Skip to content

Latest commit

 

History

History
227 lines (161 loc) · 11.9 KB

README_Building.md

File metadata and controls

227 lines (161 loc) · 11.9 KB
Raw

Building

Under Linux

Espruino is easy to build under Linux, and it is possible to build under MacOS with some effort. If you don't have Linux it's much easier to install it in a Virtual Machine. See the heading Building under Windows/MacOS with a VM below for more information.

for STM32 Boards (incl. Espruino Board)

The (previously suggested) CodeSourcery GCC compiler is no longer available. We'd suggest you use gcc-arm-none-eabi.

Download the compiler, set up your path so you have access to it, and run:

YOUR_BOARD_NAME=1 RELEASE=1 make

  • See the top of Makefile for board names
  • Without RELEASE=1, assertions are kept in the code (which is good for debugging, bad for performance + code size)
  • BOARDNAME=1 RELEASE=1 make serialflash will flash to /dev/ttyUSB0 using the STM32 serial bootloader (what's needed for the Espruino and HY boards)
  • BOARDNAME=1 RELEASE=1 make flash will flash using st-flash if it's a discovery board, the maple bootloader if using that board, or will copy the binary to /media/NUCLEO if using a Nucleo board.

It may complain that there isn't enough space on the chip. This isn't an issue unless you save to flash, but you can fix the error in a few ways:

  • Disable the check by adding TRAVIS=1
  • Change the compile flags from -O3 to -Os in the Makefile
  • Knock out some functionality (like USE_GRAPHICS=1) that you don't need in the Makefile
  • Try different compilers. codesourcery-2013.05-23-arm-none-eabi provides low binary size for -O3

Note: Espruino boards contain a special bootloader at 0x08000000 (the default address), with the Espruino binary moved on 10240 bytes to 0x08002800. To load the Espruino binary onto a board at the correct address, use ESPRUINO_1V3=1 RELEASE=1 make serialflash. If you want to make a binary that contains the bootloader as well as Espruino (like the ones that the Espruino Web IDE expects to use) use the script scripts/create_espruino_image_1v3.sh which will compile the bootloader and Espruino, and then join them together.

for Nordic Semiconductor's nRF51/nRF52 series devices

The (previously suggested) CodeSourcery GCC compiler is no longer available. We'd suggest you use gcc-arm-none-eabi.

Download the compiler, set up your path so you have access to it, and run:

NRF52832DK=1 RELEASE=1 make

Note: This is for the nRF52 devkit, use NRF51822DK=1 instead for the nRF51 devkit, MICROBIT=1 for the BBC micro:bit, or check the first 50-ish lines of the Makefile for more board options.

To program the nRF52 Development Kit with Espruino, type NRF52832DK=1 RELEASE=1 make flash on Linux. This will copy the generated espruino_xx.xx_nrf52832.hex file to the nRF devkit's USB flash drive - you can however do that manually if you want to.

Now Espruino is ready to use - you can either use the Web IDE to connect, or you can use any serial terminal application as long as you connect at 9600 baud (no parity, 1 stop bit).

You can also connect via Bluetooth Low energy - the board will appear as Espruino XYZ where XYZ is the board name:

  • Use the Nordic UART Android app - install it, connect to the device, and then issue commands. Note that you will have to explicitly send a Carriage Return at the end of any command in order or it to execute (eg. 1+2 [newline] then click send)

  • Use Web Bluetooth - see The BBC micro:bit page for more information about this.

for esp8266

In order to compile for the esp8266 on Linux several pre-requisites have to be installed:

To run make you need to pass a couple of environment variables to make. These include:

  • ESP8266_BOARD=1
  • FLASH_4MB=1 if you have an esp-12
  • ESP8266_SDK_ROOT=<Path to the 1.4 SDK>
  • PATH=<Path to esp-open-sdk/xtensa-lx106-elf/bin/>
  • COMPORT=</dev/ttyUSB0|COM1|...>

The easiest is to place the following lines into a script, adapt it to your needs and then run it.

#! /bin/bash
export ESP8266_BOARD=1
export FLASH_4MB=1
export ESP8266_SDK_ROOT=/esp8266/esp_iot_sdk_v1.5.0
export PATH=$PATH:/esp8266/esp-open-sdk/xtensa-lx106-elf/bin/
export COMPORT=/dev/ttyUSB0
make $*
  • If you do make flash it will try to flash your esp8266 module over serial
  • If you do make wiflash it will try to flash you esp8266 module over wifi, which assumes that it's already running Espruino
  • You will also get an espruino_1v00_*_esp8266.tgz archive, which contains everything you need to flash a module (except for esptool.py), including a README_flash.txt

####Building on Eclipse When building on Eclipse, update the Makefile properties to include the definitions show above. The easiest way to achieve that task is to right-click your Espruino project and select properties. From there, navigate to C/C++ Build > Environment.

for EMW3165

Note: the emw3165 port is very preliminary and does not include Wifi support at this time. The text below is what is planned in order to support Wifi, but it doesn't exist yet.

The EMW3165 port uses WICED, which is an application framework provided by Broadcom for its wifi chips, such as the BCM43362 used in the EMW3165 module. The module consists of an STM32F411CE processor and the BCM43362. The WICED framework comes with everything and the kitchen sink plus a rather complex build process in order to support umpteen different processor and wifi chip combinations, plus various use-cases. WICED includes FreeRTOS and LwIP plus proprietary code to manage the Wifi chip.

