotiontech_hips", - "emotiontech_nylon_1030", - "emotiontech_nylon_1030cf", - "emotiontech_nylon_1070", - "emotiontech_pc", - "emotiontech_pekk", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pla_hr_870", - "emotiontech_pva-m", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "eryone_petg", - "eryone_pla", - "eryone_pla_glow", - "eryone_pla_matte", - "eryone_pla_wood", - "eSUN_PETG_Black", - "eSUN_PETG_Grey", - "eSUN_PETG_Purple", - "Extrudr_GreenTECPro_Anthracite_175", - "Extrudr_GreenTECPro_Black_175", - "Extrudr_GreenTECPro_Blue_175", - "Extrudr_GreenTECPro_Nature_175", - "Extrudr_GreenTECPro_Red_175", - "Extrudr_GreenTECPro_Silver_175", - "Extrudr_GreenTECPro_White_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fdplast_abs_tomato", - "fdplast_petg_gray", - "fdplast_pla_olive", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_bam", - "generic_bvoh_175", - "generic_gffcpe", - "generic_gffpa", + "dsm_arnitel2045", + "dsm_novamid1070", + "Extrudr_GreenTECPro_Anthracite", + "Extrudr_GreenTECPro_Black", + "Extrudr_GreenTECPro_Blue", + "Extrudr_GreenTECPro_Nature", + "Extrudr_GreenTECPro_Red", + "Extrudr_GreenTECPro_Silver", + "Extrudr_GreenTECPro_White", + "generic_bvoh", "generic_hips", - "generic_hips_175", - "generic_pp", "generic_pva", - "generic_pva_175", - "goofoo_abs", - "goofoo_asa", - "goofoo_bronze_pla", - "goofoo_emarble_pla", - "goofoo_esilk_pla", - "goofoo_hips", - "goofoo_pa", - "goofoo_pa_cf", - "goofoo_pc", - "goofoo_peek", - "goofoo_petg", - "goofoo_pla", - "goofoo_pva", - "goofoo_tpe_83a", - "goofoo_tpu_87a", - "goofoo_tpu_95a", - "goofoo_wood_pla", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "layer_one_black_pla", - "layer_one_dark_gray_pla", - "layer_one_white_pla", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "octofiber_pla", - "redd_abs", - "redd_asa", - "redd_hips", - "redd_nylon", - "redd_petg", - "redd_pla", - "redd_tpe", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla", - "tizyx_pla_bois", - "tizyx_pva", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_TPU", - "volumic_abs_ultra", - "volumic_arma_ultra", - "volumic_asa_ultra", - "volumic_br80_ultra", - "volumic_bumper_ultra", - "volumic_cu80_ultra", - "volumic_flex93_ultra", - "volumic_medical_ultra", - "volumic_nylon_ultra", - "volumic_pekk_carbone", - "volumic_petgcarbone_ultra", - "volumic_petg_ultra", - "volumic_pla_ultra", - "volumic_pp_ultra", - "volumic_strong_ultra", - "volumic_support_ultra", - "xyzprinting_abs", - "xyzprinting_antibact_pla", - "xyzprinting_carbon_fiber", - "xyzprinting_colorinkjet_pla", - "xyzprinting_flexible", - "xyzprinting_metallic_pla", - "xyzprinting_nylon", - "xyzprinting_petg", - "xyzprinting_pla", - "xyzprinting_tough_pla", - "xyzprinting_tpu", - "zyyx_pro_flex", - "zyyx_pro_pla" + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/goofoo_e-one.def.json b/resources/definitions/goofoo_e-one.def.json index 39d8a9c74a6..00ac99ab006 100644 --- a/resources/definitions/goofoo_e-one.def.json +++ b/resources/definitions/goofoo_e-one.def.json @@ -2,25 +2,7 @@ "version": 2, "name": "Goofoo E-one", "inherits": "goofoo_open", - "metadata": - { - "visible": true, - "exclude_materials": [ - "goofoo_bronze_pla", - "goofoo_peek", - "goofoo_tpe_83a", - "goofoo_tpu_87a", - "goofoo_tpu_95a", - "goofoo_pa_cf", - "goofoo_pc", - "goofoo_pa", - "goofoo_asa", - "goofoo_abs", - "goofoo_pva", - "goofoo_hips", - "goofoo_pva" - ] - }, + "metadata": { "visible": true }, "overrides": { "machine_depth": { "default_value": 300 }, diff --git a/resources/definitions/goofoo_far.def.json b/resources/definitions/goofoo_far.def.json index 385b767c80b..70e51f61387 100644 --- a/resources/definitions/goofoo_far.def.json +++ b/resources/definitions/goofoo_far.def.json @@ -5,12 +5,6 @@ "metadata": { "visible": false, - "exclude_materials": [ - "goofoo_bronze_pla", - "goofoo_tpe_83a", - "goofoo_tpu_87a", - "goofoo_tpu_95a" - ], "quality_definition": "goofoo_far" } } \ No newline at end of file diff --git a/resources/definitions/goofoo_open.def.json b/resources/definitions/goofoo_open.def.json index 5a1c7070248..663a14cd014 100644 --- a/resources/definitions/goofoo_open.def.json +++ b/resources/definitions/goofoo_open.def.json @@ -5,18 +5,6 @@ "metadata": { "visible": false, - "exclude_materials": [ - "goofoo_bronze_pla", - "goofoo_peek", - "goofoo_tpe_83a", - "goofoo_tpu_87a", - "goofoo_tpu_95a", - "goofoo_pa_cf", - "goofoo_pc", - "goofoo_pa", - "goofoo_asa", - "goofoo_abs" - ], "quality_definition": "goofoo_open" } } \ No newline at end of file diff --git a/resources/definitions/goofoo_small.def.json b/resources/definitions/goofoo_small.def.json index edbcd4f6672..b6fda1e2a52 100644 --- a/resources/definitions/goofoo_small.def.json +++ b/resources/definitions/goofoo_small.def.json @@ -5,20 +5,6 @@ "metadata": { "visible": false, - "exclude_materials": [ - "goofoo_bronze_pla", - "goofoo_peek", - "goofoo_tpe_83a", - "goofoo_tpu_87a", - "goofoo_tpu_95a", - "goofoo_pa_cf", - "goofoo_pc", - "goofoo_pa", - "goofoo_asa", - "goofoo_abs", - "goofoo_pva", - "goofoo_hips" - ], "quality_definition": "goofoo_small" } } \ No newline at end of file diff --git a/resources/definitions/goofoo_t-one.def.json b/resources/definitions/goofoo_t-one.def.json index 4117603a2bc..621af6a407b 100644 --- a/resources/definitions/goofoo_t-one.def.json +++ b/resources/definitions/goofoo_t-one.def.json @@ -5,21 +5,6 @@ "metadata": { "visible": true, - "exclude_materials": [ - "goofoo_bronze_pla", - "goofoo_peek", - "goofoo_tpe_83a", - "goofoo_tpu_87a", - "goofoo_tpu_95a", - "goofoo_pa_cf", - "goofoo_pc", - "goofoo_pa", - "goofoo_asa", - "goofoo_abs", - "goofoo_pva", - "goofoo_hips", - "goofoo_pva" - ], "machine_extruder_trains": { "0": "goofoo_tone_1st", diff --git a/resources/definitions/hms434.def.json b/resources/definitions/hms434.def.json index 633ad2007e7..5250df5d733 100644 --- a/resources/definitions/hms434.def.json +++ b/resources/definitions/hms434.def.json @@ -10,79 +10,20 @@ "file_formats": "text/x-gcode", "platform": "hms_platform.obj", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_asax", - "emotiontech_hips", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pva-m", - "emotiontech_pva-oks", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "emotiontech_absx", - "emotiontech_bvoh", - "eSUN_PETG_Black", - "eSUN_PETG_Grey", - "eSUN_PETG_Purple", - "eSUN_PLA_PRO_Black", - "eSUN_PLA_PRO_Grey", - "eSUN_PLA_PRO_Purple", - "eSUN_PLA_PRO_White", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", + "dsm_arnitel2045", + "dsm_novamid1070", "generic_abs", - "generic_abs_175", - "generic_cpe_175", - "generic_hips_175", - "generic_nylon_175", - "generic_pc_175", - "generic_petg_175", - "generic_pva_175", - "generic_tpu_175", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "redd_abs", - "redd_asa", - "redd_hips", - "redd_nylon", - "redd_petg", - "redd_pla", - "redd_tpe", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_TPU", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla", - "tizyx_pla_bois", - "tizyx_pva", - "zyyx_pro_flex", - "zyyx_pro_pla" + "generic_cpe", + "generic_hips", + "generic_nylon", + "generic_pc", + "generic_petg", + "generic_pva", + "generic_tpu", + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/imade3d_jellybox_root.def.json b/resources/definitions/imade3d_jellybox_root.def.json index 83db4c29a2d..0120c3076fb 100644 --- a/resources/definitions/imade3d_jellybox_root.def.json +++ b/resources/definitions/imade3d_jellybox_root.def.json @@ -9,58 +9,18 @@ "manufacturer": "Imade3D", "file_formats": "text/x-gcode", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "filo3d_pla", - "generic_abs_175", + "dsm_arnitel2045", + "dsm_novamid1070", "generic_abs", - "generic_bam", - "generic_cpe_175", - "generic_cpe_plus", "generic_cpe", - "generic_hips_175", "generic_hips", - "generic_nylon_175", "generic_nylon", - "generic_pc_175", "generic_pc", "generic_petg", - "generic_petg_175", "generic_pla", - "generic_pla_175", - "generic_pp", - "generic_pva_175", "generic_pva", - "generic_tough_pla", - "generic_tpu", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "tizyx_abs", - "tizyx_pla_bois", - "tizyx_pla", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "innofill_innoflex60", + "verbatim_bvoh" ] }, "overrides": diff --git a/resources/definitions/kingroon_base.def.json b/resources/definitions/kingroon_base.def.json index 2530ae87b41..7b318018f7f 100644 --- a/resources/definitions/kingroon_base.def.json +++ b/resources/definitions/kingroon_base.def.json @@ -9,108 +9,17 @@ "manufacturer": "Kingroon", "file_formats": "text/x-gcode", "exclude_materials": [ - "3D-Fuel_PLA_PRO_Black", - "3D-Fuel_PLA_SnapSupport", - "bestfilament_abs_skyblue", - "bestfilament_petg_orange", - "bestfilament_pla_green", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_absx", - "emotiontech_acetate", - "emotiontech_asax", - "emotiontech_copa", - "emotiontech_nylon_1030", - "emotiontech_nylon_1030cf", - "emotiontech_nylon_1070", - "emotiontech_pc", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pla_hr_870", - "emotiontech_bvoh", - "emotiontech_hips", - "emotiontech_pva-m", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "eSUN_PLA_PRO_White", - "eSUN_PETG_Black", - "eSUN_PETG_Grey", - "eSUN_PETG_Purple", - "eSUN_PLA_PRO_Black", - "eSUN_PLA_PRO_Grey", - "eSUN_PLA_PRO_Purple", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fdplast_pla_olive", - "fdplast_abs_tomato", - "fdplast_petg_gray", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_cpe_175", - "generic_hips_175", - "generic_nylon_175", - "generic_pc_175", - "generic_pva_175", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "layer_one_white_pla", - "layer_one_black_pla", - "layer_one_dark_gray_pla", - "leapfrog_pva_natural", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "redd_tpe", - "redd_abs", - "redd_asa", - "redd_hips", - "redd_nylon", - "redd_petg", - "redd_pla", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla", - "tizyx_pla_bois", - "tizyx_pva", - "tizyx_abs", - "verbatim_bvoh_175", - "Vertex_Delta_TPU", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "volumic_support_ultra", - "volumic_abs_ultra", - "volumic_arma_ultra", - "volumic_asa_ultra", - "volumic_br80_ultra", - "volumic_bumper_ultra", - "volumic_cu80_ultra", - "volumic_flex93_ultra", - "volumic_medical_ultra", - "volumic_nylon_ultra", - "volumic_pekk_carbone", - "volumic_petg_ultra", - "volumic_petgcarbone_ultra", - "volumic_pla_ultra", - "volumic_pp_ultra", - "volumic_strong_ultra", - "zyyx_pro_flex", - "zyyx_pro_pla" + "dsm_arnitel2045", + "dsm_novamid1070", + "generic_cpe", + "generic_hips", + "generic_nylon", + "generic_pc", + "generic_pva", + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/kupido.def.json b/resources/definitions/kupido.def.json index 3a202653c4e..dbe57bb95ac 100644 --- a/resources/definitions/kupido.def.json +++ b/resources/definitions/kupido.def.json @@ -9,55 +9,17 @@ "manufacturer": "Kati Hal ARGE", "file_formats": "text/x-gcode", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_bam", + "dsm_arnitel2045", + "dsm_novamid1070", "generic_cpe", - "generic_cpe_175", - "generic_cpe_plus", "generic_hips", - "generic_hips_175", "generic_nylon", - "generic_nylon_175", "generic_pc", - "generic_pc_175", "generic_petg", - "generic_petg_175", - "generic_pp", "generic_pva", - "generic_pva_175", - "generic_tough_pla", "generic_tpu", - "generic_tpu_175", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla", - "tizyx_pla", - "tizyx_abs", - "tizyx_pla_bois" + "innofill_innoflex60", + "verbatim_bvoh" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/leapfrog_bolt_pro.def.json b/resources/definitions/leapfrog_bolt_pro.def.json index a5b0a533454..c880eef16c3 100644 --- a/resources/definitions/leapfrog_bolt_pro.def.json +++ b/resources/definitions/leapfrog_bolt_pro.def.json @@ -10,58 +10,21 @@ "file_formats": "text/x-gcode", "platform": "leapfrog_bolt_pro_platform.3mf", "exclude_materials": [ - "generic_pla_175", - "generic_abs_175", - "generic_cpe_175", - "generic_hips_175", - "generic_nylon_175", - "generic_pc_175", - "generic_petg_175", - "generic_pva_175", - "generic_tpu_175", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pva-m", - "emotiontech_pva-oks", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "tizyx_abs", - "tizyx_pla", - "tizyx_flex", - "tizyx_petg", - "tizyx_pva", - "tizyx_pla_bois", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "generic_pla", + "generic_abs", + "generic_cpe", + "generic_hips", + "generic_nylon", + "generic_pc", + "generic_petg", + "generic_pva", + "generic_tpu", + "dsm_arnitel2045", + "dsm_novamid1070", + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60", + "verbatim_bvoh" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/mingda_base.def.json b/resources/definitions/mingda_base.def.json index 6da76584f3f..23dcf21f48e 100644 --- a/resources/definitions/mingda_base.def.json +++ b/resources/definitions/mingda_base.def.json @@ -9,51 +9,10 @@ "manufacturer": "Mingda", "file_formats": "text/x-gcode", "exclude_materials": [ - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_bam", - "generic_cffcpe", - "generic_cffpa", - "generic_cpe", - "generic_cpe_plus", - "generic_gffcpe", - "generic_gffpa", - "generic_hips", - "generic_nylon", - "generic_pc", - "generic_pp", - "generic_pva", - "generic_tough_pla", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_pla", - "tizyx_pla_bois", - "verbatim_bvoh_175", - "zyyx_pro_flex", - "zyyx_pro_pla" + "dsm_arnitel2045", + "dsm_novamid1070", + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/sovol_base.def.json b/resources/definitions/sovol_base.def.json index 71dc460a9ff..5c474fb7003 100644 --- a/resources/definitions/sovol_base.def.json +++ b/resources/definitions/sovol_base.def.json @@ -9,55 +9,10 @@ "manufacturer": "Sovol 3D", "file_formats": "text/x-gcode", "exclude_materials": [ - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_abs", - "generic_bam", - "generic_cffcpe", - "generic_cffpa", - "generic_cpe", - "generic_cpe_plus", - "generic_gffcpe", - "generic_gffpa", - "generic_hips", - "generic_nylon", - "generic_pc", - "generic_petg", - "generic_pla", - "generic_pp", - "generic_pva", - "generic_tough_pla", - "generic_tpu", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_pla", - "tizyx_pla_bois", - "verbatim_bvoh_175", - "zyyx_pro_flex", - "zyyx_pro_pla" + "dsm_arnitel2045", + "dsm_novamid1070", + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/tizyx_evy.def.json b/resources/definitions/tizyx_evy.def.json index fc2eadc2fbd..41b2b982be3 100644 --- a/resources/definitions/tizyx_evy.def.json +++ b/resources/definitions/tizyx_evy.def.json @@ -10,49 +10,16 @@ "file_formats": "text/x-gcode", "platform": "tizyx_k25_platform.3mf", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_bam", + "dsm_arnitel2045", + "dsm_novamid1070", "generic_cpe", - "generic_cpe_175", - "generic_cpe_plus", "generic_hips", - "generic_hips_175", "generic_nylon", - "generic_nylon_175", "generic_pc", - "generic_pc_175", - "generic_pp", "generic_pva", - "generic_pva_175", "generic_tpu", - "generic_tpu_175", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/tizyx_evy_dual.def.json b/resources/definitions/tizyx_evy_dual.def.json index 1ea1095af55..22046a16ff4 100644 --- a/resources/definitions/tizyx_evy_dual.def.json +++ b/resources/definitions/tizyx_evy_dual.def.json @@ -10,40 +10,15 @@ "file_formats": "text/x-gcode", "platform": "tizyx_k25_platform.3mf", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_cpe_175", - "generic_cpe_plus", - "generic_hips_175", - "generic_nylon_175", - "generic_pc_175", - "generic_pva_175", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "dsm_arnitel2045", + "dsm_novamid1070", + "generic_cpe", + "generic_hips", + "generic_nylon", + "generic_pc", + "generic_pva", + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/tizyx_k25.def.json b/resources/definitions/tizyx_k25.def.json index cc301ab54e3..60005e87127 100644 --- a/resources/definitions/tizyx_k25.def.json +++ b/resources/definitions/tizyx_k25.def.json @@ -10,56 +10,19 @@ "file_formats": "text/x-gcode", "platform": "tizyx_k25_platform.3mf", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", + "dsm_arnitel2045", + "dsm_novamid1070", "generic_abs", - "generic_abs_175", - "generic_bam", "generic_cpe", - "generic_cpe_175", - "generic_cpe_plus", "generic_hips", - "generic_hips_175", "generic_nylon", - "generic_nylon_175", "generic_pc", - "generic_pc_175", "generic_petg", - "generic_petg_175", "generic_pla", - "generic_pla_175", - "generic_pp", "generic_pva", - "generic_pva_175", - "generic_tough_pla", "generic_tpu", - "generic_tpu_175", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "innofill_innoflex60_175", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "innofill_innoflex60", + "verbatim_bvoh" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/trimaker_cosmosII.def.json b/resources/definitions/trimaker_cosmosII.def.json index 475eb4e371f..c16d8397abe 100644 --- a/resources/definitions/trimaker_cosmosII.def.json +++ b/resources/definitions/trimaker_cosmosII.def.json @@ -10,89 +10,21 @@ "file_formats": "text/x-gcode", "platform": "trimaker_cosmosII_platform.stl", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_absx", - "emotiontech_asax", - "emotiontech_bvoh", - "emotiontech_hips", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pva-m", - "emotiontech_pva-oks", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "eSUN_PETG_Black", - "eSUN_PETG_Grey", - "eSUN_PETG_Purple", - "eSUN_PLA_PRO_Black", - "eSUN_PLA_PRO_Grey", - "eSUN_PLA_PRO_Purple", - "eSUN_PLA_PRO_White", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_abs_175", - "generic_bam", - "generic_cffcpe", - "generic_cffpa", + "dsm_arnitel2045", + "dsm_novamid1070", + "generic_abs", "generic_cpe", - "generic_cpe_175", - "generic_cpe_plus", - "generic_gffcpe", - "generic_gffpa", "generic_hips", - "generic_hips_175", "generic_nylon", - "generic_nylon_175", "generic_pc", - "generic_pc_175", "generic_petg", - "generic_petg_175", "generic_pla", - "generic_pla_175", - "generic_pp", "generic_pva", - "generic_pva_175", - "generic_tough_pla", "generic_tpu", - "generic_tpu_175", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla", - "tizyx_pla_bois", - "tizyx_pva", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60", + "verbatim_bvoh" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/trimaker_nebula.def.json b/resources/definitions/trimaker_nebula.def.json index c380f34a9a5..4e17fe9f84d 100644 --- a/resources/definitions/trimaker_nebula.def.json +++ b/resources/definitions/trimaker_nebula.def.json @@ -10,89 +10,21 @@ "file_formats": "text/x-gcode", "platform": "trimaker_nebula_platform.stl", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_absx", - "emotiontech_asax", - "emotiontech_bvoh", - "emotiontech_hips", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pva-m", - "emotiontech_pva-oks", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "eSUN_PETG_Black", - "eSUN_PETG_Grey", - "eSUN_PETG_Purple", - "eSUN_PLA_PRO_Black", - "eSUN_PLA_PRO_Grey", - "eSUN_PLA_PRO_Purple", - "eSUN_PLA_PRO_White", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "generic_abs_175", - "generic_bam", - "generic_cffcpe", - "generic_cffpa", + "dsm_arnitel2045", + "dsm_novamid1070", + "generic_abs", "generic_cpe", - "generic_cpe_175", - "generic_cpe_plus", - "generic_gffcpe", - "generic_gffpa", "generic_hips", - "generic_hips_175", "generic_nylon", - "generic_nylon_175", "generic_pc", - "generic_pc_175", "generic_petg", - "generic_petg_175", "generic_pla", - "generic_pla_175", - "generic_pp", "generic_pva", - "generic_pva_175", - "generic_tough_pla", "generic_tpu", - "generic_tpu_175", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla", - "tizyx_pla_bois", - "tizyx_pva", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60", + "verbatim_bvoh" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/ultimaker2_plus.def.json b/resources/definitions/ultimaker2_plus.def.json index 18b377813a9..1b3ddcc953e 100644 --- a/resources/definitions/ultimaker2_plus.def.json +++ b/resources/definitions/ultimaker2_plus.def.json @@ -20,10 +20,14 @@ "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", + "ultimaker_tough_pla_blue", + "ultimaker_tough_pla_gray", + "ultimaker_tough_pla_yellow", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", + "generic_petcf", "structur3d_dap100silicone", "ultimaker_petg_red", "ultimaker_petg_blue", @@ -38,7 +42,10 @@ "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", - "ultimaker_petg_yellow_fluorescent" + "ultimaker_petg_yellow_fluorescent", + "ultimaker_petcf_black", + "ultimaker_petcf_blue", + "ultimaker_petcf_gray" ], "firmware_file": "MarlinUltimaker2plus.hex", "first_start_actions": [], diff --git a/resources/definitions/ultimaker2_plus_connect.def.json b/resources/definitions/ultimaker2_plus_connect.def.json index dc55d8febf7..20e914284fc 100644 --- a/resources/definitions/ultimaker2_plus_connect.def.json +++ b/resources/definitions/ultimaker2_plus_connect.def.json @@ -10,19 +10,14 @@ "platform": "ultimaker2_plus_connect_platform.obj", "exclude_materials": [ "generic_hips", - "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", - "generic_tough_pla", - "ultimaker_tough_pla_black", - "ultimaker_tough_pla_green", - "ultimaker_tough_pla_red", - "ultimaker_tough_pla_white", - "ultimaker_tough_pla_blue", - "ultimaker_tough_pla_gray", - "ultimaker_tough_pla_yellow", + "ultimaker_petcf_black", + "ultimaker_petcf_blue", + "ultimaker_petcf_gray", + "generic_petcf", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index a929e28258a..af8fc071220 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -18,6 +18,10 @@ "generic_cffpa", "generic_gffcpe", "generic_gffpa", + "generic_petcf", + "ultimaker_petcf_black", + "ultimaker_petcf_blue", + "ultimaker_petcf_gray", "structur3d_dap100silicone" ], "firmware_update_info": diff --git a/resources/definitions/ultimaker_original.def.json b/resources/definitions/ultimaker_original.def.json index c34dd4aadfb..00f46159717 100644 --- a/resources/definitions/ultimaker_original.def.json +++ b/resources/definitions/ultimaker_original.def.json @@ -21,10 +21,14 @@ "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", + "ultimaker_tough_pla_blue", + "ultimaker_tough_pla_gray", + "ultimaker_tough_pla_yellow", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", + "generic_petcf", "structur3d_dap100silicone", "ultimaker_petg_blue", "ultimaker_petg_grey", @@ -39,7 +43,10 @@ "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent", - "ultimaker_petg_red" + "ultimaker_petg_red", + "ultimaker_petcf_black", + "ultimaker_petcf_blue", + "ultimaker_petcf_gray" ], "firmware_file": "MarlinUltimaker-{baudrate}.hex", "firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}.hex", diff --git a/resources/definitions/ultimaker_original_dual.def.json b/resources/definitions/ultimaker_original_dual.def.json index 59bc4fb8bb4..ee024dcf0d2 100644 --- a/resources/definitions/ultimaker_original_dual.def.json +++ b/resources/definitions/ultimaker_original_dual.def.json @@ -21,10 +21,14 @@ "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", + "ultimaker_tough_pla_blue", + "ultimaker_tough_pla_gray", + "ultimaker_tough_pla_yellow", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", + "generic_petcf", "structur3d_dap100silicone", "ultimaker_petg_blue", "ultimaker_petg_grey", @@ -39,7 +43,10 @@ "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent", - "ultimaker_petg_red" + "ultimaker_petg_red", + "ultimaker_petcf_black", + "ultimaker_petcf_blue", + "ultimaker_petcf_gray" ], "firmware_file": "MarlinUltimaker-{baudrate}-dual.hex", "firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}-dual.hex", diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index 238df963004..10aaabd6a75 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -16,7 +16,6 @@ ], "exclude_materials": [ "generic_hips", - "generic_petg", "structur3d_dap100silicone" ], "firmware_update_info": diff --git a/resources/definitions/uni_base.def.json b/resources/definitions/uni_base.def.json index 1b3dbc104d5..c6405d213c9 100644 --- a/resources/definitions/uni_base.def.json +++ b/resources/definitions/uni_base.def.json @@ -9,62 +9,12 @@ "manufacturer": "Uni 3D", "file_formats": "text/x-gcode", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_asax", - "emotiontech_hips", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pva-m", - "emotiontech_pva-oks", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "redd_abs", - "redd_asa", - "redd_hips", - "redd_nylon", - "redd_petg", - "redd_pla", - "redd_tpe", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla", - "tizyx_pla_bois", - "tizyx_pva", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "dsm_arnitel2045", + "dsm_novamid1070", + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60", + "verbatim_bvoh" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/definitions/weedo_base.def.json b/resources/definitions/weedo_base.def.json index 305f4f081b4..0a43dae8cc3 100644 --- a/resources/definitions/weedo_base.def.json +++ b/resources/definitions/weedo_base.def.json @@ -9,154 +9,19 @@ "manufacturer": "WEEDO", "file_formats": "text/x-gcode", "exclude_materials": [ - "3D-Fuel_PLA_PRO_Black", - "3D-Fuel_PLA_SnapSupport", - "bestfilament_abs_skyblue", - "bestfilament_petg_orange", - "bestfilament_pla_green", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "generic_pc_175", - "goofoo_abs", - "goofoo_asa", - "goofoo_bronze_pla", - "goofoo_emarble_pla", - "goofoo_esilk_pla", - "goofoo_hips", - "goofoo_pa_cf", - "goofoo_pa", - "goofoo_pc", - "goofoo_peek", - "goofoo_petg", - "goofoo_pla", - "goofoo_pva", - "goofoo_tpe_83a", - "goofoo_tpu_87a", - "goofoo_tpu_95a", - "goofoo_wood_pla", - "emotiontech_abs", - "emotiontech_absx", - "emotiontech_acetate", - "emotiontech_asax", - "emotiontech_bvoh", - "emotiontech_copa", - "emotiontech_hips", - "emotiontech_nylon_1030", - "emotiontech_nylon_1030cf", - "emotiontech_nylon_1070", - "emotiontech_pc", - "emotiontech_pekk", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pla_hr_870", - "emotiontech_pva-m", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "eryone_petg", - "eryone_pla_glow", - "eryone_pla_matte", - "eryone_pla_wood", - "eryone_pla", - "eryone_tpu", - "eSUN_PETG_Black", - "eSUN_PETG_Grey", - "eSUN_PETG_Purple", - "eSUN_PLA_PRO_Black", - "eSUN_PLA_PRO_Grey", - "eSUN_PLA_PRO_Purple", - "eSUN_PLA_PRO_White", - "Extrudr_GreenTECPro_Anthracite_175", - "Extrudr_GreenTECPro_Black_175", - "Extrudr_GreenTECPro_Blue_175", - "Extrudr_GreenTECPro_Nature_175", - "Extrudr_GreenTECPro_Red_175", - "Extrudr_GreenTECPro_Silver_175", - "Extrudr_GreenTECPro_White_175", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fdplast_abs_tomato", - "fdplast_petg_gray", - "fdplast_pla_olive", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "layer_one_black_pla", - "layer_one_dark_gray_pla", - "layer_one_white_pla", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "redd_abs", - "redd_asa", - "redd_hips", - "redd_nylon", - "redd_petg", - "redd_pla", - "redd_tpe", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla_bois", - "tizyx_pla", - "tizyx_pva", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "volumic_abs_ultra", - "volumic_arma_ultra", - "volumic_asa_ultra", - "volumic_br80_ultra", - "volumic_bumper_ultra", - "volumic_cu80_ultra", - "volumic_flex93_ultra", - "volumic_medical_ultra", - "volumic_nylon_ultra", - "volumic_pekk_carbone", - "volumic_petg_ultra", - "volumic_petgcarbone_ultra", - "volumic_pla_ultra", - "volumic_pp_ultra", - "volumic_strong_ultra", - "volumic_support_ultra", - "xyzprinting_abs", - "xyzprinting_antibact_pla", - "xyzprinting_carbon_fiber", - "xyzprinting_colorinkjet_pla", - "xyzprinting_flexible", - "xyzprinting_metallic_pla", - "xyzprinting_nylon", - "xyzprinting_petg", - "xyzprinting_pla", - "xyzprinting_tough_pla", - "xyzprinting_tpu", - "zyyx_pro_flex", - "zyyx_pro_pla" + "Extrudr_GreenTECPro_Anthracite", + "Extrudr_GreenTECPro_Black", + "Extrudr_GreenTECPro_Blue", + "Extrudr_GreenTECPro_Nature", + "Extrudr_GreenTECPro_Red", + "Extrudr_GreenTECPro_Silver", + "Extrudr_GreenTECPro_White", + "verbatim_bvoh", + "dsm_arnitel2045", + "dsm_novamid1070", + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60" ], "has_machine_quality": false, "has_materials": true, diff --git a/resources/definitions/weedo_x40.def.json b/resources/definitions/weedo_x40.def.json index 043bae3cb0b..acf99f18029 100644 --- a/resources/definitions/weedo_x40.def.json +++ b/resources/definitions/weedo_x40.def.json @@ -10,135 +10,13 @@ "file_formats": "text/x-gcode", "platform": "weedo_x40.3mf", "exclude_materials": [ - "3D-Fuel_PLA_PRO_Black", - "3D-Fuel_PLA_SnapSupport", - "bestfilament_abs_skyblue", - "bestfilament_petg_orange", - "bestfilament_pla_green", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "generic_pc_175", - "generic_nylon_175", - "goofoo_abs", - "goofoo_asa", - "goofoo_bronze_pla", - "goofoo_emarble_pla", - "goofoo_esilk_pla", - "goofoo_hips", - "goofoo_pa_cf", - "goofoo_pa", - "goofoo_pc", - "goofoo_peek", - "goofoo_petg", - "goofoo_pla", - "goofoo_pva", - "goofoo_tpe_83a", - "goofoo_tpu_87a", - "goofoo_tpu_95a", - "goofoo_wood_pla", - "emotiontech_abs", - "emotiontech_absx", - "emotiontech_acetate", - "emotiontech_asax", - "emotiontech_bvoh", - "emotiontech_copa", - "emotiontech_hips", - "emotiontech_nylon_1030", - "emotiontech_nylon_1030cf", - "emotiontech_nylon_1070", - "emotiontech_pc", - "emotiontech_pekk", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pla_hr_870", - "emotiontech_pva-m", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "eryone_petg", - "eryone_pla_glow", - "eryone_pla_matte", - "eryone_pla_wood", - "eryone_pla", - "eSUN_PETG_Black", - "eSUN_PETG_Grey", - "eSUN_PETG_Purple", - "eSUN_PLA_PRO_Black", - "eSUN_PLA_PRO_Grey", - "eSUN_PLA_PRO_Purple", - "eSUN_PLA_PRO_White", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fdplast_abs_tomato", - "fdplast_petg_gray", - "fdplast_pla_olive", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "layer_one_black_pla", - "layer_one_dark_gray_pla", - "layer_one_white_pla", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "redd_abs", - "redd_asa", - "redd_hips", - "redd_nylon", - "redd_petg", - "redd_pla", - "redd_tpe", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla_bois", - "tizyx_pla", - "tizyx_pva", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "volumic_abs_ultra", - "volumic_arma_ultra", - "volumic_asa_ultra", - "volumic_br80_ultra", - "volumic_bumper_ultra", - "volumic_cu80_ultra", - "volumic_flex93_ultra", - "volumic_medical_ultra", - "volumic_nylon_ultra", - "volumic_pekk_carbone", - "volumic_petg_ultra", - "volumic_petgcarbone_ultra", - "volumic_pla_ultra", - "volumic_pp_ultra", - "volumic_strong_ultra", - "volumic_support_ultra", - "zyyx_pro_flex", - "zyyx_pro_pla" + "generic_pc", + "generic_nylon", + "dsm_arnitel2045", + "dsm_novamid1070", + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/xyzprinting_da_vinci_jr_1p0a_pro.def.json b/resources/definitions/xyzprinting_da_vinci_jr_1p0a_pro.def.json index 164c0eb5796..c3b4edd4dbf 100644 --- a/resources/definitions/xyzprinting_da_vinci_jr_1p0a_pro.def.json +++ b/resources/definitions/xyzprinting_da_vinci_jr_1p0a_pro.def.json @@ -8,38 +8,6 @@ "author": "XYZprinting Software", "manufacturer": "XYZprinting", "file_formats": "text/x-gcode", - "exclude_materials": [ - "generic_hips", - "generic_petg", - "generic_bam", - "ultimaker_bam", - "generic_pva", - "ultimaker_pva", - "generic_tough_pla", - "ultimaker_tough_pla_black", - "ultimaker_tough_pla_green", - "ultimaker_tough_pla_red", - "ultimaker_tough_pla_white", - "generic_cffcpe", - "generic_cffpa", - "generic_gffcpe", - "generic_gffpa", - "structur3d_dap100silicone", - "ultimaker_petg_blue", - "ultimaker_petg_grey", - "ultimaker_petg_black", - "ultimaker_petg_green", - "ultimaker_petg_white", - "ultimaker_petg_orange", - "ultimaker_petg_silver", - "ultimaker_petg_yellow", - "ultimaker_petg_transparent", - "ultimaker_petg_red_translucent", - "ultimaker_petg_blue_translucent", - "ultimaker_petg_green_translucent", - "ultimaker_petg_yellow_fluorescent", - "ultimaker_petg_red" - ], "has_machine_quality": true, "has_materials": true, "has_variants": true, diff --git a/resources/definitions/zav_base.def.json b/resources/definitions/zav_base.def.json index 2c9516aecfe..03178f5eb9f 100644 --- a/resources/definitions/zav_base.def.json +++ b/resources/definitions/zav_base.def.json @@ -9,71 +9,11 @@ "manufacturer": "Zav Co., Ltd.", "file_formats": "text/x-gcode", "exclude_materials": [ - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "emotiontech_abs", - "emotiontech_absx", - "emotiontech_asax", - "emotiontech_bvoh", - "emotiontech_hips", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pva-m", - "emotiontech_pva-oks", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "eSUN_PETG_Black", - "eSUN_PETG_Grey", - "eSUN_PETG_Purple", - "eSUN_PLA_PRO_Black", - "eSUN_PLA_PRO_Grey", - "eSUN_PLA_PRO_Purple", - "eSUN_PLA_PRO_White", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "redd_abs", - "redd_asa", - "redd_hips", - "redd_nylon", - "redd_petg", - "redd_pla", - "redd_tpe", - "structur3d_dap100silicone", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla", - "tizyx_pla_bois", - "tizyx_pva", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_TPU", - "zyyx_pro_flex", - "zyyx_pro_pla" + "dsm_arnitel2045", + "dsm_novamid1070", + "imade3d_petg", + "imade3d_pla", + "innofill_innoflex60" ], "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, diff --git a/resources/i18n/cs_CZ/cura.po b/resources/i18n/cs_CZ/cura.po index f4949537f55..ce147b62147 100644 --- a/resources/i18n/cs_CZ/cura.po +++ b/resources/i18n/cs_CZ/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: 2023-02-16 20:28+0100\n" "Last-Translator: Miroslav Šustek \n" "Language-Team: DenyCZ \n" diff --git a/resources/i18n/cura.pot b/resources/i18n/cura.pot index 553eae74ac4..7df05f007a4 100644 --- a/resources/i18n/cura.pot +++ b/resources/i18n/cura.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -4879,347 +4879,347 @@ msgctxt "@info:generic" msgid "{} plugins failed to download" msgstr "" msgctxt "description" -msgid "Logs certain events so that they can be used by the crash reporter" +msgid "Provides support for importing profiles from g-code files." msgstr "" msgctxt "name" -msgid "Sentry Logger" +msgid "G-code Profile Reader" msgstr "" msgctxt "description" -msgid "Manages extensions to the application and allows browsing extensions from the UltiMaker website." +msgid "Provides support for reading 3MF files." msgstr "" msgctxt "name" -msgid "Marketplace" +msgid "3MF Reader" msgstr "" msgctxt "description" -msgid "Manages network connections to UltiMaker networked printers." +msgid "Provides removable drive hotplugging and writing support." msgstr "" msgctxt "name" -msgid "UltiMaker Network Connection" +msgid "Removable Drive Output Device Plugin" msgstr "" msgctxt "description" -msgid "Reads g-code from a compressed archive." +msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." msgstr "" msgctxt "name" -msgid "Compressed G-code Reader" +msgid "USB printing" msgstr "" msgctxt "description" -msgid "Provides support for importing profiles from g-code files." +msgid "Manages extensions to the application and allows browsing extensions from the UltiMaker website." msgstr "" msgctxt "name" -msgid "G-code Profile Reader" +msgid "Marketplace" msgstr "" msgctxt "description" -msgid "Provides the Per Model Settings." +msgid "Provides support for writing 3MF files." msgstr "" msgctxt "name" -msgid "Per Model Settings Tool" +msgid "3MF Writer" msgstr "" msgctxt "description" -msgid "Provides the X-Ray view." +msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." msgstr "" msgctxt "name" -msgid "X-Ray View" +msgid "UltiMaker machine actions" msgstr "" msgctxt "description" -msgid "Creates an eraser mesh to block the printing of support in certain places" +msgid "Logs certain events so that they can be used by the crash reporter" msgstr "" msgctxt "name" -msgid "Support Eraser" +msgid "Sentry Logger" msgstr "" msgctxt "description" -msgid "Provides support for reading 3MF files." +msgid "Checks for firmware updates." msgstr "" msgctxt "name" -msgid "3MF Reader" +msgid "Firmware Update Checker" msgstr "" msgctxt "description" -msgid "Writes g-code to a file." +msgid "Provides a monitor stage in Cura." msgstr "" msgctxt "name" -msgid "G-code Writer" +msgid "Monitor Stage" msgstr "" msgctxt "description" -msgid "Allows loading and displaying G-code files." +msgid "Reads g-code from a compressed archive." msgstr "" msgctxt "name" -msgid "G-code Reader" +msgid "Compressed G-code Reader" msgstr "" msgctxt "description" -msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." +msgid "Provides support for writing Ultimaker Format Packages." msgstr "" msgctxt "name" -msgid "Machine Settings Action" +msgid "UFP Writer" msgstr "" msgctxt "description" -msgid "Provides support for importing profiles from legacy Cura versions." +msgid "Provides a normal solid mesh view." msgstr "" msgctxt "name" -msgid "Legacy Cura Profile Reader" +msgid "Solid View" msgstr "" msgctxt "description" -msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." +msgid "Provides a machine actions for updating firmware." msgstr "" msgctxt "name" -msgid "USB printing" +msgid "Firmware Updater" msgstr "" msgctxt "description" -msgid "Provides the preview of sliced layerdata." +msgid "Provides support for reading model files." msgstr "" msgctxt "name" -msgid "Simulation View" +msgid "Trimesh Reader" msgstr "" msgctxt "description" -msgid "Provides a normal solid mesh view." +msgid "Writes g-code to a compressed archive." msgstr "" msgctxt "name" -msgid "Solid View" +msgid "Compressed G-code Writer" msgstr "" msgctxt "description" -msgid "Provides a prepare stage in Cura." +msgid "Provides support for reading Ultimaker Format Packages." msgstr "" msgctxt "name" -msgid "Prepare Stage" +msgid "UFP Reader" msgstr "" msgctxt "description" -msgid "Provides support for reading model files." +msgid "Extension that allows for user created scripts for post processing" msgstr "" msgctxt "name" -msgid "Trimesh Reader" +msgid "Post Processing" msgstr "" msgctxt "description" -msgid "Checks models and print configuration for possible printing issues and give suggestions." +msgid "Allows loading and displaying G-code files." msgstr "" msgctxt "name" -msgid "Model Checker" +msgid "G-code Reader" msgstr "" msgctxt "description" -msgid "Provides support for writing 3MF files." +msgid "Submits anonymous slice info. Can be disabled through preferences." msgstr "" msgctxt "name" -msgid "3MF Writer" +msgid "Slice info" msgstr "" msgctxt "description" -msgid "Provides capabilities to read and write XML-based material profiles." +msgid "Provides a prepare stage in Cura." msgstr "" msgctxt "name" -msgid "Material Profiles" +msgid "Prepare Stage" msgstr "" msgctxt "description" -msgid "Enables ability to generate printable geometry from 2D image files." +msgid "Provides support for reading AMF files." msgstr "" msgctxt "name" -msgid "Image Reader" +msgid "AMF Reader" msgstr "" msgctxt "description" -msgid "Provides support for reading AMF files." +msgid "Provides support for reading X3D files." msgstr "" msgctxt "name" -msgid "AMF Reader" +msgid "X3D Reader" msgstr "" msgctxt "description" -msgid "Provides support for exporting Cura profiles." +msgid "Provides a preview stage in Cura." msgstr "" msgctxt "name" -msgid "Cura Profile Writer" +msgid "Preview Stage" msgstr "" msgctxt "description" -msgid "Provides a machine actions for updating firmware." +msgid "Provides support for importing Cura profiles." msgstr "" msgctxt "name" -msgid "Firmware Updater" +msgid "Cura Profile Reader" msgstr "" msgctxt "description" -msgid "Provides a monitor stage in Cura." +msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library." msgstr "" msgctxt "name" -msgid "Monitor Stage" +msgid "Ultimaker Digital Library" msgstr "" msgctxt "description" -msgid "Writes g-code to a compressed archive." +msgid "Provides the link to the CuraEngine slicing backend." msgstr "" msgctxt "name" -msgid "Compressed G-code Writer" +msgid "CuraEngine Backend" msgstr "" msgctxt "description" -msgid "Checks for firmware updates." +msgid "Provides the preview of sliced layerdata." msgstr "" msgctxt "name" -msgid "Firmware Update Checker" +msgid "Simulation View" msgstr "" msgctxt "description" -msgid "Provides support for writing Ultimaker Format Packages." +msgid "Provides the X-Ray view." msgstr "" msgctxt "name" -msgid "UFP Writer" +msgid "X-Ray View" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." +msgid "Provides the Per Model Settings." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.6.0 to 4.6.2" +msgid "Per Model Settings Tool" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." +msgid "Provides support for exporting Cura profiles." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.13 to 5.0" +msgid "Cura Profile Writer" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." +msgid "Provides support for importing profiles from legacy Cura versions." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.0 to 4.1" +msgid "Legacy Cura Profile Reader" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." +msgid "Writes g-code to a file." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.9 to 4.10" +msgid "G-code Writer" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." +msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.3 to 4.4" +msgid "Version Upgrade 4.4 to 4.5" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." +msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." msgstr "" msgctxt "name" -msgid "Version Upgrade 3.0 to 3.1" +msgid "Version Upgrade 4.9 to 4.10" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 5.2 to Cura 5.3." +msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." msgstr "" msgctxt "name" -msgid "Version Upgrade 5.2 to 5.3" +msgid "Version Upgrade 4.1 to 4.2" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." +msgid "Upgrades configurations from Cura 4.11 to Cura 4.12." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.1 to 4.2" +msgid "Version Upgrade 4.11 to 4.12" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." +msgid "Upgrades configurations from Cura 5.3 to Cura 5.4." