Skip to content
This repository has been archived by the owner on Dec 18, 2018. It is now read-only.

Latest commit

 

History

History
145 lines (90 loc) · 12.1 KB

TransportProtocols.md

File metadata and controls

145 lines (90 loc) · 12.1 KB

Transport Protocols

This document describes the protocols used by the three ASP.NET Endpoint Transports: WebSockets, Server-Sent Events and Long Polling

Transport Requirements

A transport is required to have the following attributes:

  1. Duplex - Able to send messages from Server to Client and from Client to Server
  2. Binary-safe - Able to transmit arbitrary binary data, regardless of content
  3. Text-safe - Able to transmit arbitrary text data, preserving the content. Line-endings must be preserved but may be converted to a different format. For example \r\n may be converted to \n. This is due to quirks in some transports (Server Sent Events). If the exact line-ending needs to be preserved, the data should be sent as a Binary message.

The only transport which fully implements the duplex requirement is WebSockets, the others are "half-transports" which implement one end of the duplex connection. They are used in combination to achieve a duplex connection.

Throughout this document, the term [endpoint-base] is used to refer to the route assigned to a particular end point. The term [connection-id] is used to refer to the connection ID provided by the POST [endpoint-base]/negotiate request.

NOTE on errors: In all error cases, by default, the detailed exception message is never provided; a short description string may be provided. However, an application developer may elect to allow detailed exception messages to be emitted, which should only be used in the Development environment. Unexpected errors are communicated by HTTP 500 Server Error status codes or WebSockets non-1000 Normal Closure close frames; in these cases the connection should be considered to be terminated.

POST [endpoint-base]/negotiate request

The POST [endpoint-base]/negotiate request is used to establish a connection between the client and the server. The content type of the response is application/json. The response to the POST [endpoint-base]/negotiate request contains one of three types of responses:

  1. A response that contains the connectionId which will be used to identify the connection on the server and the list of the transports supported by the server.
{
  "connectionId":"807809a5-31bf-470d-9e23-afaee35d8a0d",
  "availableTransports":[
    {
      "transport": "WebSockets",
      "transferFormats": [ "Text", "Binary" ]
    },
    {
      "transport": "ServerSentEvents",
      "transferFormats": [ "Text" ]
    },
    {
      "transport": "LongPolling",
      "transferFormats": [ "Text", "Binary" ]
    }
  ]
}

The payload returned from this endpoint provides the following data:

  • The connectionId which is required by the Long Polling and Server-Sent Events transports (in order to correlate sends and receives).
  • The availableTransports list which describes the transports the server supports. For each transport, the name of the transport (transport) is listed, as is a list of "transfer formats" supported by the transport (transferFormats)
  1. A redirect response which tells the client which URL and optionally access token to use as a result.
{
  "url": "https://myapp.com/chat",
  "accessToken": "accessToken"
}

The payload returned from this endpoint provides the following data:

  • The url which is the URL the client should connect to.
  • The accessToken which is an optional bearer token for accessing the specified url.
  1. A response that contains an error which should stop the connection attempt.
{
  "error": "This connection is not allowed."
}

The payload returned from this endpoint provides the following data:

  • The error that gives details about why the negotiate failed.

Transfer Formats

ASP.NET Endpoints support two different transfer formats: Text and Binary. Text refers to UTF-8 text, and Binary refers to any arbitrary binary data. The transfer format serves two purposes. First, in the WebSockets transport, it is used to determine if Text or Binary WebSocket frames should be used to carry data. This is useful in debugging as most browser Dev Tools only show the content of Text frames. When using a text-based protocol like JSON, it is preferable for the WebSockets transport to use Text frames. How a client/server indicate the transfer format currently being used is implementation-defined.

Some transports are limited to supporting only Text data (specifically, Server-Sent Events). These transports cannot carry arbitrary binary data (without additional encoding, such as Base-64) due to limitations in their protocol. The transfer formats supported by each transport are described as part of the POST [endpoint-base]/negotiate response to allow clients to ignore transports that cannot support arbitrary binary data when they have a need to send/receive that data. How the client indicates the transfer format it wishes to use is also implementation-defined.

WebSockets (Full Duplex)

The WebSockets transport is unique in that it is full duplex, and a persistent connection that can be established in a single operation. As a result, the client is not required to use the POST [endpoint-base]/negotiate request to establish a connection in advance. It also includes all the necessary metadata in it's own frame metadata.

The WebSocket transport is activated by making a WebSocket connection to [endpoint-base]. The optional id query string value is used to identify the connection to attach to. If there is no id query string value, a new connection is established. If the parameter is specified but there is no connection with the specified ID value, a 404 Not Found response is returned. Upon receiving this request, the connection is established and the server responds with a WebSocket upgrade (101 Switching Protocols) immediately ready for frames to be sent/received. The WebSocket OpCode field is used to indicate the type of the frame (Text or Binary).