The strategy employed is to compile portions of WICED into a library using the WICED toolchain and then linking this into Espruino.

Setting up WICED:

  • WICED does not officially support the EMW3165.
  • Clone https://github.com/MXCHIP-EMW/WICED-for-EMW and follow the instructions there to configure WICED and build it. (You will need to sign up for a developer acct with Broadcom.)
  • Build the apsta sample program (snippet) using a command-line like ./make EMW3165-FreeRTOS-LwIP-snip.apsta download run JTAG=stlink-v2
  • Hook up your emw3165 to an ST-Link-v2 or your preferred STM32 programmer and flash using the above command-line. You should see the EMW's access point.
  • An alternative program to test with is the "scan" snip as it will also print something on the console (works well with the WifiMCU board): ./make EMW3165-FreeRTOS-LwIP-snip.scan ...

Compiling WICED into a library:

  • ... if only this worked ...

Compiling Espruino:

  • To compile Espruino you will need to point to the WICED root and include files. This is done by specifying a WICED_ROOT environment variable.
  • Adapt the pathnames from the following script:
  WICED_ROOT=/home/emw3165/WICED-for-EMW/WICED-SDK-3.3.1 make $*

for Linux

Simple: Just run make

for Raspberry Pi

On the Pi, just run make.

Or to cross-compile:

cd targetlibs
mkdir raspberrypi
cd raspberrypi
git clone git://github.com/raspberrypi/tools.git
sudo apt-get install ia32-libs

for Carambola (OpenWRT)

To cross compile,

Documentation

python scripts/build_docs.py

This will create a file called functions.html that is a version of the reference pages, but based on your source code.

Building under Windows/MacOS with a VM (Vagrant)

  • Clone this repository.
  • Download and install the correct VirtualBox for your platform. eg. If you have Windows, download 'VirtualBox for Windows Hosts'.
  • Download and install the correct Vagrant for your platform.

    If running on MacOS, the two previous steps can be accomplished easily with Homebrew Cask: brew cask install virtualbox vagrant will do it.

  • In your terminal application, navigate to your cloned working copy.
  • Install the auto-network plugin with vagrant plugin install vagrant-auto_network
  • Execute vagrant up. This will take a little while while the box is downloaded, and your virtual machine is provisioned.
  • When it is complete, execute vagrant ssh, which will open an ssh session into your new VM.
  • Execute cd /vagrant && ESPRUINO_1V3=1 RELEASE=1 make and wait.
  • Espruino is now built. See the documentation under Building under Linux for more examples.
  • To terminate the ssh session, simply execute exit.
  • vagrant suspend will pause the VM, vagrant halt will stop it, and vagrant up will bring it back up again. See Vagrant's "Getting Started" page for further information.

Building under Windows/MacOS with a VM

  • Download and install the correct VirtualBox for your platform. eg. If you have Windows, download 'VirtualBox for Windows Hosts'.
  • Download the Ubuntu 14.04 32 bit Desktop ISO Image
  • Run VirtualBox, and click the 'New' button
  • Give the new OS a name, choose Linux as the type, and Ubuntu (32 bit) as the version
  • Click Next, choose 2048MB of memory, and not to create a hard disk image (ignore the warning). Note: We're going to run Ubuntu right from the virtual CD without installing (because it's a bit faster and easier). If you have time you might want to create a hard disk image (you won't need as much memory then) and then choose to install Ubuntu when given the chance.
  • Click start, and when prompted for a CD image choose the Ubuntu ISO you downloaded
  • Wait until a picture of a keyboard appears at the bottom of the screen, then press enter
  • Select a language, and then choose Try Ubuntu with the arrow keys
  • When it's booted, press Alt-F2, type gnome-terminal, then enter. Note: You could also just press Ctrl-Alt-F2 to get a faster but less shiny-looking terminal window.
  • In the terminal, type: sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded and press enter when prompted
  • Type sudo apt-get update
  • Type sudo apt-get install gcc-arm-none-eabi git and press 'Y' if prompted
  • Type git clone https://github.com/espruino/Espruino.git
  • Type cd Espruino
  • Type ESPRUINO_1V3=1 RELEASE=1 make and wait
  • Espruino is now built. See the documentation under Building under Linux for more examples.
  • When you exit the VM, make sure you choose Save State. If you Power Off you will lose everything you've done so far.

There's some more information on how to do this on the forum at http://forum.espruino.com/conversations/151 including links to a pre-made Amazon EC2 instance.

To flash Espruino from the VM

  • Plug the Espruino board in while holding BTN1, and wait for Windows to finish connecting to the USB device
  • Go into the VirtualBox Manager (There's no need to stop your VM)
  • Click on USB, then click on the icon with the + sign (With the tooltip 'Adds a new USB filter ... selected USB device')
  • Click on the device labelled STMicroelectronics STM32 ...
  • Now unplug the Espruino board, wait a few seconds, and plug it back in (holding BTN1 again)
  • Go back into the VM, and type sudo ESPRUINO_1V3=1 RELEASE=1 make serialflash
  • Your board will now be flashed

Note: if you want to you can change permissions so you don't need sudo by typing sudo cp misc/45-espruino.rules /etc/udev/rules.d;sudo udevadm control --reload-rules and then re-inserting the board.