diff --git a/examples/00-mapdl-examples/slashmap_cfx_mapping.py b/examples/00-mapdl-examples/slashmap_cfx_mapping.py
new file mode 100644
index 0000000000..57b3ad5662
--- /dev/null
+++ b/examples/00-mapdl-examples/slashmap_cfx_mapping.py
@@ -0,0 +1,123 @@
+"""
+.. _ref_cfx_mapping:
+
+=============================================
+CFX pressure data mapping to structural blade
+=============================================
+
+The objective of this test is to demonstrate CFX pressure data mapping to
+structural 11 blade model in PyMAPDL.
+
+Description
+===========
+
+The 11 blade model along with a fictitious disk is modeled. CFX generated
+pressure data is used as input.
+
+The test uses a CFX exported pressure data to map. Pressure file
+correspond to a certain vibrating blade mode (vibrating mode 1
+approximately 534 Hz)and to a certain pressure mode (pressure mode 1
+also the same 534 Hz mode). However, due to lack of data for another
+mode this same file will be assumed to represent other mode
+combinations (vib mode 2 press mode 2) (vib mode 1 press mode 2)
+(vib mode 2 press mode 1).
+
+"""
+
+from datetime import datetime
+
+from ansys.mapdl.core import launch_mapdl
+from ansys.mapdl.core.examples import download_cfx_mapping_example_data
+
+###############################################################################
+# Downloading files
+# =================
+#
+files_path = download_cfx_mapping_example_data()
+
+db_file_path = files_path["model"]
+pressure_file_path = files_path["data"]
+
+###############################################################################
+# Launch MAPDL service
+# ====================
+#
+
+mapdl = launch_mapdl()
+
+mapdl.title(
+    "Verify Pressure Data Mapping exported from CFX on Structural 11 Blade Model"
+)
+
+###############################################################################
+# Upload files to the instance
+# ============================
+#
+# Uploading files
+mapdl.upload(db_file_path)
+mapdl.upload(pressure_file_path)
+
+
+###############################################################################
+# Pressure mapping
+# ================
+#
+# Resume the database from the example mapping file
+mapdl.resume("ExampleMapping", "db")
+mapdl.esel("s", "type", "", 1)
+mapdl.cm("BladeElem", "elem")
+
+# Write CDB file
+mapdl.allsel()
+mapdl.cdwrite("all", "baseModel", "cdb")
+mapdl.finish()
+
+# Start the mapping processor and record the start time
+start_time = datetime.now()
+mapdl.slashmap()  # mapdl.slashmap(**kwargs); Enters the mapping processor.
+print("Enter the Mapping Processor")
+
+# Specifies the target nodes for mapping pressures onto surface effect elements.
+mapdl.run("target,pressure_faces")
+
+# Specifies the file type and pressure type for the subsequent import of source points and pressures.
+mapdl.ftype(filetype="cfxtbr", prestype="1")
+# Read the CFX exported file containing pressure data Blade 2, Export Surface 1
+mapdl.read(fname="11_blades_mode_1_ND_0.csv")
+
+# Perform the pressure mapping from source points to target surface elements.
+# Interpolation is done on a surface (default).
+print(mapdl.map(kdim="2", kout="1"))
+
+###############################################################################
+# Plot mapping
+# ============
+#
+# Plot the geometries and mappings
+mapdl.show("png,rev")
+mapdl.plgeom(item="BOTH")  # Plot both target and source geometries (default).
+mapdl.plmap(item="target")
+mapdl.plmap(item="target", imagkey="1")
+mapdl.plmap(item="source")
+mapdl.plmap(item="source", imagkey="1")
+mapdl.plmap(item="both")
+mapdl.plmap(item="both", imagkey="1")
+
+# Close the plot and write the mapped data to a file
+mapdl.show("close")
+mapdl.writemap("mappedHI.dat")
+
+# Print the mapping completion message and duration
+print("Mapping Completed")
+end_time = datetime.now()
+c = end_time - start_time
+seconds = c.total_seconds()
+print("\nDuration in seconds for Mapping is  : ", seconds)
+
+mapdl.eplot()
+
+###############################################################################
+# Stop MAPDL
+#
+mapdl.finish()
+mapdl.exit()
diff --git a/src/ansys/mapdl/core/examples/__init__.py b/src/ansys/mapdl/core/examples/__init__.py
index cab9a9bac2..497c14d3b4 100644
--- a/src/ansys/mapdl/core/examples/__init__.py
+++ b/src/ansys/mapdl/core/examples/__init__.py
@@ -1,4 +1,4 @@
 from .downloads import *
-from .downloads import _download_rotor_tech_demo_plot
+from .downloads import _download_rotor_tech_demo_plot, download_cfx_mapping_example_data
 from .examples import *
 from .verif_files import vmfiles
diff --git a/src/ansys/mapdl/core/examples/downloads.py b/src/ansys/mapdl/core/examples/downloads.py
index 3952703494..24ef04aa18 100644
--- a/src/ansys/mapdl/core/examples/downloads.py
+++ b/src/ansys/mapdl/core/examples/downloads.py
@@ -131,3 +131,30 @@ def download_manifold_example_data() -> dict:
             filename="manifold_cht-final_temp.csv", directory=files_dir
         )[0],
     }
+
+
+def download_cfx_mapping_example_data() -> dict:  # pragma: no cover
+    """Download the CFX mapping data and return the
+    download paths into a dictionary domain id->path.
+    Examples files are downloaded to a persistent cache to avoid
+    re-downloading the same file twice.
+    Returns
+    -------
+    dict[str:str]
+        Path to the example files.
+    Examples
+    --------
+    >>> from ansys.mapdl.core.examples import download_cfx_mapping_example_data
+    >>> paths = download_cfx_mapping_example_data()
+    >>> paths
+    {data: 'C:\\Users\\user\\AppData\\Local\\ansys_mapdl_core\\ansys_mapdl_core\\examples\\11_blades_mode_1_ND_0.csv',
+     model: 'C:\\Users\\user\\AppData\\Local\\ansys_mapdl_core\\ansys_mapdl_core\\examples\\ExampleMapping.db'}
+    """
+
+    files_dir = "pymapdl/cfx_mapping"
+    return {
+        "data": _download_file(
+            filename="11_blades_mode_1_ND_0.csv", directory=files_dir
+        )[0],
+        "model": _download_file(filename="ExampleMapping.db", directory=files_dir)[0],
+    }
diff --git a/tests/test_examples.py b/tests/test_examples.py
index e8d3506e60..da00ba8d18 100644
--- a/tests/test_examples.py
+++ b/tests/test_examples.py
@@ -4,7 +4,11 @@
 import pytest
 
 from ansys.mapdl.core import examples
-from ansys.mapdl.core.examples.downloads import _download_file, download_example_data
+from ansys.mapdl.core.examples.downloads import (
+    _download_file,
+    download_cfx_mapping_example_data,
+    download_example_data,
+)
 
 
 def test_load_verif():
@@ -33,3 +37,7 @@ def test_failed_download():
     filename = "non_existing_file"
     with pytest.raises(RuntimeError):
         _download_file(filename, directory=None)
+
+
+def test_download_cfx_mapping_example_data():
+    assert download_cfx_mapping_example_data() is not None