DOMUSTO website: https://domusto.com/

⚠️ This project in alpha-state, so things might not work as expected. ⚠️

Introduction

DOMUSTO is versatile, extensible, plugin driven home automation software written in NodeJS. DOMUSTO is developed to run on a Raspberry Pi, but other Linux based systems should work as well.

The command line tool covers easy maintenance and plugin management. Screenshots can be found on the DOMUSTO client Github page.

Documentation

• Installation guide
• Plugin guide
• Maintenance guide
• Command line tool
• API guide

Frontend

Once the DOMUSTO server runs you can install the DOMUSTO client from https://github.com/basvdijk/domusto-client

Plugins

Plugin	Description
Timer	Switch based on specific time or sunset, sunrise etc.
GPIO Pins for RPI	Control the GPIO pins on a Raspberry Pi
Marantz	Control your Marantz receiver
Nefit Easy	Read the temperature of Nefit Easy thermostat
P1 smart meter	Read the electrical smartmeter with P1 protocol
Philips HUE	Control Philips HUE lights
PushBullet	Sends push messages to devices with the Pushbullet.com API
RFXcom	Send and receive 433Mhz signals with RFXcom usb transceiver
Shell executer	Execute shell commands on an DOMUSTO signal

Tested hardware

• RFXcom

  • Weather
    • 433MHz Wireless Remote Weather Station Digital Thermometer Humidity Sensor
  • Switch
    • Klik-Aan-Klik-Uit / KAKU
    • Click-On-Click-Off / COCO
  • Select Plus Chime Doorbell

• P1 (via P1 to usb converter)

  • Landis+Gyr E350

• Marantz

  • SR6010 Receiver

Cost overview

Item	Model	Price	Store
RFXcom 433mhz tranceiver	RFXtrx433E	€ 109,95	online
Smart meter cable	P1 Smart meter cable	€ 19,95	online
RPI, power adapter, sd card	RPI3B starter kit	€ 58,95	online
RPI, power adapter, sd card, RFXcom**	RPI3B starter kit + RFXtrx433E	€ 145,95	online
Wireless doorbell	Select Plus 433mhz wireless doorbell	€ 5,95	Action
2x wall plug + remote	KaKu APA2-2300R	€ 24,99	DIY store*
3x wall plug + remote	KaKu APA3-1500R	€ 29,99	DIY store*
Sunscreen controller	KaKu ASUN-650	€ 41,99	DIY store*
Wall push button	KaKu AWST-8800	€ 20,99	DIY store*
Wall dual push button	KaKu AWST-8802	€ 22,99	DIY store*
Build-in TL-light switch***	KaKu AWMR-300	€ 31,99	DIY store*
Build-in switch	KaKu AMU-500	€ 34,99	DIY store*
Temp + Humidity sensor	433MHz Weather Humidity	€ 6,77	Banggood

*   Dutch DIY stores like Gamma and Karwei reguarly have discounts on KaKu devices
**  The kit comes without a SD card, make sure you order it when you don't have one
*** For TL-light make sure you use the AWMR-300 and NOT the AWMR-230