Establishing a second WebSocket connection when there is already a WebSocket connection associated with the Endpoints connection is not permitted and will fail with a 409 Conflict status code.

Errors while establishing the connection are handled by returning a 500 Server Error status code as the response to the upgrade request. This includes errors initializing EndPoint types. Unhandled application errors trigger a WebSocket Close frame with reason code that matches the error as per the spec (for errors like messages being too large, or invalid UTF-8). For other unexpected errors during the connection, a non-1000 Normal Closure status code is used.

HTTP Post (Client-to-Server only)

HTTP Post is a half-transport, it is only able to send messages from the Client to the Server, as such it is always used with one of the other half-transports which can send from Server to Client (Server Sent Events and Long Polling).

This transport requires that a connection be established using the POST [endpoint-base]/negotiate request.

The HTTP POST request is made to the URL [endpoint-base]. The mandatory id query string value is used to identify the connection to send to. If there is no id query string value, a 400 Bad Request response is returned. Upon receipt of the entire payload, the server will process the payload and responds with 200 OK if the payload was successfully processed. If a client makes another request to / while an existing request is outstanding, the new request is immediately terminated by the server with the 409 Conflict status code.

If a client receives a 409 Conflict request, the connection remains open. Any other response indicates that the connection has been terminated due to an error.

If the relevant connection has been terminated, a 404 Not Found status code is returned. If there is an error instantiating an EndPoint or dispatching the message, a 500 Server Error status code is returned.

Server-Sent Events (Server-to-Client only)

Server-Sent Events (SSE) is a protocol specified by WHATWG at https://html.spec.whatwg.org/multipage/comms.html#server-sent-events. It is capable of sending data from server to client only, so it must be paired with the HTTP Post transport. It also requires a connection already be established using the POST [endpoint-base]/negotiate request.

The protocol is similar to Long Polling in that the client opens a request to an endpoint and leaves it open. The server transmits frames as "events" using the SSE protocol. The protocol encodes a single event as a sequence of key-value pair lines, separated by : and using any of \r\n, \n or \r as line-terminators, followed by a final blank line. Keys can be duplicated and their values are concatenated with \n. So the following represents two events:

foo: bar
baz: boz
baz: biz
quz: qoz
baz: flarg

foo: boz

In the first event, the value of baz would be boz\nbiz\nflarg, due to the concatenation behavior above. Full details can be found in the spec linked above.

In this transport, the client establishes an SSE connection to [endpoint-base] with an Accept header of text/event-stream, and the server responds with an HTTP response with a Content-Type of text/event-stream. The mandatory id query string value is used to identify the connection to send to. If there is no id query string value, a 400 Bad Request response is returned, if there is no connection with the specified ID, a 404 Not Found response is returned. Each SSE event represents a single frame from client to server. The transport uses unnamed events, which means only the data field is available. Thus we use the first line of the data field for frame metadata.

The Server-Sent Events transport only supports text data, because it is a text-based protocol. As a result, it is reported by the server as supporting only the Text transfer format. If a client wishes to send arbitrary binary data, it should skip the Server-Sent Events transport when selecting an appropriate transport.

When the client has finished with the connection, it can terminate the event stream connection (send a TCP reset). The server will clean up the necessary resources.

Long Polling (Server-to-Client only)

Long Polling is a server-to-client half-transport, so it is always paired with HTTP Post. It requires a connection already be established using the POST [endpoint-base]/negotiate request.

Long Polling requires that the client poll the server for new messages. Unlike traditional polling, if there is no data available, the server will simply wait for messages to be dispatched. At some point, the server, client or an upstream proxy will likely terminate the connection, at which point the client should immediately re-send the request. Long Polling is the only transport that allows a "reconnection" where a new request can be received while the server believes an existing request is in process. This can happen because of a time out. When this happens, the existing request is immediately terminated with status code 204 No Content. Any messages which have already been written to the existing request will be flushed and considered sent. In the case of a server side timeout with no data, a 200 OK with a 0 Content-Length will be sent and the client should poll again for more data.

A Poll is established by sending an HTTP GET request to [endpoint-base] with the following query string parameters

  • id (Required) - The Connection ID of the destination connection.

When data is available, the server responds with a body in one of the two formats below (depending upon the value of the Accept header). The response may be chunked, as per the chunked encoding part of the HTTP spec.

If the id parameter is missing, a 400 Bad Request response is returned. If there is no connection with the ID specified in id, a 404 Not Found response is returned.

When the client has finished with the connection, it can issue a DELETE request to [endpoint-base] (with the id in the querystring) to gracefully terminate the connection. The server will complete the latest poll with 204 to indicate that it has shut down.