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.2 to 4.3" +msgid "Version Upgrade 5.3 to 5.4" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." +msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." msgstr "" msgctxt "name" -msgid "Version Upgrade 3.5 to 4.0" +msgid "Version Upgrade 3.3 to 3.4" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." +msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." msgstr "" msgctxt "name" -msgid "Version Upgrade 2.6 to 2.7" +msgid "Version Upgrade 3.2 to 3.3" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." +msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.6.2 to 4.7" +msgid "Version Upgrade 4.3 to 4.4" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." +msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." msgstr "" msgctxt "name" -msgid "Version Upgrade 2.5 to 2.6" +msgid "Version Upgrade 4.7 to 4.8" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 5.3 to Cura 5.4." +msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." msgstr "" msgctxt "name" -msgid "Version Upgrade 5.3 to 5.4" +msgid "Version Upgrade 3.5 to 4.0" msgstr "" msgctxt "description" @@ -5231,170 +5231,170 @@ msgid "Version Upgrade 4.8 to 4.9" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." +msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." msgstr "" msgctxt "name" -msgid "Version Upgrade 3.3 to 3.4" +msgid "Version Upgrade 3.4 to 3.5" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." +msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." msgstr "" msgctxt "name" -msgid "Version Upgrade 3.2 to 3.3" +msgid "Version Upgrade 2.6 to 2.7" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." +msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." msgstr "" msgctxt "name" -msgid "Version Upgrade 2.1 to 2.2" +msgid "Version Upgrade 4.13 to 5.0" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." +msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." msgstr "" msgctxt "name" -msgid "Version Upgrade 2.2 to 2.4" +msgid "Version Upgrade 2.1 to 2.2" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." +msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.7 to 4.8" +msgid "Version Upgrade 2.7 to 3.0" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." +msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.4 to 4.5" +msgid "Version Upgrade 4.6.2 to 4.7" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.11 to Cura 4.12." +msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.11 to 4.12" +msgid "Version Upgrade 3.0 to 3.1" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." +msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." msgstr "" msgctxt "name" -msgid "Version Upgrade 3.4 to 3.5" +msgid "Version Upgrade 4.0 to 4.1" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." +msgid "Upgrades configurations from Cura 5.2 to Cura 5.3." msgstr "" msgctxt "name" -msgid "Version Upgrade 2.7 to 3.0" +msgid "Version Upgrade 5.2 to 5.3" msgstr "" msgctxt "description" -msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." +msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." msgstr "" msgctxt "name" -msgid "Version Upgrade 4.5 to 4.6" +msgid "Version Upgrade 2.5 to 2.6" msgstr "" msgctxt "description" -msgid "Provides support for reading X3D files." +msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." msgstr "" msgctxt "name" -msgid "X3D Reader" +msgid "Version Upgrade 4.2 to 4.3" msgstr "" msgctxt "description" -msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." +msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." msgstr "" msgctxt "name" -msgid "UltiMaker machine actions" +msgid "Version Upgrade 4.6.0 to 4.6.2" msgstr "" msgctxt "description" -msgid "Provides the link to the CuraEngine slicing backend." +msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." msgstr "" msgctxt "name" -msgid "CuraEngine Backend" +msgid "Version Upgrade 4.5 to 4.6" msgstr "" msgctxt "description" -msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library." +msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." msgstr "" msgctxt "name" -msgid "Ultimaker Digital Library" +msgid "Version Upgrade 2.2 to 2.4" msgstr "" msgctxt "description" -msgid "Submits anonymous slice info. Can be disabled through preferences." +msgid "Checks models and print configuration for possible printing issues and give suggestions." msgstr "" msgctxt "name" -msgid "Slice info" +msgid "Model Checker" msgstr "" msgctxt "description" -msgid "Backup and restore your configuration." +msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." msgstr "" msgctxt "name" -msgid "Cura Backups" +msgid "Machine Settings Action" msgstr "" msgctxt "description" -msgid "Provides support for reading Ultimaker Format Packages." +msgid "Enables ability to generate printable geometry from 2D image files." msgstr "" msgctxt "name" -msgid "UFP Reader" +msgid "Image Reader" msgstr "" msgctxt "description" -msgid "Provides a preview stage in Cura." +msgid "Creates an eraser mesh to block the printing of support in certain places" msgstr "" msgctxt "name" -msgid "Preview Stage" +msgid "Support Eraser" msgstr "" msgctxt "description" -msgid "Provides removable drive hotplugging and writing support." +msgid "Manages network connections to UltiMaker networked printers." msgstr "" msgctxt "name" -msgid "Removable Drive Output Device Plugin" +msgid "UltiMaker Network Connection" msgstr "" msgctxt "description" -msgid "Provides support for importing Cura profiles." +msgid "Provides capabilities to read and write XML-based material profiles." msgstr "" msgctxt "name" -msgid "Cura Profile Reader" +msgid "Material Profiles" msgstr "" msgctxt "description" -msgid "Extension that allows for user created scripts for post processing" +msgid "Backup and restore your configuration." msgstr "" msgctxt "name" -msgid "Post Processing" +msgid "Cura Backups" msgstr "" diff --git a/resources/i18n/de_DE/cura.po b/resources/i18n/de_DE/cura.po index 61fa7f1bf7b..bd1dce77f3f 100644 --- a/resources/i18n/de_DE/cura.po +++ b/resources/i18n/de_DE/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/de_DE/fdmprinter.def.json.po b/resources/i18n/de_DE/fdmprinter.def.json.po index a99e15b8685..9229e59c5fd 100644 --- a/resources/i18n/de_DE/fdmprinter.def.json.po +++ b/resources/i18n/de_DE/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "Ist ein Teil vollständig von einem anderen Teil eingeschlossen, wird be msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "Dieser Wert ist die empfohlene Entfernung der Äste von den Stellen, die durch sie gestützt werden. Er kann überschritten werden, damit Äste ihre Zielposition erreichen (Druckplatte oder einen flachen Teil des Modells). Eine Senkung dieses Werts sorgt für eine stabilere Stützstruktur, erhöht jedoch die Anzahl der Äste und damit den Materialverbrauch/die Druckzeit)." msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "Die Dichte der Stützstrukturdächer und -böden wird eingestellt. Ein h msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "Dadurch wird die Dichte der Stützstruktur angepasst, mit der die Spitzen der Äste generiert werden. Ein höherer Wert führt zu besseren Überhängen, allerdings lässt sich die Stützstruktur schwerer entfernen. Verwenden Sie bei sehr hohen Werten ein Stützdach oder stellen Sie sicher, dass die Dichte der Stützstruktur oben ähnlich hoch ist." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "Beides" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "Beide überlappen" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "Untere Dicke" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "Astdichte" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "Astdichte" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "Winkel des Astdurchmessers" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "Durchmesser" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "Vergrößerung des Durchmessers zum Modell" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "Dies bezeichnet den Durchmesser, den jeder Ast haben sollte, wenn er die Druckplatte erreicht. Verbessert die Betthaftung." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "Horizontalloch-Erweiterung" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "Maximaler Durchmesser der Horizontalloch-Erweiterung" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "Bestimmt, wie weit das Filament jedes Extruders bei Abschluss des GCode- msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "Hierdurch wird bestimmt, wie Stützstruktur-Schnittstelle und Stützstruktur interagieren, wenn sie sich überschneiden. Zurzeit nur für Stützdächer implementiert." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "Dies bezeichnet die minimale Höhe eines Astes, der auf dem Modell platziert werden soll. Verhindert kleine Tropfen in der Stützstruktur. Diese Einstellung wird ignoriert, wenn ein Ast ein Stützdach hält." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "Unterer Fluss der ersten Schicht" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "Durchmesser der ersten Schicht" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "Von innen nach außen" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "Schnittstellenlinien priorisiert" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "Schnittstelle priorisiert" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "Is-Center-Ursprung" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "Ist Stützmaterial" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "Lässt sich das Material im erhitzten Zustand leicht brechen (kristallin msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "Wird dieses Material normalerweise während des Druckvorgangs als Stützmaterial verwendet?" msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "Stützwinkel der Blitz-Füllung" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "Begrenzung der Astreichweite" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "Dieser Parameter schränkt ein, wie weit sich jeder Ast von der Stelle entfernen kann, die er stützt. Dadurch wird die Stabilität der Stützstruktur gestärkt, jedoch erhöht sich die Anzahl der Äste (und damit der Materialverbrauch•/ die Druckzeit)." msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Maximale Beschleunigung Z" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "Maximaler Astwinkel" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "Mindest-Vorschub" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "Mindesthöhe auf Modell" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "Versatz mit Extruder" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "Wenn möglich auf der Druckplatte" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "Bei Bedarf auf dem Modell" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Abstand für Sickerschutz" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "Optimale Astreichweite" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "Polygone in geschnittenen Schichten, die einen Umfang unter diesem Wert msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "Bevorzugter Astwinkel" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "Drucktemperatur erste Schicht" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "Ein Druck der innersten Skirt-Linie mit mehreren Schichten ermöglicht ein einfaches Entfernen des Skirts." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "Der äußerste Teil des oberen/unteren Musters wird durch eine Anzahl vo msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "Präferenz Auflagestelle" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "Skirt-Abstand" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "Skirt-Höhe" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "Drucktemperatur für kleine Schichten" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "Kleine obere/untere Breite" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3042,7 +3042,7 @@ msgstr "" msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "Kleine obere bzw. untere Bereiche werden mit Wänden anstelle des oberen bzw. unteren Standardmusters gefüllt. Dies hilft, ruckartige Bewegungen zu vermeiden." msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "Muster Stützstrukturschnittstelle" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "Schnittstellenpriorität der Stützstruktur" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "Z-Abstand der Stützstruktur" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "Stützlinien priorisiert" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "Stützstruktur priorisiert" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "Oberflächenenergie." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "Vertauschen Sie die Druckreihenfolge der innersten und der zweitinnersten Brim-Linie, um die Entfernung des Brims zu erleichtern." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "Dies beschreibt den Durchmesser der dünnsten Äste der Baumstützstrukt msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "Dies bezeichnet den Durchmesser an der Spitze von Ästen in der Baumstützstruktur." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3926,7 +3926,7 @@ msgstr "" msgctxt "lightning_infill_straightening_angle description" msgid "The infill lines are straightened out to save on printing time. This is the maximum angle of overhang allowed across the length of the infill line." -msgstr "" +msgstr "Um Druckzeit zu sparen, werden die Füllungslinien begradigt. Dies ist der maximal zulässige Winkel des Überhangs über die Länge der Füllung." msgctxt "infill_offset_x description" msgid "The infill pattern is moved this distance along the X axis." @@ -3998,7 +3998,7 @@ msgstr "Der maximale Winkel von Überhängen, nachdem sie druckbar gemacht wurde msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "Dies bezeichnet den maximalen Winkel der Äste, die um das Modell herum entstehen. Verwenden Sie einen geringeren Winkel, um sie vertikaler und stabiler zu gestalten. Verwenden Sie einen stärkeren Winkel, um mehr Reichweite zu erhalten." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "Das Mindestvolumen für jede Schicht des Einzugsturms, um ausreichend Ma msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "Dies bezeichnet die maximale Vergrößerung des Durchmessers eines Astes, der mit dem Modell verbunden werden muss, durch die Zusammenführung mit Ästen, die die Druckplatte erreichen könnten. Die Erhöhung dieses Wertes verkürzt die Druckzeit, vergrößert jedoch die Stützstruktur, die auf dem Modell ruht." msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4262,7 +4262,7 @@ msgstr "Der Außendurchmesser der Düsenspitze." msgctxt "infill_pattern description" msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric patterns are fully printed every layer. Gyroid, cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction. Lightning infill tries to minimize the infill, by only supporting the ceiling of the object." -msgstr "" +msgstr "Das Muster des Füllungsmaterials des Drucks. Die Linien- und Zickzack-Füllung wechselt die Richtung auf abwechselnden Schichten, was die Materialkosten reduziert. Die Gitter-, Dreieck-, Tri-Hexagon-, Kubus-, Oktett-, Viertelkubus-, Kreuz- und konzentrischen Muster werden in jeder Schicht vollständig gedruckt. Die Füllung in Form von Kreiseln, Würfeln, Viertelwürfeln und Achten wechselt mit jeder Schicht, um eine gleichmäßigere Verteilung der Stärke in jeder Richtung zu erreichen. Bei der Blitz-Füllung wird versucht, die Füllung zu minimieren, indem nur die Decke des Objekts unterstützt wird." msgctxt "support_pattern description" msgid "The pattern of the support structures of the print. The different options available result in sturdy or easy to remove support." @@ -4302,11 +4302,11 @@ msgstr "Die Position in der Nähe der Stelle, an der die einzelnen Teile einer E msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "Dies bezeichnet den bevorzugten Winkel der Äste, wenn eine Vermeidung des Modells nicht notwendig ist. Verwenden Sie einen geringeren Winkel, um sie vertikaler und stabiler zu gestalten. Verwenden Sie einen stärkeren Astwinkel, um sie schneller zusammenzuführen." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "Hierdurch wird die bevorzugte Platzierung der Stützstrukturen festgelegt. Wenn Strukturen nicht an der gewünschten Stelle platziert werden können, werden sie anderswo positioniert, möglicherweise sogar auf dem Modell." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "Es wird rund um das Modell eine Wand erstellt, die (heiße) Luft festhä msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "Astspitzendurchmesser" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,7 +4822,7 @@ msgstr "Dreiecke" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "Stammdurchmesser" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4978,7 +4978,7 @@ msgstr "Bei Werten größer als Null verwenden die Combing-Fahrbewegungen, die w msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "Bei Werten größer als Null wird die Horizontalloch-Erweiterung schrittweise auf kleine Löcher angewendet (kleine Löcher werden stärker erweitert). Beim Wert Null wird die Horizontalloch-Erweiterung auf alle Löcher angewendet. Löcher, die größer als der maximale Durchmesser der Horizontalloch-Erweiterung sind, werden nicht erweitert." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/es_ES/cura.po b/resources/i18n/es_ES/cura.po index 1a07f81aa52..526795ba413 100644 --- a/resources/i18n/es_ES/cura.po +++ b/resources/i18n/es_ES/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.3\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/es_ES/fdmprinter.def.json.po b/resources/i18n/es_ES/fdmprinter.def.json.po index 9e18fa5220b..d02b63f351f 100644 --- a/resources/i18n/es_ES/fdmprinter.def.json.po +++ b/resources/i18n/es_ES/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "Una pieza completamente encerrada dentro de otra puede generar un borde msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "Una recomendación de la distancia a la que pueden situarse las ramas de los puntos que sostienen. Las ramas pueden infringir este valor para llegar a su destino (placa de impresión o una pieza plana del modelo). Reducir este valor hará que el soporte sea más resistente, pero aumentará la cantidad de ramas (y, con ello, el uso de material y el tiempo de impresión)" msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "Ajusta la densidad de los techos y suelos de la estructura de soporte. U msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "Ajusta la densidad de la estructura de soporte utilizada para generar las puntas de las ramas. Un valor más alto da como resultado mejores voladizos, pero los soportes son más difíciles de eliminar. Utilice el techo de soporte para valores muy altos o asegúrese de que la densidad del soporte sea igual de alta en la parte superior." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "Ambos" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "Ambos se solapan" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "Grosor inferior" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "Densidad de la rama" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "Diámetro de la rama" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "Ángulo del diámetro de la rama" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "Diámetro" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "Aumento del diámetro para el modelo" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "Diámetro que cada rama trata de alcanzar al llegar a la placa de impresión. Mejora la adherencia a la plataforma." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "Expansión horizontal de orificios" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "Diámetro máximo de la expansión horizontal de los orificios" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "La cantidad de filamento de cada extrusor que se supone que se ha retira msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "Cómo interactuarán la interfaz y el soporte en caso de superposición. Actualmente, solo implantado para techos de soporte." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "Qué altura debe tener una rama si se coloca sobre el modelo. Evita la formación de pequeñas gotas de soporte. Esta configuración se ignora cuando una rama está aguantando un techo de soporte." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "Flujo inferior de la capa inicial" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "Diámetro de la capa inicial" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "Del interior al exterior" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "Líneas de interfaz preferidas" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "Interfaz preferida" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "El origen está centrado" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "Es material de soporte" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "¿Es este el tipo de material que se desprende limpiamente cuando se cal msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "Este material se utiliza normalmente como material de soporte durante la impresión." msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "Ángulo de sujeción de relleno de iluminación" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "Alcance límite de la rama" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "Limite la distancia que debe recorrer cada rama desde el punto que soporta. Esto puede hacer que el soporte sea más resistente, pero aumentará la cantidad de ramas (y, con ello, el uso de material y el tiempo de impresión)" msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Aceleración máxima de Z" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "Ángulo máximo de la rama" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "Velocidad de alimentación mínima" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "Altura mínima para el modelo" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "Desplazamiento con extrusor" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "En la placa de impresión, cuando sea posible" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "Sobre el modelo, en caso de que sea necesario" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Distancia de la placa de rezumado" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "Espaciado óptimo de ramas" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "Se filtran los polígonos en capas segmentadas que tienen una circunfere msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "Ángulo de rama preferido" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "Temperatura de impresión de la capa inicial" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "La impresión de la línea más interna de la falda con varias capas facilita su eliminación." