ssd_shelf.md

Assemble the SSD Shelf

{{BOM}}

Position the drives {pagestep}

• Take the SSD shelf{qty:1, cat:printed} you printed earlier
• Position two 2.5 inch SSD drives{qty:2, cat:net} on the shelf so that the conectores are visible at the rear

Secure the SSDs {pagestep}

• Each drive is secured with four our M3x6mm low profile cap screws{qty:8}
• Lift the dive so that it aligns with the holes. Secure the screw with a 2.5mm Allen key{qty:1, cat:tool}

[Assembled SSD shelf]{output, qty:1, hidden}