New Version 2.3.0 with iRT read capabilities

[harrymayr]

Hi Victor,

I decided to focus my work more on the latest EMS8266 version of proddy. And here is the result. Code and release can be found on https://github.com/harrymayr/EMS-iRT-ESP/releases/tag/v2.3.0 .

For now, only reading telegrams is possible, but the next step will be the ability to write iRT telegrams.
Let's see what else I can add, memory is an issue with this version and ESP8266 😟

Best regards and have a great weekend 🎄,

Harry

[erhapp]

Great news. I'm personally waiting for a version that can control the free GPIO pin on the BBQKees board. That way it wil become possible to switch between active and passive mode by opening or closing a relay and connecting the thermostat.

[harrymayr]

Hi erhapp,
do you mean the GPIO pin which is used for the Dallas sensors? If not, please let me know which pin so I can add this functionality. (list picked up from upgrade page of bbqkees).

[erhapp]

The 1.7 version of the BBQKees board (https://bbqkees-electronics.nl/wiki/_images/gateway-1-7-internals.jpg) has GND, A0, D0 and D6 exposed on a separate header. D6 would, if not used internally by the EMS/iRT interface, be a good candidate to to control a relay to connect/disconnect the thermostat when switching between passive an active mode.