CONFIG.H

#pragma once

#include <Arduino.h>
//#include <TelnetStream.h>

//Set to the proper port for your USB connection - SerialUSB on Due (Native) or Serial for Due (Programming) or Teensy
#define SERIALCONSOLE   Serial



#define REG_DEV_STATUS      1
#define REG_GPAI            1
#define REG_VCELL1          3
#define REG_VCELL2          5
#define REG_VCELL3          7
#define REG_VCELL4          9
#define REG_VCELL5          0xB
#define REG_VCELL6          0xD
#define REG_TEMPERATURE1    0xF
#define REG_TEMPERATURE2    0x11
#define REG_ALERT_STATUS    0x20
#define REG_FAULT_STATUS    0x21
#define REG_COV_FAULT       0x22
#define REG_CUV_FAULT       0x23
#define REG_ADC_CTRL        0x30
#define REG_IO_CTRL         0x31
#define REG_BAL_CTRL        0x32
#define REG_BAL_TIME        0x33
#define REG_ADC_CONV        0x34
#define REG_ADDR_CTRL       0x3B

#define MAX_MODULE_ADDR     0x3E

#define EEPROM_VERSION      0x12    //update any time EEPROM struct below is changed.
#define EEPROM_PAGE         0