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "Reemplaza la parte más externa del patrón superior/inferior con un nú msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "Preferencia de apoyo" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "Distancia de falda" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "Altura de la falda" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "Temperatura de impresión de capas pequeñas" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "Anchura superior/​inferior pequeña" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3038,11 +3038,11 @@ msgstr "Las pequeñas partes se imprimirán a este porcentaje de su velocidad de msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "Las regiones superiores/inferiores pequeñas se rellenan con paredes en lugar del patrón superior/inferior predeterminado. Esto ayuda a evitar movimientos bruscos." msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "Borde inteligente" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "Patrón de la interfaz de soporte" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "Prioridad de la interfaz de soporte" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "Distancia en Z del soporte" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "Líneas de soporte preferidas" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "Soporte preferido" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "Energía de la superficie." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "Intercambie el orden de impresión de las líneas más internas y del segundo borde más interno. De ese modo se mejora la eliminación del borde." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "El diámetro de las ramas más finas del soporte en árbol. Cuanto más msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "El diámetro de la parte superior de la punta de las ramas de soporte en árbol." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3998,7 +3998,7 @@ msgstr "Ángulo máximo de los voladizos una vez que se han hecho imprimibles. U msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "El ángulo máximo de las ramas mientras crecen alrededor del modelo. Utilice un ángulo más pequeño para hacerlas más verticales y más estables. Utilice un ángulo mayor para abarcar más." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "El volumen mínimo de cada capa de la torre auxiliar que permite purgar msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "El diámetro máximo de una rama que debe conectarse al modelo puede aumentar al fusionarse con ramas que podrían llegar a la placa de impresión. Al aumentarlo, se reduce el tiempo de impresión, pero el área de soporte que descansa sobre el modelo aumenta" msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4302,11 +4302,11 @@ msgstr "La posición cerca de donde comenzará la impresión de cada parte de un msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "El ángulo para las ramas de preferencia cuando no tienen que evitar el modelo. Utilice un ángulo más pequeño para hacerlas más verticales y más estables. Utilice un ángulo mayor para que las ramas se fusionen más rápido." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "La colocación preferida para las estructuras de soporte. Si las estructuras no se pueden poner en la colocación preferida, se pondrán en otro lugar, incluso si eso significa situarlas sobre el modelo." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "Esto creará una pared alrededor del modelo que atrapa el aire (caliente msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "Diámetro de la punta" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,7 +4822,7 @@ msgstr "Triángulos" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "Diámetro del tronco" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4978,7 +4978,7 @@ msgstr "Si es mayor que cero, los movimientos de desplazamiento de peinada que s msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "Cuando es mayor que cero, la expansión horizontal de los orificios se aplica gradualmente en orificios pequeños (los orificios pequeños se expanden más). Cuando se establezca en cero, la expansión horizontal de los orificios se aplicará a todos ellos. Los orificios mayores que el diámetro máximo de expansión horizontal de los orificios no se expanden." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/fi_FI/cura.po b/resources/i18n/fi_FI/cura.po index b8da67996fc..e5b2a12f4c2 100644 --- a/resources/i18n/fi_FI/cura.po +++ b/resources/i18n/fi_FI/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: 2022-07-15 10:53+0200\n" "Last-Translator: Bothof \n" "Language-Team: Finnish\n" diff --git a/resources/i18n/fr_FR/cura.po b/resources/i18n/fr_FR/cura.po index 08111493a34..6e0481e6e2e 100644 --- a/resources/i18n/fr_FR/cura.po +++ b/resources/i18n/fr_FR/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/fr_FR/fdmprinter.def.json.po b/resources/i18n/fr_FR/fdmprinter.def.json.po index 593401d0528..062eba7a0e7 100644 --- a/resources/i18n/fr_FR/fdmprinter.def.json.po +++ b/resources/i18n/fr_FR/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "Une pièce entièrement contenue à l'intérieur d'une autre peut géné msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "Il s'agit de la distance recommandée à laquelle les branches peuvent s'éloigner des points qu'elles soutiennent. Les branches peuvent ne pas respecter cette valeur pour atteindre leur emplacement cible (plateau ou partie plate du modèle). L'abaissement de cette valeur rendra le support plus solide, mais le nombre de branches augmentera (tout comme la quantité de matériau utilisée et le temps d'impression)." msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "Ajuste la densité des plafonds et bas de la structure de support. Une v msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "Ce paramètre ajuste la densité de la structure de support utilisée pour générer les extrémités des branches. Une valeur plus élevée permet d'obtenir de meilleurs porte-à-faux, mais les supports seront plus difficiles à retirer. Utilisez un plafond de support en cas de valeurs très élevées ou veillez à ce que la densité du support soit tout aussi élevée aux extrémités." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "Les deux" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "Chevauchement" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "Épaisseur du dessous" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "Densité des branches" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "Diamètre des branches" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "Angle de diamètre des branches" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "Diamètre" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "Augmentation du diamètre des branches rattachées au modèle" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "Il s'agit du diamètre que chaque branche essaie d'atteindre au niveau du plateau. Ce paramètre améliore l'adhérence au plateau." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "Expansion horizontale des trous" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "Diamètre maximal de l'expansion horizontale des trous" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "La quantité de filament de chaque extrudeuse qui est supposée avoir é msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "Ce paramètre détermine la façon dont l'interface de support et le support interagissent en cas de chevauchement. Il n'est actuellement disponible que pour le plafond de support." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "Il s'agit de la hauteur minimale que doit atteindre une branche si elle est rattachée au modèle. Ce paramètre empêche la formation de petites gouttes de support. Il est ignoré lorsqu'une branche soutient un plafond de support." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "Débit inférieur de la couche initiale" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "Diamètre de la couche initiale" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "De l'intérieur vers l'extérieur" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "Priorité aux lignes d'interface" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "Priorité à l'interface" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "Est l'origine du centre" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "Matériau de support" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "Ce matériau se casse-t-il proprement lorsqu'il est chauffé (cristallin msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "Ce paramètre permet-il d'indiquer si un matériau est généralement utilisé comme matériau de support pendant l'impression." msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "Angle de support du remplissage éclair" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "Limitation de la portée des branches" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "Ce paramètre limite la distance parcourue par chaque branche à partir du point qu'elle soutient. Le support peut ainsi être plus solide, mais le nombre de branches augmentera (tout comme la quantité de matériau utilisée et le temps d'impression)" msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Accélération maximale Z" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "Angle maximal des branches" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "Taux d'alimentation minimal" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "Hauteur minimale par rapport au modèle" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "Décalage avec extrudeuse" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "Sur le plateau si possible" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "Sur le modèle si nécessaire" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Distance du bouclier de suintage" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "Portée optimale des branches" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "Les polygones en couches tranchées dont la circonférence est inférieu msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "Angle des branches souhaité" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "Température d’impression couche initiale" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "La jupe est plus facile à retirer lorsque sa ligne la plus intérieure est imprimée en plusieurs couches." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "Remplace la partie la plus externe du motif du dessus/dessous par un cer msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "Préférence d'emplacement" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "Distance de la jupe" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "Hauteur de la jupe" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "Température d'impression en cas de petite couche" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "Petite largeur du dessus/dessous" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3038,11 +3038,11 @@ msgstr "Les petites structures seront imprimées à ce pourcentage de la vitesse msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "Les petites zones du dessus/dessous sont remplies de parois au lieu du motif de dessus/dessous par défaut. Ce paramètre permet d'éviter les mouvements saccadés." msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "Bordure intelligente" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "Motif de l'interface de support" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "Priorité de l'interface de support" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "Distance Z des supports" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "Priorité aux lignes de support" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "Priorité au support" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "Énergie de la surface." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "Ce paramètre inverse l'ordre d'impression de la ligne de bordure la plus intérieure et de la deuxième ligne de bordure la plus intérieure. La bordure est ainsi plus facile à retirer." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "Diamètre des branches les plus minces du support arborescent. Plus les msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "Il s'agit du diamètre des extrémités des branches du support arborescent." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3998,7 +3998,7 @@ msgstr "L'angle maximal des porte-à-faux après qu'ils aient été rendus impri msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "Il s'agit de l'angle maximal des branches imprimées autour du modèle. Si vous utilisez un angle faible, les branches seront plus verticales et plus stables. Si vous utilisez un angle élevé, vous obtiendrez une plus grande portée." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "Le volume minimum pour chaque touche de la tour d'amorçage afin de purg msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "Le diamètre maximal d'une branche rattachée au modèle peut augmenter lorsqu'elle fusionne avec des branches pouvant atteindre le plateau. Le fait d'augmenter ce diamètre réduit le temps d'impression, mais agrandit la surface du support sur laquelle repose le modèle." msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4302,11 +4302,11 @@ msgstr "La position près de laquelle démarre l'impression de chaque partie dan msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "Ce paramètre détermine l'angle souhaité pour les branches, lorsqu'elles n'ont pas à contourner le modèle. Si vous utilisez un angle faible, les branches seront plus verticales et plus stables. Si vous utilisez un angle élevé, les branches fusionneront plus rapidement." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "Il s'agit de l'emplacement souhaité pour les structures de support. Si les structures ne peuvent pas être placées à l'endroit souhaité, elles seront placées ailleurs, quitte à ce que ce soit sur le modèle." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "Cela créera une paroi autour du modèle qui retient l'air (chaud) et pr msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "Diamètre des extrémités" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,7 +4822,7 @@ msgstr "Triangles" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "Diamètre du tronc" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4978,7 +4978,7 @@ msgstr "Lorsque cette distance est supérieure à zéro, les déplacements de d msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "Lorsque le diamètre est supérieur à zéro, l'expansion horizontale des trous est progressivement appliquée aux petits trous (ces derniers sont élargis). Lorsque le diamètre est défini sur zéro, l'expansion horizontale des trous est appliquée à tous les trous. Les trous dont le diamètre est supérieur au diamètre maximal défini pour l'expansion horizontale des trous ne sont pas élargis." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/hu_HU/cura.po b/resources/i18n/hu_HU/cura.po index 435f9dbdb16..7b90a9530bf 100644 --- a/resources/i18n/hu_HU/cura.po +++ b/resources/i18n/hu_HU/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: 2020-03-24 09:36+0100\n" "Last-Translator: Nagy Attila \n" "Language-Team: ATI-SZOFT\n" diff --git a/resources/i18n/it_IT/cura.po b/resources/i18n/it_IT/cura.po index 85b02a17fdc..0904b37f38e 100644 --- a/resources/i18n/it_IT/cura.po +++ b/resources/i18n/it_IT/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/it_IT/fdmprinter.def.json.po b/resources/i18n/it_IT/fdmprinter.def.json.po index 0ed46ae3159..1017b49dd3a 100644 --- a/resources/i18n/it_IT/fdmprinter.def.json.po +++ b/resources/i18n/it_IT/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "Una parte completamente racchiusa all'interno di un'altra parte può gen msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "Raccomandazione sull'entità della possibile distanza dei rami dai punti che supportano. I rami possono violare questo valore per raggiungere la loro destinazione (piano di stampa o parte piatta del modello). Ridurre questo valore può rendere il supporto più robusto, ma incrementa la quantità di rami (e, di conseguenza, la quantità di materiale/il tempo di stampa)" msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "Regola la densità delle parti superiori e inferiori della struttura di msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "Consente di regolare la densità della struttura di supporto utilizzata per generare le punte dei rami. Un valore più alto si traduce in sbalzi migliori, ma i supporti saranno più difficili da rimuovere. Usa il tetto del supporto per valori molto alti o assicurati che la densità di supporto sia altrettanto alta nella parte superiore." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "Entrambi" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "Entrambi si sovrappongono" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "Spessore degli strati inferiori" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "Densità del ramo" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "Diametro del ramo" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "Angolo del diametro del ramo" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "Diametro" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "Aumento del diametro sul modello" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "Diametro che ogni ramo cerca di ottenere quando raggiunge la piastra di costruzione. Migliora l'adesione al piano." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "Espansione orizzontale dei fori" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "Diametro massimo di espansione orizzontale dei fori" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "La quantità di filamento di ogni estrusore che si presume sia stata ret msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "Come interagiranno l'interfaccia di supporto e il supporto quando si sovrappongono. Attualmente implementato solo per il tetto di supporto." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "Entità dell'altezza di un ramo se è posizionato sul modello. Previene piccoli blob di supporto. Questa impostazione viene ignorata quando un ramo supporta un tetto di supporto." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "Flusso inferiore dello strato iniziale" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "Diametro dello strato iniziale" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "Dall'interno all'esterno" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "Linee di interfaccia preferite" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "Interfaccia preferita" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "Origine del centro" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "È un materiale di supporto" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "Questo tipo di materiale è quello che si stacca in modo netto quando vi msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "Questo materiale viene normalmente utilizzato come materiale di supporto durante la stampa." msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "Angolo di supporto riempimento fulmine" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "Limite di portata dei rami" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "Limita la distanza di ogni ramo dal punto che supporta. Questo può rendere il supporto più robusto, ma aumenta la quantità di rami (e, di conseguenza, la quantità di materiale/il tempo di stampa)" msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Accelerazione massima Z" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "Angolo massimo dei rami" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "Velocità di alimentazione minima" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "Altezza minima rispetto al modello" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "Offset con estrusore" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "Sul piano di stampa, quando possibile" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "Sul modello, se necessario" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Distanza del riparo materiale fuoriuscito" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "Intervallo ottimale dei rami" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "I poligoni in strati sezionati con una circonferenza inferiore a questo msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "Angolo dei rami preferito" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "Temperatura di stampa Strato iniziale" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "Stampare la linea più interna dello skirt con più strati facilita la rimozione dello skirt stesso." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "Sostituisce la parte più esterna della configurazione degli strati supe msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "Preferenza di appoggio" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "Distanza dello skirt" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "Altezza dello skirt" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "Temperatura di stampa per piccoli strati" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "Larghezza superiore e inferiore delle regioni più piccole" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3038,11 +3038,11 @@ msgstr "I dettagli di piccole dimensioni verranno stampati a questa percentuale msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "Le regioni più piccole superiori e inferiori vengono riempite con pareti invece che con la configurazione superiore e inferiore predefinita, evitando movimenti a scatti." msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "Brim smart" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "Configurazione interfaccia supporto" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "Priorità interfaccia di supporto" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "Distanza Z supporto" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "Linee di supporto preferite" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "Supporto preferito" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "Energia superficiale." