WIZ5XXSR-RP-C is used for WIZ500SR-RP, WIZ505SR-RP and WIZ510SR-RP.
These sections will provide informations about WIZ500SR-RP, WIZ505SR-RP and WIZ510SR-RP, which are S2E(Serial to Ethernet) modules using WIZ5XXSR-RP-C, and how to configure development environment to develop and modify WIZ5XXSR-RP-C.
To develop and modify WIZ5XXSR-RP-C, the development environment must be configured so that RP2040 can be used.
WIZ5XXSR-RP-C was developed by configuring the development environment for Windows, When configuring the development environment, refer to the '9.2. Building on MS Windows' section of 'Getting started with Raspberry Pi Pico' document below to configure the development environment.
If you want development environments other than the development environment for Windows, note that you can find other ways to configure development environment in 'Chapter 9. Building on other platforms' section of the document above.
The WIZ5XXSR-RP-C use WIZ500SR-RP, WIZ505SR-RP and WIZ510SR-RP - S2E(Serial to Ethernet) modules built on RP2040 and WIZnet's W5100S ethernet chip.
For detailed information about each product using WIZ5XXSR-RP-C, refer to the link below.
