Add files

.gitignore

@@ -0,0 +1,10 @@
+.DS_Store
+cmake-build-debug/
+CMakeLists.txt
+.pioenvs
+.piolibdeps
+CMakeListsPrivate.txt
+.travis.yml
+platformio.ini
+src/
+lib/

CHANGELOG.md

@@ -0,0 +1,14 @@
+## 2019-11-28
+ * Updated timing for reading/writing to the sensor to work on ESP32
+
+## 2017-08-27
+ * Updated coefficients according to the v5 datasheet
+ * Added voltage parameter to constructor
+ * Code cleanup
+
+## 2011-09-20
+ * Conditionally include Arduino.h for compatibility with Arduino 1.0
+
+## 2010-07-23
+ * Added SHT7x to list of supported sensors.
+ * Fixed temperature offset in humidity calculation.

DISTRIBUTION

@@ -0,0 +1,11 @@
+Copyright 2019 Bernd Giesecke beegee@giesecke.tk / <https://www.desire.giesecke.tk>
+Copyright 2017 Vincent Pang <wingshun.pang@gmail.com>
+Copyright 2009 Jonathan Oxer <jon@oxer.com.au> / <www.practicalarduino.com>
+Copyright 2008 Maurice Ribble <ribblem@yahoo.com> / <www.glacialwanderer.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+http://www.gnu.org/licenses/

LICENSE.txt

@@ -0,0 +1,11 @@
+Copyright 2019 Bernd Giesecke beegee@giesecke.tk / <https://www.desire.giesecke.tk>
+Copyright 2017 Vincent Pang <wingshun.pang@gmail.com>
+Copyright 2009 Jonathan Oxer <jon@oxer.com.au> / <www.practicalarduino.com>
+Copyright 2008 Maurice Ribble <ribblem@yahoo.com> / <www.glacialwanderer.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+http://www.gnu.org/licenses/

README.md

@@ -1,2 +1,91 @@
-# SHT1x-ESP
-Arduino ESP library for SHT1x Temp & Humidity Sensors for ESP32
+# SHT1x Temperature / Humidity Sensor Library for Arduino
+Copyright 2019 Bernd Giesecke beegee@giesecke.tk / https://www.desire.giesecke.tk    
+Copyright 2017 Vincent Pang wingshun.pang@gmail.com  
+Copyright 2009 Jonathan Oxer jon@oxer.com.au / http://www.practicalarduino.com  
+Copyright 2008 Maurice Ribble ribblem@yahoo.com / http://www.glacialwanderer.com
+
+Provides a simple interface to the SHT1x series (SHT10, SHT11, SHT15)
+and SHT7x series (SHT71, SHT75) temperature / humidity sensors from
+Sensirion, http://www.sensirion.com. These sensors use a "2-wire"
+communications buss that is similar to I2C and can co-exist on the same
+physical wire as I2C devices.
+
+## Updated 2019 to work with ESP32 and ESP8266.   
+Update was necessary because there was no timing control on the clock pulses and the timeout while waiting for the ACK from the sensor was too short. This caused most of the time a timeout while waiting for the sensor to finish its measurement.
+
+## Installation
+In Arduino IDE open Sketch->Include Library->Manage Libraries then search for SHT1x-ESP
+In PlatformIO open PlatformIO Home, switch to libraries and search for SHT1x-ESP. Or install the library in the terminal with platformio lib install SHT1x-ESP
+
+For manual installation download the archive, unzip it and place the SHT1x-ESP folder into the library directory.
+In Arduino IDE this is usually <arduinosketchfolder>/libraries/    
+In PlatformIO this is usually <user/.platformio/lib>
+
+## Usage
+The library is instantiated as an object with methods provided to read
+relative humidity and temperature. Include it in your sketch and then
+create an object, specifying the pins to use for communication with the
+sensor:
+
+    #include <SHT1x.h>
+
+    #define dataPin 10
+    #define clockPin 13
+
+    // default to 5.0v boards, e.g. Arduino UNO
+    SHT1x sht1x(dataPin, clockPin);
+
+    // if 3.3v board is used
+    SHT1x sht1x(dataPin, clockPin, SHT1x::Voltage::DC_3_3v);
+
+You can then call methods on that object within your program. In this
+example we created an object called "sht1x", but it could have been
+called whatever you like. A complete example program is included with
+the library and can be accessed from the File->Examples->SHT1x menu.
+
+### readTemperatureC() ###
+
+Returns a float within the valid range of the sensor of -40 to +123.8C.
+
+Example:
+
+    float tempC = sht1x.readTemperatureC();
+
+### readTemperatureF() ###
+
+Returns a float within the valid range of the sensor of -40 to +254.9F.
+
+Example:
+
+    float tempF = sht1x.readTemperatureF();
+
+### readHumidity() ###
+
+Returns a float within the valid range of the sensor of 0 to 100%.
+
+Example:
+
+    float humidity = sht1x.readHumidity();
+
+## More Info
+### Coefficients ###
+This library is updated with the latest coefficients according to the datasheet v5.  
+https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Sensirion_Humidity_Sensors_SHT1x_Datasheet_V5.pdf
+
+The coefficients are different slightly between each stated voltages. Only the values for 5v, 4v, 3.5v, 3v and 2.5v are stated in the datasheet. The values for the common 3.3v are missing. So the values used for 3.3v in this library are calculated by linear interpolation.
+
+### 11ms start up time ###
+From the datasheet, "After power-up the sensor needs 11ms to get to Sleep State. No commands must be sent before that time."
+
+### Maximum one measurement per second ###
+From the datasheet, "To keep self heating below 0.1°C, SHT1x should not be active for more than 10% of the time – e.g. maximum one measurement per second at 12bit accuracy shall be made."
+
+### Measurement blocking time, around 320ms ###
+From the datasheet, "This takes a maximum of 20/80/320 ms for a 8/12/14bit measurement. The time varies with the speed of the internal oscillator and can be lower by up to 30%."
+
+### Settings used in this library ###
+In case you are interested in the settings used by this library, here you are.
+- 14 bit resolution (max) is used for temperature measurement.
+- 12 bit resolution (max) is used for humidity measurement.
+- No crc checking is done after each reading from sensor.
+- Datatype "double" is used in the internal calculation in order to preserve precision. And "float" is used in final result.