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "Scambia l'ordine di stampa della prima e seconda linea più interna del brim per agevolarne la rimozione." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "Il diametro dei rami più sottili del supporto. I rami più spessi sono msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "Il diametro della parte superiore della punta dei rami dell'albero di supporto." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3998,7 +3998,7 @@ msgstr "L’angolo massimo degli sbalzi dopo essere stati resi stampabili. A un msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "Angolo massimo dei rami mentre crescono intorno al modello. Usa un angolo inferiore per renderli più verticali e più stabili. Usa un angolo più alto per ottenere una portata maggiore." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "Il volume minimo per ciascuno strato della torre di innesco per scaricar msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "Il diametro massimo di un ramo che deve collegarsi al modello può aumentare unendosi ai rami che potrebbero raggiungere il piano di stampa. L'aumento riduce il tempo di stampa, ma aumenta l'area di supporto che poggia sul modello" msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4302,11 +4302,11 @@ msgstr "La posizione accanto al punto in cui avviare la stampa di ciascuna parte msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "L'angolo dei rami preferito, quando questi non devono evitare il modello. Usa un angolo inferiore per renderli più verticali e più stabili. Usa un angolo più alto per unire più velocemente i rami." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "Il posizionamento preferito delle strutture di supporto. Se le strutture non si possono collocare nella posizione preferita, saranno collocate altrove, anche se ciò significherà posizionarle sul modello." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "In tal modo si creerà una protezione attorno al modello che intrappola msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "Diametro della punta" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,7 +4822,7 @@ msgstr "Triangoli" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "Diametro del tronco" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4978,7 +4978,7 @@ msgstr "Per un valore superiore a zero, le corse di spostamento in modalità com msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "Quando è maggiore di zero, l'Espansione orizzontale dei fori viene applicata gradualmente sui fori piccoli (i fori piccoli vengono espansi maggiormente). Quando l'opzione è impostata su zero, l'espansione orizzontale sarà applicata a tutti i fori. I fori più grandi del diametro massimo di espansione orizzontale non saranno espansi." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/ja_JP/cura.po b/resources/i18n/ja_JP/cura.po index dc29faa5a37..8d3b7a04bdf 100644 --- a/resources/i18n/ja_JP/cura.po +++ b/resources/i18n/ja_JP/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/ja_JP/fdmprinter.def.json.po b/resources/i18n/ja_JP/fdmprinter.def.json.po index fd3744c4d0f..6e9bc898ff6 100644 --- a/resources/i18n/ja_JP/fdmprinter.def.json.po +++ b/resources/i18n/ja_JP/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "別の部品内に完全に囲まれた部品は、別の部品の内側 msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "枝がサポートポイントからどれくらい移動できるかについての推奨値。枝は、目的地（ビルドプレートまたはモデルの平らな部分）に到達するためであればこの値に違反することができます。この値を小さくすることで、サポートをより頑丈にすることができますが、枝の量が増加します（材料の使用量やプリント時間も増加します）。" msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "サポート材のルーフとフロアの密度を調整します　大 msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "枝の先端を生成するために使用されるサポート構造の密度を調整します。大きな値ではオーバーハングが良くなりますが、サポート材が除去しにくくなります。非常に大きな値を指定するにはサポートルーフを使用するか、上部のサポート密度が同様に高くなるようにしてください。" msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "両方" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "両方重ねる" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "底面厚さ" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "枝密度" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "枝直径" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "枝直径角度" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "直径" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "モデルと接続される枝の直径増加" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "ビルドプレートに到達したときに、すべての枝が達成しようとする直径。ベッドの接着性が向上します。" msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "穴の水平展開" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "穴の水平展開の最大直径" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "プリンタ起動gcodeスクリプト完了時に、各エクストル msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "サポートインターフェイスとサポートが重なる場合にどのように相互作用するかを示します。現在、サポートルーフにのみ実装されています。" msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "モデル上に枝を配置する場合、どれくらいの高さが必要かを示します。サポート材が小さな塊になることを防止します。枝がサポートルーフを支えている場合、この設定は無視されます。" msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "初期レイヤーの底面フロー" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "初期レイヤー直径" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "内側から外側へ" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "インターフェイスラインを優先" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "インターフェイスを優先" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "中心位置" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "サポート材かどうか" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "この材料は加熱時にきれいに分解するタイプ (結晶性) msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "この素材が一般的にプリント時のサポート材として使用されるかどうかを示します。" msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "ライトニングインフィルサポート角度" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "枝到達距離制限" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "各枝がサポートポイントからどれくらい移動するかを制限します。これにより、サポートをより頑丈にすることができますが、枝の量が増加します（材料の使用量やプリント時間も増加します）。" msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "最大加速度Z" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "最大枝角度" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "最小送り速度" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "モデルに対する最小高さ" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "エクストルーダーのオフセット" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "可能な場合はビルドプレート上に配置" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "必要に応じてモデル上に配置" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Ooze Shield距離" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "最適な枝範囲" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "この量よりも小さい円周を持つスライスレイヤーのポ msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "希望枝角度" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2580,7 +2580,7 @@ msgstr "初期レイヤー印刷温度" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "最も内側のスカートラインを複数のレイヤーに分けてプリントすることで、スカートを取り外しやすくします。" msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2820,7 +2820,7 @@ msgstr "上部/下部パターンの最も外側の部分を同心円の線で msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "希望配置" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2968,7 +2968,7 @@ msgstr "スカート距離" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "スカート高さ" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3028,7 +3028,7 @@ msgstr "小さいレイヤーのプリント温度" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "小さい上下幅" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3040,11 +3040,11 @@ msgstr "小型形体は通常のプリント速度に対してこの割合でプ msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "小さい上下領域が、デフォルトの上下パターンではなく、ウォールで埋められます。これにより、不安定な動きを回避することができます。" msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "スマートブリム" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3284,7 +3284,7 @@ msgstr "サポートインタフェースパターン" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "サポートインターフェイスの優先順位" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3424,11 +3424,11 @@ msgstr "サポートZ距離" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "サポートラインを優先" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "サポートを優先" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3456,7 +3456,7 @@ msgstr "表面エネルギー。" msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "最も内側のブリムラインと2番目に内側のブリムラインのプリント順序を入れ替えます。これにより、ブリムを取り外しやすくします。" msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3682,7 +3682,7 @@ msgstr "ツリーサポートの最も細い枝の直径。枝は太いほど丈 msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "ツリーサポートの枝の上部先端の直径。" msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -4002,7 +4002,7 @@ msgstr "印刷可能になったオーバーハングの最大角度。 0°の msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "モデルを中心に枝を伸ばす際の枝の最大角度。枝を垂直で安定したものにするためには小さい角度を使用します。高さを得るためには大きい角度を使用します。" msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4178,7 +4178,7 @@ msgstr "プライムタワーの各層の最小容積。" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "モデルに接続する必要がある枝の直径は、ビルドプレートに到達する可能性のある枝とマージされて大きくなる可能性があります。この値を大きくするとプリント時間は短縮されますが、モデル上のサポート領域が大きくなります。" msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4306,11 +4306,11 @@ msgstr "レイヤー内の各パーツの印刷を開始する場所付近の位 msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "モデルを回避する必要がない場合の枝の希望角度。枝を垂直で安定したものにするためには小さい角度を使用します。迅速にマージするには枝の角度を大きくします。" msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "サポート構造の配置希望場所。構造物を希望の場所に配置できない場合は、別の場所に配置されます（モデル上に配置することになったとしても）。" msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4642,7 +4642,7 @@ msgstr "これにより、モデルの周囲に壁ができ、熱を閉じ込め msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "先端直径" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4826,7 +4826,7 @@ msgstr "トライアングル" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "本体直径" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4982,7 +4982,7 @@ msgstr "ゼロを超える場合、この距離より長い移動量をコーミ msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "0より大きい場合、穴の水平展開が小さい穴に対して徐々に適用されます（小さい穴はさらに展開されます）。0に設定すると、すべての穴に穴の水平展開が適用されます。穴の水平展開の最大直径より大きい穴は展開されません。" msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/ko_KR/cura.po b/resources/i18n/ko_KR/cura.po index 65c83f441ec..147d62ba973 100644 --- a/resources/i18n/ko_KR/cura.po +++ b/resources/i18n/ko_KR/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/ko_KR/fdmprinter.def.json.po b/resources/i18n/ko_KR/fdmprinter.def.json.po index f659093a446..6a50a1671c9 100644 --- a/resources/i18n/ko_KR/fdmprinter.def.json.po +++ b/resources/i18n/ko_KR/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "다른 부품 내부에 완전히 둘러싸인 부품은 다른 부품 msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "브랜치가 서포트하는 지점에서 뻗어 나가는 거리에 대한 권장 사항입니다. 브랜치는 목적지(빌드 플레이트 또는 모델의 평평한 부분)에 도달하기 위해 이 값을 초과할 수 있습니다. 이 값을 낮추면 서포트가 더 견고해지지만, 브랜치의 양이 늘어나므로 재료 사용량/프린트 시간이 늘어납니다." msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "서포트의 지붕 및 바닥 밀도를 조정합니다. 값이 높을 msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "브랜치의 팁을 생성하는 데 사용되는 서포트 구조의 밀도를 조정합니다. 값이 클수록 오버행은 개선되지만 서포트를 제거하기가 어려워집니다. 매우 큰 값을 위해서는 서포트 지붕을 사용하거나 상단의 서포트 밀도가 비슷하게 높은지 확인합니다." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "모두" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "둘 다 겹침" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "바닥 두께" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "브랜치 밀도" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "브랜치 직경" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "브랜치 직경 각도" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "직경" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "모델에 대한 직경 증가" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "모든 브랜치가 빌드 플레이트에 도달할 때 달성하려고 하는 직경입니다. 이에 따라 베드 접착력이 개선됩니다." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "구멍 수평 확장" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "구멍 수평 확장 최대 직경" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "프린터 시작 gcode 스크립트가 완료될 때 공유된 노즐 msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "서포트 인터페이스와 서포트가 겹칠 때 상호 작용하는 방식으로, 현재 서포트 지붕에만 구현되어 있습니다." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "모델에 브랜치를 배치할 때 브랜치의 높이를 설정합니다. 이에 따라 서포트의 작은 얼룩이 방지됩니다. 브랜치가 서포트 지붕을 서포트하는 경우 이 설정은 무시됩니다." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "첫 번째 레이어 하단 압출량" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "초기 레이어 직경" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "내부에서 외부로" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "인터페이스 라인 우선" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "인터페이스 우선" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "센터 원점" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "서포트 재료임" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "이 소재는 가열 시 깔끔하게 분리되는 유형(결정형)입 msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "이 재료는 일반적으로 프린팅 중에 서포트 재료로 사용됩니다." msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "라이트닝 내부채움 서포트 각도" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "브랜치 도달 거리 제한" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "각 브랜치가 서포트하는 지점에서 뻗어 나가는 거리를 제한합니다. 이렇게 하면 서포트가 더 견고해질 수 있지만, 브랜치의 양이 늘어나므로 재료 사용량/프린트 시간이 늘어납니다." msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Z 방향 최대 가속도" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "최대 브랜치 각도" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "최소 이송 속도" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "모델에 대한 최소 높이" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "익스트루더로 오프셋" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "가능한 경우 빌드 플레이트에" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "필요한 경우 모델에" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Ooze 쉴드 거리" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "최적 브랜치 범위" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "레이어가 슬라이스 된, 이 값보다 둘레가 작은 다각형 msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "기본 브랜치 각도" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "첫번째 레이어의 프린팅 온도" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "가장 안쪽의 스커트 라인을 여러 겹으로 프린트하면 스커트를 쉽게 제거할 수 있습니다." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "위쪽/아래쪽 패턴의 가장 바깥 쪽 부분을 여러 동심 선 msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "배치 기본 설정" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "스커트 거리" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "스커트 높이" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "소형 레이어 프린팅 온도" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "작은 상단/하단 너비" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3038,11 +3038,11 @@ msgstr "소형 피처는 정상적인 프린트 속도의 이 비율로 프린 msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "작은 상단/하단 영역은 기본 상단/하단 패턴 대신 벽으로 채워집니다. 이렇게 하면 갑작스러운 움직임을 방지하는 데 도움이 됩니다." msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "스마트 브림" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "서포트 인터페이스 패턴" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "서포트 인터페이스 우선순위" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "서포트 Z 거리" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "서포트 라인 우선" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "서포트 우선" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "표면의 에너지입니다." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "가장 안쪽의 브림 라인과 그다음으로 안쪽에 있는 브림 라인의 프린트 순서를 바꿉니다. 이렇게 하면 브림이 잘 제거됩니다." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "트리 서포트의 가장 얇은 브랜치의 직경. 브랜치가 두 msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "트리 서포트 브랜치 팁의 상단 직경입니다." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3998,7 +3998,7 @@ msgstr "프린팅 가능하게 된 후 오버행의 최대 각도. 0도의 값 msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "모델 주위로 브랜치가 자랄 때 브랜치의 최대 각도입니다. 브랜치가 수직에 가깝게 안정적이 되도록 만들려면 더 낮은 각도를 사용하고, 브랜치의 도달 거리를 늘리려면 더 높은 각도를 사용하십시오." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "충분한 재료를 퍼지하기 위해 프라임 타워 각 층의 최 msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "모델에 연결해야 하는 브랜치의 직경은 빌드 플레이트에 도달할 수 있는 브랜치와 병합하여 최대로 늘릴 수 있습니다. 이를 늘리면 프린트 시간이 단축되지만 모델에 닿는 서포트 영역이 증가합니다." msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4302,11 +4302,11 @@ msgstr "레이어에서 각 부품의 프린팅이 시작할 위치 근처입니 msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "모델을 피할 필요가 없을 때 브랜치의 기본 각도입니다. 브랜치가 수직에 가깝게 안정적이 되도록 만들려면 더 낮은 각도를 사용하고, 브랜치가 빨리 합쳐지도록 하려면 더 높은 각도를 사용하십시오." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "서포트 구조물의 기본 배치입니다. 구조물을 원하는 위치에 배치할 수 없는 경우 구조물을 모델 위에 놓더라도 다른 곳에 배치합니다." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "모델 주위에 벽이 생겨 외부 공기 흐름을 막아 (뜨거운 msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "팁 직경" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,7 +4822,7 @@ msgstr "삼각형" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "트렁크 직경" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4978,7 +4978,7 @@ msgstr "0보다 큰 경우 이 거리보다 긴 combing travel은 retraction을 msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "0보다 큰 값으로 설정하면 구멍 수평 확장이 작은 구멍에 점진적으로 적용되고(작은 구멍이 더 확장됨), 0으로 설정하면 구멍 수평 확장이 모든 구멍에 적용됩니다. 구멍 수평 확장 최대 직경보다 큰 구멍은 확장되지 않습니다." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/nl_NL/cura.po b/resources/i18n/nl_NL/cura.po index 34a874f6ee3..4c2c80d2040 100644 --- a/resources/i18n/nl_NL/cura.po +++ b/resources/i18n/nl_NL/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/nl_NL/fdmprinter.def.json.po b/resources/i18n/nl_NL/fdmprinter.def.json.po index 0bb55ba5d82..964248c64cd 100644 --- a/resources/i18n/nl_NL/fdmprinter.def.json.po +++ b/resources/i18n/nl_NL/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "Een deel dat volledig is ingesloten in een ander deel kan een buitenste msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "Een aanbeveling over hoe ver takken kunnen bewegen van de punten die ze ondersteunen. Takken kunnen deze waarde overschrijden om hun bestemming te bereiken (bouwplaat of een plat deel van het model). Als u deze waarde verlaagt, wordt de ondersteuning steviger, maar neemt het aantal takken toe (en daardoor materiaalgebruik/printtijd)." msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "Past de dichtheid van de daken en vloeren van de supportstructuur aan. M msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "Hiermee past u de dichtheid aan van de ondersteunende structuur die wordt gebruikt om de tips van de takken te genereren. Een hogere waarde resulteert in een betere overhang, maar de ondersteuning is moeilijker te verwijderen. Gebruik ondersteunend dak voor zeer hoge waarden of zorg ervoor dat de ondersteuningsdichtheid aan de bovenkant even hoog is." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "Beide" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "Beide overlappen" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "Bodemdikte" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "Takdichtheid" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "Takdiameter" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "Hoek takdiameter" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "Diameter" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "Diameterverhoging naar model" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "Diameter elke tak probeert te bereiken bij het bereiken van de bouwplaat. Verbetert de hechting van het bed." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "Horizontale uitbreiding gaten" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "Gat horizontale expansie max diameter" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "Hoever het filament van elke extruder geacht wordt te zijn ingetrokken v msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "Hoe ondersteuningsinterface en ondersteuning op elkaar inwerken wanneer ze elkaar overlappen. Momenteel alleen geïmplementeerd voor ondersteunend dak." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "Hoe groot moet een tak zijn als deze op het model wordt geplaatst. Voorkomt kleine ondersteunende blobs. Deze instelling wordt genegeerd wanneer een tak een ondersteunend dak ondersteunt." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "Initiële laag onderste lijn" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "Diameter beginlaag" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "Van binnen naar buiten" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "Geprefereerde interfacelijnen" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "Geprefereerde interface" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "Is oorsprongpunt centraal" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "Is support materiaal" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "Breekt dit materiaal recht af wanneer het wordt verwarmd (kristallijn) o msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "Wordt dit materiaal meestal gebruikt als support materiaal tijdens het printen." msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "Hoek supportstructuur bliksemvulling" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "Takbereik beperken" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "Beperken hoe ver elke tak moet bewegen vanaf het punt dat het ondersteunt. Dit kan de steun steviger maken, maar zal de hoeveelheid takken vergroten (en daardoor het materiaalgebruik/de printtijd)." msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Maximale Acceleratie Z" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "Maximale vertakkingshoek" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "Minimale Doorvoersnelheid" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "Minimale hoogte tot model" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "Offset met extruder" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "Op bouwplaat indien mogelijk" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "Op model indien nodig" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Afstand Uitloopscherm" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "Optimaal vertakkingsbereik" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "Polygonen in geslicete lagen, die een kleinere omtrek hebben dan deze wa msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "Geprefereerde vertakkingshoek" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "Printtemperatuur van de eerste laag" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "Het printen van de binnenste skirt-lijn met meerdere lagen maakt het gemakkelijk om de skirt te verwijderen." