DB AliceVision for Nokia 7 Plus

[LambaFlips]

Hi

Here is the console message:
[16:54:37.875188][error] image: 'IMG_20181104_163601.jpg'
- camera brand:
- camera model: Nokia 7 plus

[16:54:37.875188][error] Please add camera model(s) and sensor width(s) in the database.

I tried to insert various lines like

Nokia;Nokia 7 plus;2.55

but without success

tips?

https://www.devicespecifications.com/en/model/290e4872

[natowi]

The correct value is Nokia;Nokia 7 plus;5.75
(https://github.com/alicevision/meshroom/wiki/Add-Camera-to-database)

[LambaFlips]

Thanks for your help

unfortunately it is not good with your suggestion, same error

[16:54:37.875188][error] image: 'IMG_20181104_163601.jpg'

• camera brand:
• camera model: Nokia 7 plus

[16:54:37.875188][error] Please add camera model(s) and sensor width(s) in the database.

[natowi]

I tested Meshroom with Nokia 7 plus sample images - they load with default values (->Make is empty). When I add the camera Make "Nokia" to the Exif, the images are loaded with the sensordb info.

• Check the Exif data of your images. It should contain Make: Nokia and Model: Nokia 7 plus.

You could also add the following line to the database:

;Nokia 7 plus;5.75

[LambaFlips]

Hello,

thanks for the help, yes, in the EXIF of the photos, as "MAKE", the word "Nokia" was missing

now it's processing, thank you!