README.md

MMM-GoogleFit

A magic mirror module to grab google fit daily step count and daily weights.

This module is not maintained and will not recieve any support from me.

What it Looks Like

Normal Usage:

Colored Rings (each new color means 1x base step count):

NEW - Optional Icons (Now enabled by default)

Authentication Flow:

Installing

This module is pretty simple to set up. You simply need to clone the module into your modules folder (like other modules).

$ cd MagicMirror/modules
$ git clone https://github.com/amcolash/MMM-GoogleFit.git

Then add the following to MagicMirror/config/config.js and optionally configure any options below.

{
    module: 'MMM-GoogleFit',
    position: 'position',
    config: {
        // If desired
    }
},

Finally, restart your magic mirror.

You will need to authenticate with google fit for this module to work. Follow the onscreen instructions which should tell you to visit https://google.com/device and input the code displayed. Simply enter the code and allow the module to access your google fit data. That's it!

Configuration Options

Below are listed all possible configuration options for this module.

SOME VALUES HAVE CHANGED SINCE THIS MODULE WAS FIRST PUBLISHED. CHECK YOUR CONFIG.

Note; If you want to use metric/imperial units for weights (or if they are not what you expect), please set the according units inside of your base config/config.js file as listed in the magic mirror instructions here.

Option	Description
updateInterval	How often to update (in minutes) Possible values: number Default value: 30
stepGoal	How many steps you want to take each day (to fill pie chart) Possible values: number Default value: 10000
startOnMonday	If the calendar view should start on Sunday (default) or Monday. Possible values: boolean Default value: false
lastSevenDays	If the calendar view should show the last 7 days or if it should show the current week (default). Note: This setting takes priority over startOnMonday. Possible values: boolean Default value: false
reverseOrder	Reverses the calendar view ordering - so the last day is on the left instead of the right. Possible values: boolean Default value: false
displayWeight	If the module should show weight data. Possible values: boolean Default value: true
chartWidth	How wide the chart portion of the module should be (in pixels), excludes icons Possible values: number Default value: 300
chartPadding	Percent of available chart width dedicated to padding. If each ring takes 50px and there is 0.2 (percent) padding, then 10px are used for padding, making the chart 40px. Possible values: number (between 0 - 1) Default value: 0.2
innerThickness	How thick inside gap of the chart rings should be (percent), where 0 = no innner gap and 1 = only gap, no visible chart. Possible values: number (between 0 - 1) Default value: 0.8
fontSize	Font size Possible values: number Default value: 18
stepCountLabel	Enable step count to be listed below the step rings Possible values: boolean Default value: false
useIcons	Enable icons on the side of the module Possible values: boolean Default value: true
colors	Array of colors for the step counter Possible values: Array[#hexColor] Default value: ["#EEEEEE", "#1E88E5", "#9CCC65", "#5E35B1", "#FFB300", "#F4511E"]
debug	Turn on debug mode? Possible values: boolean Default value: false

Multiple Instances of the Module

This module can be used multiple times on the mirror (for different users) with some work, however this is not fully supported out of the box. Check out this github issue for instructions.

Libraries Used

This module (like most open source) has some help from others, shoutout to the authors and contributors! Cheers

• Beautiful and responsive charts from HighCharts
• Icons from the lovely people at icons8
• Saving a json file (because it is easier) with jsonfile