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "Vervang het buitenste gedeelte van het patroon boven-/onderkant door een msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "Plaatsings voorkeur" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "Skirtafstand" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "Hoogte Skirt" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "Printtemperatuur van de kleine laag" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "Kleine breedte boven/onderzijde" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3038,11 +3038,11 @@ msgstr "Kleine kernmerken worden geprint met een snelheid die gelijk is aan dit msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "Kleine boven-/onderregio's zijn gevuld met muren in plaats van met het standaard boven-/onderpatroon. Dit helpt schokkerige bewegingen te voorkomen." msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "Slimme Brim" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "Patroon Verbindingsstructuur" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "Ondersteuning Interface Prioriteit" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "Z-afstand Supportstructuur" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "Geprefereerde ondersteuningslijnen" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "Geprefereerde ondersteuning" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "Oppervlakte-energie." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "Verwissel de printvolgorde van de binnenste en de op een na binnenste randlijn. Dit verbetert het verwijderen van de rand." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "Hiermee stelt u de diameter in van de dunste takken van de boomsupportst msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "De diameter van de bovenkant van de punt van de takken van de boomsteun." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3998,7 +3998,7 @@ msgstr "De maximale hoek van een overhang nadat deze printbaar is gemaakt. Bij e msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "De maximale hoek van de takken terwijl ze rond het model groeien. Gebruik een lagere hoek om ze verticaler en stabieler te maken. Gebruik een hogere hoek om meer bereik te hebben." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "Het minimale volume voor elke laag van de primepijler om voldoende mater msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "De diameter van een tak die moet aansluiten op het model mag maximaal toenemen door samen te voegen met takken die de bouwplaat zouden kunnen bereiken. Als u dit verhoogt, wordt de printtijd verkort, maar wordt het ondersteuningsgebied dat op het model rust vergroot" msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4302,11 +4302,11 @@ msgstr "De positie nabij waar met het printen van elk deel van een laag moet wor msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "De geprefereerde hoek van de takken, wanneer ze het model niet hoeven te vermijden. Gebruik een lagere hoek om ze verticaler en stabieler te maken. Gebruik een hogere hoek voor takken om sneller samen te voegen." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "De voorkeursplaats van de ondersteunende structuren. Als structuren niet op de gewenste locatie kunnen worden geplaatst, worden ze elders geplaatst, zelfs als dat betekent dat ze op het model moeten worden geplaatst." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "Maak een wand rond het model. Deze vangt (warme) lucht en biedt bescherm msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "Puntdiameter" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,7 +4822,7 @@ msgstr "Driehoeken" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "Stamdiameter" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4978,7 +4978,7 @@ msgstr "Wanneer dit groter dan nul is, vindt bij een combing-beweging die langer msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "Als dit groter is dan nul, wordt de horizontale gatexpansie geleidelijk toegepast op kleine gaten (kleine gaten worden meer uitgebreid). Indien ingesteld op nul, wordt de horizontale gatexpansie toegepast op alle gaten. Gaten groter dan de maximale diameter van de horizontale gatexpansie worden niet vergroot." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/pl_PL/cura.po b/resources/i18n/pl_PL/cura.po index cf089a4b2bd..9c4cc1b3f97 100644 --- a/resources/i18n/pl_PL/cura.po +++ b/resources/i18n/pl_PL/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: 2021-09-07 08:02+0200\n" "Last-Translator: Mariusz Matłosz \n" "Language-Team: Mariusz Matłosz , reprapy.pl\n" diff --git a/resources/i18n/pt_BR/cura.po b/resources/i18n/pt_BR/cura.po index 95c6f5d29cb..363e6f3542e 100644 --- a/resources/i18n/pt_BR/cura.po +++ b/resources/i18n/pt_BR/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.0\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: 2023-02-17 17:37+0100\n" "Last-Translator: Cláudio Sampaio \n" "Language-Team: Cláudio Sampaio \n" diff --git a/resources/i18n/pt_BR/fdmprinter.def.json.po b/resources/i18n/pt_BR/fdmprinter.def.json.po index 755eb2940dc..6e7dd14afca 100644 --- a/resources/i18n/pt_BR/fdmprinter.def.json.po +++ b/resources/i18n/pt_BR/fdmprinter.def.json.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: Cura 5.0\n" "Report-Msgid-Bugs-To: plugins@ultimaker.com\n" "POT-Creation-Date: 2023-06-08 16:32+0000\n" -"PO-Revision-Date: 2023-02-17 16:31+0100\n" +"PO-Revision-Date: 2023-06-25 18:17+0200\n" "Last-Translator: Cláudio Sampaio \n" "Language-Team: Cláudio Sampaio \n" "Language: pt_BR\n" @@ -15,7 +15,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n" -"X-Generator: Poedit 3.2.2\n" +"X-Generator: Poedit 3.3.1\n" msgctxt "ironing_inset description" msgid "A distance to keep from the edges of the model. Ironing all the way to the edge of the mesh may result in a jagged edge on your print." @@ -67,7 +67,7 @@ msgstr "Uma peça completamente contida em outra peça pode gerar um brim extern msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "Uma recomendação de quão distante galhos podem se mover dos pontos que eles suportam. Os galhos podem violar este valor para alcançar seu destino (plataforma de impressão ou parte chata do modelo). Abaixar este valor pode fazer o suporte ficar mais estável, mas aumentará o número de galhos (e por causa disso, ambos o uso de material e o tempo de impressão)" msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -123,7 +123,7 @@ msgstr "Ajusta a densidade dos topos e bases da estrutura de suporte. Um valor m msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "Ajusta a densidade da estrutura de suporte usada para gerar as pontas dos galhos. Um valor mais alto resulta em melhores seções pendentes, mas os suportes ficam mais difíceis de remover. Use Teto de Suporte para valores muito altos ou assegure-se que a densidade de suporte é similarmente alta no topo." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -271,7 +271,7 @@ msgstr "Ambos" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "Ambos se sobrepõem" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -295,15 +295,15 @@ msgstr "Espessura Inferior" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "Densidade de Galho" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "Diâmetro de Galho" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "Ângulo de Diâmetro de Galho" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -715,11 +715,11 @@ msgstr "Diâmetro" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "Aumento de Diâmetro para o Modelo" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "O diâmetro que cada galho tenta alcançar quando se aproxima da plataforma de impressão. Melhora aderência à plataforma." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -931,7 +931,7 @@ msgstr "Exclusivo" msgctxt "experimental label" msgid "Experimental" -msgstr "" +msgstr "Experimental" msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" @@ -943,7 +943,7 @@ msgstr "Costura Extensa" msgctxt "meshfix_extensive_stitching description" msgid "Extensive stitching tries to stitch up open holes in the mesh by closing the hole with touching polygons. This option can introduce a lot of processing time." -msgstr "Costura Extensa tenta costurar buracos abertos na malha fechando o buraco com polígonos que o tocam. Esta opção pode adicionar bastante tempo ao fatiamento das peças." +msgstr "Costura Extensa tenta costurar furos abertos na malha fechando o furo com polígonos que o tocam. Esta opção pode adicionar bastante tempo ao fatiamento das peças." msgctxt "infill_wall_line_count label" msgid "Extra Infill Wall Count" @@ -1303,7 +1303,7 @@ msgstr "Expansão Horizontal do Furo" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "Diâmetro Máximo da Expansão Horizontal de Furo" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1383,11 +1383,11 @@ msgstr "Quanto é assumido que o filamento de cada extrusor tenha retraído da msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "Como a interface de suporte a o suporte interagirão quando eles se sobrepuserem. No momento implementado apenas para teto de suporte." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "Quão alto um galho tem que ser para ser agregado ao modelo. Previne pequenos nódulos de suporte. Este ajuste é ignorado quando um galho está suportando teto de suporte." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1535,7 +1535,7 @@ msgstr "Fluxo da Base da Camada Inicial" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "Diâmetro da Camada Inicial" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1639,11 +1639,11 @@ msgstr "De Dentro Pra Fora" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "Linhas de interface preferidas" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "Interface preferida" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1703,7 +1703,7 @@ msgstr "Origem é no Centro" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "É material de suporte" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1711,7 +1711,7 @@ msgstr "Este material é do tipo que se destaca completamente quando aquecido (c msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "Se esse material é ou não tipicamente usado como material de suporte durante a impressão." msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1779,11 +1779,11 @@ msgstr "Ângulo de Suporte do Preenchimento Relâmpago" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "Limitar Alcance de Galho" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "Limita quão longe cada galho deve percorrer do ponto que ele suporta. Isto pode fazer o suporte mais estável, mas aumentará a quantidade de galhos (e por causa disso, uso de material e tempo de impressão)" msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1935,7 +1935,7 @@ msgstr "Aceleração Máxima em Z" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "Ângulo Máximo de Galho" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2091,7 +2091,7 @@ msgstr "Velocidade Mínima de Alimentação" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "Altura Mínima Para O Modelo" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2227,15 +2227,15 @@ msgstr "Nenhum" msgctxt "magic_mesh_surface_mode option normal" msgid "Normal" -msgstr "" +msgstr "Normal" msgctxt "support_structure option normal" msgid "Normal" -msgstr "" +msgstr "Normal" msgctxt "meshfix_keep_open_polygons description" msgid "Normally Cura tries to stitch up small holes in the mesh and remove parts of a layer with big holes. Enabling this option keeps those parts which cannot be stitched. This option should be used as a last resort option when everything else fails to produce proper g-code." -msgstr "Normalmente o Cura tenta costurar pequenos furos na malha e remover partes de uma camada com grandes buracos. Habilitar esta opção mantém as partes que ele não consegue costurar. Esta opção deve ser usada como última alternativa quando tudo o mais falhar para produzir G-Code apropriado." +msgstr "Normalmente o Cura tenta costurar pequenos furos na malha e remover partes de uma camada com grandes furos. Habilitar esta opção mantém as partes que ele não consegue costurar. Esta opção deve ser usada como última alternativa quando tudo o mais falhar para produzir G-Code apropriado." msgctxt "retraction_combing option noskin" msgid "Not in Skin" @@ -2343,11 +2343,11 @@ msgstr "Deslocamento com o Extrusor" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "Na plataforma de impressão quando possível" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "No modelo se requerido" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2375,7 +2375,7 @@ msgstr "Distância da Cobertura de Escorrimento" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "Alcance Ótimo de Galho" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2463,7 +2463,7 @@ msgstr "Polígonos em camadas fatiadas que tiverem uma circunferência menor que msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "Ângulo Preferido de Galho" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2583,7 +2583,7 @@ msgstr "Temperatura de Impressão da Camada Inicial" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "Imprimir o filete mais interno de skirt com múltiplas camadas torna mais fácil removê-lo." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2823,7 +2823,7 @@ msgstr "Substitui a parte externa do padrão superior/inferir com um número de msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "Preferência de Descanso" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2971,7 +2971,7 @@ msgstr "Distância do Skirt" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "Altura do Skirt" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3032,7 +3032,7 @@ msgstr "Temperatura de Impressão Final" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "Largura do Teto/Base Pequenos" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3044,11 +3044,11 @@ msgstr "Aspectos pequenos serão impressos nessa porcentagem da velocidade norma msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "Regiões pequenas de teto/base são preenchidas com paredes ao invés do padrão default de teto/base. Isto ajuda a prevenir movimentos bruscos." msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "Brim Inteligente" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3289,7 +3289,7 @@ msgstr "Padrão da Interface de Suporte" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "Prioridade de Interface de Suporte" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3431,11 +3431,11 @@ msgstr "Distância em Z do Suporte" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "Filetes de suporte preferidos" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "Suporte preferido" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3463,7 +3463,7 @@ msgstr "Energia de superfície." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "Troca a ordem de impressão do filete de brim mais interno e o segundo mais interno. Isto melhora a remoção do brim." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3687,7 +3687,7 @@ msgstr "O diâmetro dos galhos mais finos do suporte em árvore. Galhos mais gro msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "O diâmetro do topo da ponta dos galhos de suporte em árvore." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -4008,7 +4008,7 @@ msgstr "O ângulo máximo de seçọes pendentes depois de se tornarem imprimív msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "O ângulo máximo dos galhos quando eles crescem em volta do modelo. Use um ângulo menor para torná-los mais verticais e estáveis. Use um ângulo maior para poder ter maior alcance." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4184,7 +4184,7 @@ msgstr "O volume mínimo para cada camada da torre de purga de forma a purgar ma msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "O máximo que o diâmetro de um galho que tem que se conectar ao modelo pode aumentar ao mesclar-se com galhos que podem alcançar a plataforma de impressão. Aumentar este valor reduz tempo de impressão, mas aumenta a área de suporte que se apoia no modelo" msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4315,11 +4315,11 @@ msgstr "A posição perto da qual se inicia a impressão de cada parte em uma ca msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "O ângulo preferido para os galhos, quando eles não têm que evitar o modelo. Use um ângulo menor para torná-los mais verticais e estáveis. Use um ângulo maior para que os galhos se mesclem mais rapidamente." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "O posicionamento preferido das estruturas de suporte.Se as estruturas não puderem ser colocadas na localização escolhida, serão colocadas em outro lugar, mesmo que seja no modelo." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4652,7 +4652,7 @@ msgstr "Isto criará uma parede em volta do modelo que aprisiona ar quente da me msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "Diâmetro da Ponta" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4836,7 +4836,7 @@ msgstr "Triângulos" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "Diâmetro do Tronco" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4992,7 +4992,7 @@ msgstr "Quando maior que zero, os movimentos de percurso de combing que forem ma msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "Quando maior que zero, a Expansão Horizontal de Furo é gradualmente aplicada em pequenos furos (eles são mais expandidos). Quanto é deixada em zero, a Expansão Horizontal de Furo será aplicada a todos os furos. Furos maiores que o Diâmetro Máximo de Expansão Horizontal de Furo não serão expandidos." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/pt_PT/cura.po b/resources/i18n/pt_PT/cura.po index 1c133ed3b6f..f7b25ba9ee8 100644 --- a/resources/i18n/pt_PT/cura.po +++ b/resources/i18n/pt_PT/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/pt_PT/fdmprinter.def.json.po b/resources/i18n/pt_PT/fdmprinter.def.json.po index 43a968e9a57..3e7629faaf1 100644 --- a/resources/i18n/pt_PT/fdmprinter.def.json.po +++ b/resources/i18n/pt_PT/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "Uma peça totalmente fechada dentro de outra peça pode gerar uma aba ex msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "Uma recomendação sobre qual a distância que os ramos podem percorrer a partir dos pontos que apoiam. Os ramos podem desrespeitar este valor, para alcançar o seu destino (placa de construção ou uma parte do modelo). Reduzir esse valor pode tornar o suporte mais resistente, contudo vai aumentar a quantidade de ramos (e, por conseguinte, também o uso de mais material e tempo de impressão)" msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "Ajusta a densidade dos tectos e pisos da estrutura de suporte. Um valor msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "Ajusta a densidade da estrutura de suporte usada para gerar as pontas dos ramos. Um valor mais alto resulta em melhor saliências, mas os suportes são mais difíceis de remover. Use um Teto de Suporte se os valores forem muito altos ou certificar-se de que a densidade dos suportes é igualmente elevada no topo." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "Ambos" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "Ambas se sobrepõem" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "Espessura Inferior" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "Densidade dos Ramos" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "Diâmetro do Ramo" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "Ângulo dos Ramos" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "Diâmetro" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "Aumento do Diâmetro Apoio no Modelo" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "Diâmetro que cada ramo tenta atingir quando chega à placa de construção. Melhora a adesão à base." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -926,7 +926,7 @@ msgstr "Exclusivo" msgctxt "experimental label" msgid "Experimental" -msgstr "" +msgstr "Experimental" msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" @@ -1298,7 +1298,7 @@ msgstr "Expansão horizontal de buraco" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "Diâmetro máximo da Expansão Horizontal de Buraco" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "Até que ponto se assume que o filamento de cada extrusora foi retraído msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "Como a interface de suporte e a estrutura de suporte interagem quando se sobrepõem. Atualmente implementado apenas para o teto de suporte." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "A altura mínima que um ramo deve ter quando apoiado no modelo. Evita pequenas bolhas de suporte. Esta definição é ignorada quando um ramo está a suportar um teto do suporte." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "Fluxo inferior da camada inicial" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "Diâmetro da Camada Inicial" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "De dentro para fora" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "Linhas de interface preferidas" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "Interface preferida" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "O Centro é a Origem" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "É um material de suporte" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "Este tipo de material é daquele que se separa de forma regular quando a msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "Este material é utilizado como material de suporte durante a impressão." msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "Ângulo de suporte de enchimento relâmpago" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "Limitar o Alcance dos Ramos" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "Limita a distância que cada ramo deve percorrer a partir do ponto que apoia. Isto pode tornar o suporte mais resistente, contudo vai aumentar a quantidade de ramos (e, por conseguinte, também o uso de mais material e tempo de impressão)" msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Aceleração Z Máxima" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "Ângulo Máximo dos Ramos" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "Velocidade Mínima de Alimentação" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "Altura Mínima ao Modelo" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "Desviar com extrusor" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "Na placa de construção quando possível" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "No modelo, se necessário" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Distância da proteção contra escorrimentos" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "Alcance dos Ramos Ideal" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "Os polígonos em camadas seccionadas que apresentem uma circunferência msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "Ângulo dos Ramos preferido" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "Temperatura Impressão Camada Inicial" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "Imprimir a linha do contorno mais interior com múltiplas camadas facilita a remoção do contorno." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "Substitui a parte mais exterior do padrão superior/inferior por um núm msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "Preferência de Apoio" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "Distância Contorno" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "Altura do contorno" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "Temperatura de impressão de camada pequena" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "Largura Mínima Superior/Inferior" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3038,11 +3038,11 @@ msgstr "Os elementos pequenos serão impressos a esta percentagem da respetiva v msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "As regiões superiores/inferiores mais pequenas são preenchidas com paredes em vez do padrão superior/inferior predefinido. Isto ajuda a evitar movimentos bruscos." msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "Aba Inteligente" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "Padrão da interface de suporte" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "Prioridade da Interface e Suporte" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "Distância Z de suporte" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "Tipo de linhas de suporte preferidas" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "Estrutura suporte preferida" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "Energia da superfície." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "Trocar a ordem de impressão da linha mais interior e da segunda linha mais interior da aba. Isto permite facilitar a remoção da aba." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "O diâmetro dos ramos mais finos dos suportes tipo árvore. Ramos mais g msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "O diâmetro do topo da ponta dos ramos do suporte de árvore." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3998,7 +3998,7 @@ msgstr "O ângulo máximo das saliências após se terem tornado imprimíveis. C msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "O ângulo máximo dos ramos enquanto estes crescem ao redor do modelo. Utilize um ângulo menor para os tornar mais verticais e mais estáveis. Use um ângulo maior para poderem ter um maior alcance." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "O volume mínimo para cada camada da torre de preparação para preparar msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "O diâmetro máximo que um ramo, que tem de se apoiar no modelo, pode ter ao unir-se com os ramos que podem alcançar a placa de construção. Aumentar este valor reduz o tempo de impressão, mas aumenta a área de suporte que assenta no modelo" msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4302,11 +4302,11 @@ msgstr "A posição próxima do local onde a impressão de cada parte de uma cam msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "O ângulo preferido dos ramos, quando estes não têm de evitar o modelo. Utilize um ângulo menor para os tornar mais verticais e mais estáveis. Utilize um ângulo maior para que os ramos se unam mais rapidamente." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "O posicionamento preferencial das estruturas de suporte. Se as estruturas não puderem ser posicionadas no local preferido, serão posicionadas noutro local, mesmo que isso signifique assentá-las sobre parte do modelo." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "Isto irá criar uma parede em torno do modelo, que retém o ar (quente) msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "Diâmetro da Ponta do Ramo" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,11 +4822,11 @@ msgstr "Triângulos" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "Diâmetro do Tronco" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" -msgstr "Ultimaker 2" +msgstr "Ultimaker 2" msgctxt "meshfix_union_all label" msgid "Union Overlapping Volumes" @@ -4978,7 +4978,7 @@ msgstr "Os movimentos de deslocação de Combing com uma distância maior que es msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "Quando este valor for superior a zero, a Expansão Horizontal de Buraco é aplicada de forma progressiva nos buracos pequenos (os buracos pequenos serão mais expandidos). Com um valor de zero, a Expansão Horizontal de Buraco será aplicada a todos os buracos. Os buracos maiores que o Diâmetro Máximo de Expansão Horizontal de Buraco não serão expandidos." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/ru_RU/cura.po b/resources/i18n/ru_RU/cura.po index c2c7ce1ec56..a7d7ced3ce0 100644 --- a/resources/i18n/ru_RU/cura.po +++ b/resources/i18n/ru_RU/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/ru_RU/fdmprinter.def.json.po b/resources/i18n/ru_RU/fdmprinter.def.json.po index bf02f188e8e..fc94fc8422e 100644 --- a/resources/i18n/ru_RU/fdmprinter.def.json.po +++ b/resources/i18n/ru_RU/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "Деталь, полностью заключенная внутри д msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "Рекомендация относительно того, как далеко ответвления могут отходить от точек, которые они поддерживают. Ответвления могут нарушать это значение, чтобы добраться до места назначения (рабочей пластины или плоской части модели). Снижение этого значения может сделать поддержку прочнее, но увеличит количество ответвлений (и, как следствие, расход материала и время печати)" msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "Настройте плотность верха и низа струк msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "Регулирует плотность поддержки, используемой для создания кончиков ответвлений. Большее значение приводит к улучшению качества выступов, но такие поддержки сложнее удалять. Используйте крышу поддержки для очень высоких значений или убедитесь, что плотность одинаково высокая сверху." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "Оба варианта" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "Оба пересекаются" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "Толщина дна" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "Плотность ответвлений" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "Диаметр ответвления" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "Угол диаметра ответвления" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "Диаметр" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "Увеличение диаметра до модели" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "Диаметр, которого каждое ответвление пытается достичь при достижении печатной пластины. Улучшает адгезию к столу." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "Горизонтальное расширение отверстия" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "Максимальный диаметр горизонтального расширения отверстия" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "Показывает, насколько материал каждого msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "Как интерфейс поддержки и поддержка будут взаимодействовать при пересечении. В настоящее время реализовано только для крыши поддержки." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "Какой высоты должно быть ответвление, если оно размещено на модели. Предотвращает образование небольших пузырей поддержки. Этот параметр игнорируется, если ответвление поддерживает крышу поддержки." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "Поток низа первого слоя" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "Диаметр первого слоя" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "От внутренних к внешним" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "Предпочитать линии интерфейса" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "Предпочитать интерфейс" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "Начало координат в центре" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "Является поддерживающим материалом" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "Это материал, который при нагревании ле msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "Используется ли обычно этот материал в качестве поддерживающего материала при печати." msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "Угол поддержки шаблона заполнения «мол msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "Ограничить охват ответвлений" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "Ограничьте расстояние, на которое каждое ответвление должно удаляться от опорной точки. Это может сделать поддержку прочнее, но увеличит количество ответвлений (и, как следствие, расход материала и время печати)" msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Максимальное ускорение по оси Z" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "Максимальный угол ответвления" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "Минимальная подача" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "Минимальная высота до модели" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "Смещение с экструдером" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "По возможности на печатной пластине" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "На модели, если требуется" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Дистанция до защиты от капель" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "Оптимальный охват ответвлений" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "Полигоны в разделенных слоях, длина окр msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "Предпочтительный угол ответвления" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "Температура печати первого слоя" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "Печать внутренней линии юбки несколькими слоями позволяет легко ее удалить." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "Заменяет внешнюю часть шаблона крышки/ msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "Предпочтение опоры" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "Дистанция до юбки" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "Высота юбки" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "Температура малослойной печати" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "Маленькая ширина верха/низа" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3038,11 +3038,11 @@ msgstr "Малые элементы будут напечатаны со ско msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "Небольшие области верха/низа заполняются стенками вместо стандартного шаблона верха/низа. Это помогает избежать рывков." msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "Умная кайма" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "Шаблон связующего слоя" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "Приоритет интерфейса поддержки" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "Зазор поддержки по оси Z" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "Предпочитать линии поддержки" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "Предпочитать поддержку" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "Поверхностная энергия." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "Меняет местами порядок печати внутренней и следующей внутренней линий каймы. Это упрощает удаление каймы." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "Диаметр самых тонких ответвлений древо msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "Диаметр верхушек кончиков ответвлений древовидной поддержки." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3998,7 +3998,7 @@ msgstr "Максимальный угол нависания, после кот msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "Максимальный угол наклона ответвлений при их росте вокруг модели. При указании меньшего угла поддержка будет более вертикальной и устойчивой. Для получения большего охвата указывайте более высокий угол." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "Минимальный объём материала на каждый msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "Наибольшее увеличение диаметра ответвления, которое должно быть соединено с моделью, может произойти за счет слияния с ответвлениями, которые могут достигать печатной пластины. Увеличение этого значения сокращает время печати, но увеличивает площадь поддержки, которая опирается на модель" msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4302,11 +4302,11 @@ msgstr "Позиция, рядом с которой следует начина msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "Предпочтительный угол ответвлений, когда им не нужно избегать модели. При указании меньшего угла поддержка будет более вертикальной и устойчивой. Используйте больший угол, чтобы ветки сливались быстрее." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "Предпочтительное размещение поддерживающих конструкций. Если структуры не могут быть размещены в предпочтительном месте, они будут размещены в другом месте, даже если это приведет к их размещению на модели." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "Создаёт стенку вокруг модели, которая у msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "Диаметр кончика" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,7 +4822,7 @@ msgstr "Треугольники" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "Диаметр ствола" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4978,7 +4978,7 @@ msgstr "При значении параметра выше нуля перем msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "Если значение больше нуля, то горизонтальное расширение отверстия постепенно применяется к маленьким отверстиям (маленькие отверстия расширяются больше). Если установлено нулевое значение, то горизонтальное расширение отверстия будет применено ко всем отверстиям. Отверстия, превышающие максимальный диаметр горизонтального расширения отверстия, не расширяются." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/tr_TR/cura.po b/resources/i18n/tr_TR/cura.po index e885959fbe7..c5207336513 100644 --- a/resources/i18n/tr_TR/cura.po +++ b/resources/i18n/tr_TR/cura.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/resources/i18n/tr_TR/fdmprinter.def.json.po b/resources/i18n/tr_TR/fdmprinter.def.json.po index 15d3852c988..e63cd0efa57 100644 --- a/resources/i18n/tr_TR/fdmprinter.def.json.po +++ b/resources/i18n/tr_TR/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "Bir başka parçanın içine tamamen kapatılmış bir parça, diğer pa msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "Dalların destekledikleri noktalardan ne kadar uzağa hareket edebileceğine dair bir tavsiye. Dallar hedeflerine (yapı levhası veya modelin düz bir parçası) ulaşmak için bu değeri ihlal edebilir. Bu değeri düşürmek, desteği daha sağlam hale getirecek, ancak dal miktarını (ve bu nedenle, malzeme kullanımı/baskı süresini) artıracaktır" msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "Destek yapısının çatılarının ve zeminlerinin yoğunluğunu ayarla msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "Dalların uçlarını oluşturmak için kullanılan destek yapısının yoğunluğunu ayarlar. Daha yüksek bir değer daha iyi çıkıntılar sağlar, ancak desteklerin çıkarılması daha zordur. Çok yüksek değerler için Destek Çatısı’nı kullanın veya destek yoğunluğunun en üstte benzer şekilde yüksek olmasını sağlayın." msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "Her İkisi" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "Her ikisi de çakışıyor" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "Alt Kalınlık" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "Dal Yoğunluğu" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "Dal Çapı" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "Dal Çapı Açısı" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "Çap" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "Modele Göre Çap Artışı" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "Her dalın yapı levhasına ulaşırken elde etmeye çalıştığı çap. Yatak yapışmasını geliştirir." msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "Delik Yatay Büyüme" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "Delik Yatay Büyüme Maksimum Çapı" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "Printer-start gcode betiğinin tamamlanmasında her bir ekstrüder filam msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "Destek arayüzü ve destek çakıştıklarında nasıl etkileşime girerler? Şu anda sadece destek çatısı için uygulanmaktadır." msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "Model üzerine yerleştirilmesi gereken bir dalın ne kadar uzun olması gerektiği. Küçük destek lekelerini önler. Bir dalın bir destek çatısını desteklemesi durumunda bu ayar göz ardı edilir." msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "İlk Katman Alt Akışı" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "İlk Katman Çapı" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "İçten Dışa" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "Tercih edilen arayüz hatları" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "Tercih edilen arayüz" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "Merkez Nokta" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "Destek malzemesi mi" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "Bu malzeme ısıtıldığında temiz bir şekilde parçalanan tür de mi msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "Bu malzeme genellikle baskı sırasında destek malzemesi olarak mı kullanılır" msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "Yıldırım Dolgu Destek Açısı" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "Dal Erişimini Sınırla" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "Her dalın desteklediği noktadan ne kadar uzağa gitmesi gerektiğini sınırlayın. Bu sınırlama, desteği daha sağlam hale getirebilir, ancak dalların miktarını (ve bu nedenle, malzeme kullanımı/baskı süresini) artıracaktır" msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Maksimum Z İvmesi" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "Maksimum Dal Açısı" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "Minimum Besleme Hızı" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "Modele Göre Minimum Yükseklik" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "Ekstruder Ofseti" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "Mümkün olduğunda yapı levhası üzerinde" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "Gerektiğinde model üzerinde" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "Sızdırma Kalkanı Mesafesi" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "Optimum Dal Aralığı" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "Bu miktardan daha kısa çevre uzunluğuna sahip dilimlenmiş katmanlard msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "Tercih Edilen Dal Açısı" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "İlk Katman Yazdırma Sıcaklığı" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "En içteki etek çizgisinin birden fazla katmanla yazdırılması, eteğin çıkarılmasını kolaylaştırır." msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "Üst/alt şeklin en dıştaki parçasını eş merkezli hatlar ile deği msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "Yerleştirme Tercihi" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "Etek Mesafesi" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "Etek Yüksekliği" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "Küçük Katman Yazdırma Sıcaklığı" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "Küçük Üst/​Alt Genişlik" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3038,11 +3038,11 @@ msgstr "Küçük özellikler normal baskı hızının bu yüzdesinde basılacakt msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "Küçük üst/alt bölgeler varsayılan üst/alt deseni yerine duvarlarla doldurulur. Bu, sarsıntılı hareketlerden kaçınmaya yardımcı olur." msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "Akıllı Kenar" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "Destek Arayüzü Şekli" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "Destek Arayüzü Önceliği" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "Destek Z Mesafesi" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "Tercih edilen destek hatları" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "Tercih edilen destek" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "Yüzey enerjisi." msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "En içteki ve ikinci en içteki kenar çizgilerinin baskı sırasını değiştirin. Bu, kenarın çıkarılmasını kolaylaştırır." msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "Ağaç desteğin en ince dallarının çapı. Daha kalın dallar daha da msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "Ağaç desteğinin dallarının ucunun en üstteki çapı." msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3998,7 +3998,7 @@ msgstr "Yazdırılabilir yapıldıktan sonra çıkıntıların en büyük açıs msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "Dalların modelin etrafında büyürken aldıkları maksimum açı. Daha dikey ve daha dengeli hale getirmek için daha düşük bir açı kullanın. Daha fazla erişim için daha yüksek bir açı kullanın." msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "Yeterince malzeme temizlemek için ilk direğin her bir katmanı için m msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "Modele bağlanması gereken dalın çapının, yapı levhasına erişebilecek dallarla birleşerek en fazla ne kadar artabileceği. Bunu artırmak baskı süresini azaltır, ancak modele dayanan destek alanını artırır" msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4302,11 +4302,11 @@ msgstr "Bir katmandaki her kısmın basılmaya başlanacağı yere yakın konum. msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "Modelden kaçınmak zorunda olmadıklarında dalların tercih edilen açısı. Daha dikey ve daha dengeli hale getirmek için daha düşük bir açı kullanın. Dalların daha hızlı birleşmesi için daha yüksek bir açı kullanın." msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "Destek yapılarının tercih edilen yerleşimi. Yapılar tercih edilen yere yerleştirilemiyorsa başka bir yere yerleştirilecektir. Bu, onları modelin üzerine yerleştirmek anlamına da gelebilir." msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "Modelin etrafında (sıcak) hava ve kalkanlara dışarıdaki hava akım msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "Uç Çapı" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,7 +4822,7 @@ msgstr "Üçgenler" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "Gövde Çapı" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4978,7 +4978,7 @@ msgstr "Sıfırdan büyük olduğunda, bu mesafeden daha uzun tarama mesafelerin msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "Sıfırdan büyük olduğunda, Delik Yatay Büyüme küçük deliklere kademeli olarak uygulanır (küçük delikler daha fazla büyütülür). Sıfır olarak ayarlandığında Delik Yatay Büyüme tüm deliklere uygulanacaktır. Delik Yatay Büyüme Maksimum Çapı’ndan daha büyük delikler genişletilmez." msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/zh_CN/cura.po b/resources/i18n/zh_CN/cura.po index 32f566e3152..52d4b7606e8 100644 --- a/resources/i18n/zh_CN/cura.po +++ b/resources/i18n/zh_CN/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: 2022-07-15 11:06+0200\n" "Last-Translator: \n" "Language-Team: \n" diff --git a/resources/i18n/zh_CN/fdmprinter.def.json.po b/resources/i18n/zh_CN/fdmprinter.def.json.po index e92398f317f..96fa52ab869 100644 --- a/resources/i18n/zh_CN/fdmprinter.def.json.po +++ b/resources/i18n/zh_CN/fdmprinter.def.json.po @@ -62,7 +62,7 @@ msgstr "一个零件完全封闭在另一个零件内部会生成与另一个零 msgctxt "support_tree_branch_reach_limit description" msgid "A recomendation to how far branches can move from the points they support. Branches can violate this value to reach their destination (buildplate or a flat part of the model). Lowering this value will make the support more sturdy, but increase the amount of branches (and because of that material usage/print time) " -msgstr "" +msgstr "建议分支离从其支撑点移动的距离。分支可以违反此值以到达其目的地（打印平台或模型的平面部分）。降低此值可以使支撑更坚固，但会增加分支数量（进而增加材料的使用/打印时间）" msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" @@ -118,7 +118,7 @@ msgstr "调整支撑结构顶板和底板的密度。 较高的值会实现更 msgctxt "support_tree_top_rate description" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs, but the supports are harder to remove. Use Support Roof for very high values or ensure support density is similarly high at the top." -msgstr "" +msgstr "调整用于生成分支顶端的支撑结构的密度。高数值可以确保悬垂质量更好，但支撑结构会更难去除。用支撑顶板获取极高数值，或者确保顶层的支撑密度同样高。" msgctxt "support_infill_rate description" msgid "Adjusts the density of the support structure. A higher value results in better overhangs, but the supports are harder to remove." @@ -266,7 +266,7 @@ msgstr "两者都" msgctxt "support_interface_priority option nothing" msgid "Both overlap" -msgstr "" +msgstr "两者重叠" msgctxt "bottom_layers label" msgid "Bottom Layers" @@ -290,15 +290,15 @@ msgstr "底层厚度" msgctxt "support_tree_top_rate label" msgid "Branch Density" -msgstr "" +msgstr "分支密度" msgctxt "support_tree_branch_diameter label" msgid "Branch Diameter" -msgstr "" +msgstr "分支直径" msgctxt "support_tree_branch_diameter_angle label" msgid "Branch Diameter Angle" -msgstr "" +msgstr "分支直径角度" msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" @@ -710,11 +710,11 @@ msgstr "直径" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model label" msgid "Diameter Increase To Model" -msgstr "" +msgstr "扩大直径以匹配模型" msgctxt "support_tree_bp_diameter description" msgid "Diameter every branch tries to achieve when reaching the buildplate. Improves bed adhesion." -msgstr "" +msgstr "接触打印平台时，每个分支可能达到的直径。提高床附着力。" msgctxt "adhesion_type description" msgid "Different options that help to improve both priming your extrusion and adhesion to the build plate. Brim adds a single layer flat area around the base of your model to prevent warping. Raft adds a thick grid with a roof below the model. Skirt is a line printed around the model, but not connected to the model." @@ -1298,7 +1298,7 @@ msgstr "孔洞水平扩展" msgctxt "hole_xy_offset_max_diameter label" msgid "Hole Horizontal Expansion Max Diameter" -msgstr "" +msgstr "孔洞水平扩展最大直径" msgctxt "small_hole_max_size description" msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed." @@ -1378,11 +1378,11 @@ msgstr "假定在打印机启动 gcode 脚本完成后，每个挤出器的细 msgctxt "support_interface_priority description" msgid "How support interface and support will interact when they overlap. Currently only implemented for support roof." -msgstr "" +msgstr "重叠时支撑接触面和支撑的交互方式。目前仅对支撑顶板实施。" msgctxt "support_tree_min_height_to_model description" msgid "How tall a branch has to be if it is placed on the model. Prevents small blobs of support. This setting is ignored when a branch is supporting a support roof." -msgstr "" +msgstr "将分支放在模型上时，分支的必要高度。防止出现小的支撑光点。分支支撑着支撑顶板时，此设置将被忽略。" msgctxt "bridge_skin_support_threshold description" msgid "If a skin region is supported for less than this percentage of its area, print it using the bridge settings. Otherwise it is printed using the normal skin settings." @@ -1530,7 +1530,7 @@ msgstr "起始层底部流量" msgctxt "support_tree_bp_diameter label" msgid "Initial Layer Diameter" -msgstr "" +msgstr "起始层直径" msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" @@ -1634,11 +1634,11 @@ msgstr "从内到外" msgctxt "support_interface_priority option interface_lines_overwrite_support_area" msgid "Interface lines preferred" -msgstr "" +msgstr "偏好接触面走线" msgctxt "support_interface_priority option interface_area_overwrite_support_area" msgid "Interface preferred" -msgstr "" +msgstr "偏好接触面" msgctxt "interlocking_beam_layer_count label" msgid "Interlocking Beam Layer Count" @@ -1698,7 +1698,7 @@ msgstr "位于中心" msgctxt "material_is_support_material label" msgid "Is support material" -msgstr "" +msgstr "支撑材料" msgctxt "material_crystallinity description" msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?" @@ -1706,7 +1706,7 @@ msgstr "该材料为受热后脱落干净的类型（晶体），还是会产生 msgctxt "material_is_support_material description" msgid "Is this material typically used as a support material during printing." -msgstr "" +msgstr "这种材料通常被用作打印的支撑材料吗" msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." @@ -1774,11 +1774,11 @@ msgstr "闪电形填充支撑角" msgctxt "support_tree_limit_branch_reach label" msgid "Limit Branch Reach" -msgstr "" +msgstr "限制分支长度" msgctxt "support_tree_limit_branch_reach description" msgid "Limit how far each branch should travel from the point it supports. This can make the support more sturdy, but will increase the amount of branches (and because of that material usage/print time)" -msgstr "" +msgstr "限制每个分支从其支撑点移动的距离。这样可以使支撑更坚固，但会增加分支的数量（进而增加材料的使用/打印时间）" msgctxt "cutting_mesh description" msgid "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder." @@ -1930,7 +1930,7 @@ msgstr "Z 轴最大加速度" msgctxt "support_tree_angle label" msgid "Maximum Branch Angle" -msgstr "" +msgstr "最大分支角度" msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" @@ -2086,7 +2086,7 @@ msgstr "最小进料速率" msgctxt "support_tree_min_height_to_model label" msgid "Minimum Height To Model" -msgstr "" +msgstr "模型的最小高度" msgctxt "min_infill_area label" msgid "Minimum Infill Area" @@ -2338,11 +2338,11 @@ msgstr "挤出机偏移量" msgctxt "support_tree_rest_preference option buildplate" msgid "On buildplate when possible" -msgstr "" +msgstr "在打印平台上（如可能）" msgctxt "support_tree_rest_preference option graceful" msgid "On model if required" -msgstr "" +msgstr "在模型上（如需要）" msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" @@ -2370,7 +2370,7 @@ msgstr "渗出罩距离" msgctxt "support_tree_branch_reach_limit label" msgid "Optimal Branch Range" -msgstr "" +msgstr "最佳分支范围" msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" @@ -2458,7 +2458,7 @@ msgstr "切片层中周长小于此数值的多边形将被滤除。以切片时 msgctxt "support_tree_angle_slow label" msgid "Preferred Branch Angle" -msgstr "" +msgstr "偏好分支角度" msgctxt "wall_transition_filter_deviation description" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of line widths which follow to [Minimum Wall Line Width - Margin, 2 * Minimum Wall Line Width + Margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large line width variation can lead to under- or overextrusion problems." @@ -2578,7 +2578,7 @@ msgstr "打印温度起始层" msgctxt "skirt_height description" msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt." -msgstr "" +msgstr "多层打印最内层裙边走线，便于移除裙边。" msgctxt "alternate_extra_perimeter description" msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints." @@ -2818,7 +2818,7 @@ msgstr "用多个同心线代替顶部/底部图案的最外面部分。 使用 msgctxt "support_tree_rest_preference label" msgid "Rest Preference" -msgstr "" +msgstr "停留偏好" msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" @@ -2966,7 +2966,7 @@ msgstr "Skirt 距离" msgctxt "skirt_height label" msgid "Skirt Height" -msgstr "" +msgstr "裙边高度" msgctxt "skirt_line_count label" msgid "Skirt Line Count" @@ -3026,7 +3026,7 @@ msgstr "小型层打印温度" msgctxt "small_skin_width label" msgid "Small Top/Bottom Width" -msgstr "" +msgstr "顶宽/底宽较小" msgctxt "small_feature_speed_factor_0 description" msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy." @@ -3038,11 +3038,11 @@ msgstr "微小特征将按正常打印速度的百分比进行打印。缓慢打 msgctxt "small_skin_width description" msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions." -msgstr "" +msgstr "顶层/底层区域较小时，用墙体填充，而不是默认的顶层/底层图案。这样可以避免抖动。" msgctxt "brim_smart_ordering label" msgid "Smart Brim" -msgstr "" +msgstr "智能边缘" msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" @@ -3282,7 +3282,7 @@ msgstr "支撑接触面图案" msgctxt "support_interface_priority label" msgid "Support Interface Priority" -msgstr "" +msgstr "支撑接触面优先级" msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" @@ -3422,11 +3422,11 @@ msgstr "支撑 Z 距离" msgctxt "support_interface_priority option support_lines_overwrite_interface_area" msgid "Support lines preferred" -msgstr "" +msgstr "偏好支撑线" msgctxt "support_interface_priority option support_area_overwrite_interface_area" msgid "Support preferred" -msgstr "" +msgstr "偏好支撑" msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" @@ -3454,7 +3454,7 @@ msgstr "表面能。" msgctxt "brim_smart_ordering description" msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal." -msgstr "" +msgstr "变换最内层和第二内层侧裙走线的打印顺序。这样可改善侧裙移除。" msgctxt "alternate_carve_order description" msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes." @@ -3678,7 +3678,7 @@ msgstr "树形支撑最细分支的直径。较粗的分支更坚固。接近基 msgctxt "support_tree_tip_diameter description" msgid "The diameter of the top of the tip of the branches of tree support." -msgstr "" +msgstr "树形支撑的分支顶端的直径。" msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." @@ -3998,7 +3998,7 @@ msgstr "在悬垂变得可打印后悬垂的最大角度。 当该值为 0° 时 msgctxt "support_tree_angle description" msgid "The maximum angle of the branches while they grow around the model. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "围绕模型扩大时，分支的最大角度。使用较小的角度可增加垂直度和稳定性。使用较大的角度可支撑更多结构。" msgctxt "conical_overhang_hole_size description" msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable. Holes smaller than this will be retained. A value of 0 mm² will fill all holes in the models base." @@ -4174,7 +4174,7 @@ msgstr "为了清除足够的材料，装填塔每层的最小体积。" msgctxt "support_tree_max_diameter_increase_by_merges_when_support_to_model description" msgid "The most the diameter of a branch that has to connect to the model may increase by merging with branches that could reach the buildplate. Increasing this reduces print time, but increases the area of support that rests on model" -msgstr "" +msgstr "与接触打印平台的分支合并时，模型必连分支的最大直径可能会扩大。扩大直径可减少打印时间，但会增加模型上的支撑区域" msgctxt "machine_name description" msgid "The name of your 3D printer model." @@ -4302,11 +4302,11 @@ msgstr "在该位置附近开始打印层中各个部分。" msgctxt "support_tree_angle_slow description" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "" +msgstr "不必避开模型时，分支的偏好角度。使用较小的角度可增加垂直度和稳定性。使用较大的角度可以更快合并分支。" msgctxt "support_tree_rest_preference description" msgid "The preferred placement of the support structures. If structures can't be placed at the preferred location, they will be place elsewhere, even if that means placing them on the model." -msgstr "" +msgstr "支撑结构的偏好位置。只要结构不在偏好位置，它们就可能被放在其他区域，即使这意味着它们可能被放在模型上。" msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." @@ -4638,7 +4638,7 @@ msgstr "这将在模型周围创建一个壁，该壁会吸住（热）空气并 msgctxt "support_tree_tip_diameter label" msgid "Tip Diameter" -msgstr "" +msgstr "顶端直径" msgctxt "material_shrinkage_percentage_xy description" msgid "To compensate for the shrinkage of the material as it cools down, the model will be scaled with this factor in the XY-direction (horizontally)." @@ -4822,7 +4822,7 @@ msgstr "三角形" msgctxt "support_tree_max_diameter label" msgid "Trunk Diameter" -msgstr "" +msgstr "主干直径" msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" @@ -4978,7 +4978,7 @@ msgstr "当大于零时，比这段距离更长的梳理空驶将会使用回抽 msgctxt "hole_xy_offset_max_diameter description" msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded." -msgstr "" +msgstr "大于零时，孔洞水平扩展会逐渐适应小孔洞（小孔洞可以扩展更多）。设为零时，孔洞水平扩展可以应用于所有孔洞。大于孔洞水平扩展最大直径时，孔洞不会被扩展。" msgctxt "bridge_skin_material_flow description" msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value." diff --git a/resources/i18n/zh_TW/cura.po b/resources/i18n/zh_TW/cura.po index 10aaf168f6e..ad0a8b403cb 100644 --- a/resources/i18n/zh_TW/cura.po +++ b/resources/i18n/zh_TW/cura.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-06-15 13:37+0000\n" +"POT-Creation-Date: 2023-07-06 14:20+0000\n" "PO-Revision-Date: 2022-01-02 19:59+0800\n" "Last-Translator: Valen Chang \n" "Language-Team: Valen Chang \n" diff --git a/resources/qml/ActionPanel/PrintJobInformation.qml b/resources/qml/ActionPanel/PrintJobInformation.qml index d142335d419..9d4f23346c5 100644 --- a/resources/qml/ActionPanel/PrintJobInformation.qml +++ b/resources/qml/ActionPanel/PrintJobInformation.qml @@ -117,7 +117,7 @@ Column property var printMaterialWeights: PrintInformation.materialWeights property var printMaterialCosts: PrintInformation.materialCosts property var printMaterialNames: PrintInformation.materialNames - property var columnWidthMultipliers: [ 0.46, 0.18, 0.18, 0.18 ] + property var columnWidthMultipliers: [ 0.26, 0.28, 0.18, 0.28 ] property var columnHorizontalAligns: [ Text.AlignLeft, Text.AlignHCenter, Text.AlignHCenter, Text.AlignRight ] function getMaterialTable() diff --git a/resources/texts/change_log.txt b/resources/texts/change_log.txt index 13c567e2457..bc7befbb8a7 100644 --- a/resources/texts/change_log.txt +++ b/resources/texts/change_log.txt @@ -13,9 +13,9 @@ Try it for yourself with this Cura Cookie Cutter. -* Other new features and improvements: +* New features and improvements: - Updated the UltiMaker logo to reflect the new company logo - Added support for the updated mainboard revisions of UltiMaker S3, S5, and S7 - Introduced Hole Horizontal Expansion Max Diameter so only the expansion of smaller holes can be tuned while leaving larger holes untouched. @@ -27,8 +27,7 @@ Introduced the Smart Brim setting that changes the order in which the brim lines - Removed the settings related to Wire Printing since it was broken and barely used. - Upgraded PyQt to version 6.4.2 which improves responsiveness in the UI -* Other Bug Fixes -- Fixed a bug where undesirable micro segments would introduce jagged paths on curved surfaces. +* Bug Fixes - Fixed a bug where the brim line would not be printed in the same orientation - Fixed a bug where models dropped to the buildplate when they were supposed to be floating - Fixed a bug where models would overlap if multiple models were loaded at the same time @@ -42,8 +41,19 @@ Introduced the Smart Brim setting that changes the order in which the brim lines - Fixed AppImage Icon for Linux systems, contributed by @leoheck - Fixed a bug where the buildplate temperature in the USB printing monitor was not rounded, contributed by @asteroids1975 - Fixed a bug where retracting for Filament Change was not performed correctly because of an extra /n in the gcode. Contributed by @JuanManuelCuello - -* Printer definitions, profiles and materials: +- Fixed a bug where the material estimation would not show currencies correctly. Contributed by @Diegovd + +* Bugs resolved since the Beta Release +- Fixed a bug where undesirable micro-segments would introduce jagged paths on curved surfaces. +- Fixed a bug where it was not possible to use custom support and brim meshes +- Fixed a bug Cura would not start when upgrading from a Cura 5.4 Nightly +- Fixed a bug where Connect Top/Bottom Polygons would cause a slicing crash +- Fixed a bug where generic materials were missing for some printers +- Fixed a bug where Support Horizontal Expansion would be incorrectly applied to tree supports +- Fixed a bug where nozzles were missing from the Elegoo Neptune 3 Plus. Contributed by @GregValiant + +* Printer definitions, profiles, and materials: +- Introduced UltiMaker PET CF with Annealing and Engineering intents - Updated Infill- and Skin Overlap settings for UltiMaker printers - Enabled a modest Support Brim by default for UltiMaker printers - Updated Support Interface speeds for PVA for UltiMaker printers @@ -60,6 +70,17 @@ Introduced the Smart Brim setting that changes the order in which the brim lines - Updated Creality 3 S1, Creality 3 S1 Plus, and Creality 3 S1 Pro, contributed by @sparkym3 - Updated Cremaker profile to remove material temperature boost, contributed by @hyu7000 +* Community translations: +- Updated Brazilian translations, contributed by @Patola + +* Known critical issues: +- Support Brim is missing if the Buildplate Adhesion is set to None. We are tracking reports here. +- Hide seam is actually not hidden and can give random results, for now changing the Seam Corner Preference to None will give better results. We are tracking reports here. +- Combing Not In Skin can result in unexpected stringing. We are tracking reports here. +- Multiple external monitors on Windows (especially if from the same brand) might be a problem under some circumstances. +- Does Cura (not) work on your OS (version)? See this article for clarification. + + [5.3.1] diff --git a/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.20.inst.cfg b/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.20.inst.cfg index 502b18c49a6..ef39a4560f0 100644 --- a/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.20.inst.cfg +++ b/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.20.inst.cfg @@ -1,5 +1,5 @@ [general] -definition = elegoo_neptune_3max +definition = elegoo_neptune_3plus name = 0.20mm_Elegoo_Nozzle version = 4 diff --git a/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.40.inst.cfg b/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.40.inst.cfg index 8e5aa468d8a..4331b27eda0 100644 --- a/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.40.inst.cfg +++ b/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.40.inst.cfg @@ -1,5 +1,5 @@ [general] -definition = elegoo_neptune_3max +definition = elegoo_neptune_3plus name = 0.40mm_Elegoo_Nozzle version = 4 diff --git a/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.60.inst.cfg b/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.60.inst.cfg index 58dd28cbc1f..7d518a6df6f 100644 --- a/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.60.inst.cfg +++ b/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.60.inst.cfg @@ -1,5 +1,5 @@ [general] -definition = elegoo_neptune_3max +definition = elegoo_neptune_3plus name = 0.60mm_Elegoo_Nozzle version = 4 diff --git a/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.80.inst.cfg b/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.80.inst.cfg index 669d7207e54..c5183f0e7d8 100644 --- a/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.80.inst.cfg +++ b/resources/variants/elegoo/elegoo_neptune_3plus/elegoo_neptune_3plus_0.80.inst.cfg @@ -1,5 +1,5 @@ [general] -definition = elegoo_neptune_3max +definition = elegoo_neptune_3plus name = 0.80mm_Elegoo_Nozzle version = 4